Korg D3200 owner manual 155, Stereo Flanger, Stereo Phaser, Stereo Vibrato

Category: Modulation&Pitch

Modulation/Pitch-type effects

14: Stereo Chorus

This effect adds thickness and warmth to the sound by mod- ulating the delay time of the input signal. You can control the spaciousness of the sound by offsetting the phase of the left and right LFOs from each other.

*Speed (LFO Speed)	0.02...20.00Hz
	Sets the LFO speed
*Depth	0...100
	Sets the depth of LFO modulation
L-R Phase (LFO L-R Phase)	–180...+180deg
Sets the LFO phase difference between the left and right
Dry:Wet	Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
L PreDly (L Pre Delay)	0.0...50.0msec
	Sets the left delay time
R PreDly (R Pre Delay)	0.0...50.0msec
	Sets the right delay time
Waveform (LFO Waveform)	Triangle, Sine
	Selects LFO Waveform
Spread	0...100%
Sets the width of the stereo image of the effect sound
LoDamp (Low Damp)	THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
HiDamp (High Damp)	53Hz...20.0kHz, THRU

Sets the damping amount in the high range

: L Pre Delay [msec], : R Pre Delay [msec]

Setting the left and right delay time individually allows you to control the stereo image.

15: Stereo Flanger

This effect gives a significant swell and movement of pitch to the sound. It is more effective when applied to a sound with a lot of harmonics. This is a stereo flanger. You can add spread to the sound by offsetting the phase of the left and right LFOs from each other.

*Speed (LFO Speed)	0.02...20.00Hz
	Sets the LFO speed
*Depth	0...100
Sets the depth of LFO modulation
Fdback (Feedback)	–100...+100%
	Sets the feedback amount
Dry:Wet	Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Waveform (LFO Waveform)	Triangle, Sine
	Selects LFO Waveform
LFO Shape (LFO Shape)	–100...+100%
Determines how much the LFO waveform is changed
Fb HiCut (Feedback High Cut)	53Hz...20.0kHz, THRU
Sets the feedback damping amount in the high range
L-R Phase (LFO L-R Phase)	–180...+180deg
Sets the LFO phase difference between the left and right
Delay	0...50.0ms
	Sets the left/right delay time
LoDamp (Low Damp)	THRU, 21Hz...8.00kHz
Sets the damping amount in the low range
HiDamp (High Damp)	53Hz...20.0kHz, THRU

Sets the damping amount in the high range

: LFO Shape

Changing the LFO waveform shape controls the peak sweep of flanging effects.

: Feedback, : Dry:Wet

The peak shape of the positive and negative “Feedback” value is different. The harmonics will be emphasized when the effect sound is mixed with the dry sound if you set a positive value for both “Feedback” and “Dry:Wet”, and if you set a negative value for both “Feedback” and “Dry:Wet”.

: Feedback High Cut

This parameter sets the amount of damping of the feedback in the high range. Increasing the value will cut high-range har- monics.

16: Stereo Phaser

This effect creates a swell by shifting the phase. It is very ef- fective on electric piano sounds. This is a stereo effect, and you can control the spaciousness of the sound by offsetting the phase of the left and right LFOs from each other.

*Speed (LFO Speed)	0.02...20.00Hz
	Sets the LFO speed
Depth	0...100
Sets the depth of LFO modulation
Resonance	–100...+100%
	Sets the resonance amount
Dry:Wet	Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Manual	0...100
Sets the frequency to which the effect is applied
LFO Shape	–100...+100
Determines how much the LFO waveform is changed
Reso HiCut (Resonance High Cut)	53Hz...20.0kHz, THRU
Sets the resonance damping amount in the high range
L-R Phase (LFO L-R Phase)	–180...+180deg
Sets the LFO phase difference between the left and right
Waveform (LFO Waveform)	Triangle, Sine
	Selects LFO Waveform
Type	Blue, U-VB
	Selects the type of phaser

: Resonance, : Dry:Wet

The peak shape of the positive and negative Feedback value is different. The harmonics will be emphasized when the effect sound is mixed with the dry sound, if you set a positive value for both “Resonance” and “Dry:Wet”, and if you set a negative value for both “Resonance” and “Dry:Wet”.

: Resonance High Cut

This parameter sets the amount of damping of the resonance in the high range. Increasing the value will cut high-range har- monics.

17: Stereo Vibrato

This effect cyclically varies the pitch of the input signal. You can use an envelope to control the width of the modulation.

*Speed (LFO Speed)	0.02...20.00Hz
	Sets the LFO speed
Depth	0...100
Sets the depth of LFO modulation
Env.Control (Envelope Control)	0...100%

Sets the amount of depth that will be controlled by the envelope

Dry:Wet	Dry, 1:99...99:1, Wet
	Sets the balance between the effect and dry sounds
Thresold	–48.0...0.0dB

Sets the level at which the envelope control effect will be applied

Attack	0...1.00sec
	Sets the attack time for level control

Algorithm list
Program list
Stereo type	Algorithm
Monaural type	Algorithm

Effect

155