Korg D3200 owner manual 169

→The IN and OUT locations are the same, or the OUT location is earlier than the IN location.

Illegal Range. To = End or End < To.

The operation cannot be executed because there is a problem with the TO and END locations specified for track editing or loop playback.

→The TO and END locations are the same, or the END location is earlier than the TO location.

In ~ Out is out of range.

The operation cannot be executed because there is a problem with the IN and OUT locations specified for track editing or auto-punch recording.

→Set the IN–OUT region not to exceed 12 hours in length.

In ~ Out is too short.

There is not enough of an editing region for track editing to occur.

Insert next disc and press OK.

Insert the next disc.

Insufficient space available on the CD.

This CD-R/RW disc does not contain enough free space to write the selected data.

Maximum number of tracks is 99.

A maximum of 99 tracks can be written to one CD.

No audio events on the master track.

The master track does not contain any audio events.

No REC-READY tracks.

None of the tracks have been set to the record ready mode.

Not enough Memory.

The current recording or track editing operation would exceed the amount of memory space available.

→Delete unneeded track data from the song.

→In the TRACK, “EditTrk” tab page, execute “OptimizeTrk” operation. If error messages still appear after you execute “OptimizeTrk,” go to the SYSTEM/ MIDI, “DiskUtility” tab page and execute

“CheckDrive.”

Number of tracks does not match.

When executing a track edit operation, the number of tracks before and after the operation does not match.

Operation canceled.

The operation was canceled.

Repaired successfully.

When the hard drive was checked, errors found on the disk were repaired successfully. The audio data has also been completely recovered.

Repaired, but some audio data was lost.

When the hard drive was checked, errors were found on the disk. The drive was repaired, but some audio data could not be completely repaired. You may hear some “pops” in the sound.

→You can minimize the pops by executing

“ErasePunchNoise.”

Root Directory is full.

You have reached the maximum number of files or folders that can be saved in the root directory of the PC (USB) drive.

→Delete unneeded folders or files.

Sampling Frequency does not match.

The external sampling frequency clock does not match the sampling frequency of the current song.

Scrub Location exceeded song end.

The scrub function controlled by the SCRUB key is able to display the waveform in a range from the beginning to the end of the song.

If you press the SCRUB key at a location that is later than the end, this message will appear, and then the location will return to the end of the song.

Song Data error.

The song data contains an error, and cannot be selected or saved.

→Delete the song that cannot be selected or saved.

→Format the affected song drive.

Song End out of range.

Executing the track editing operation would cause the ending location of the song to exceed the allowable song length.

→A song cannot be more than 23:59:59.999 in length.

Song List data error.

The song list data contains an error, and the song cannot be selected or saved.

→Format the affected song drive.

S/P DIF Error occurred.

An error has occurred in the S/P DIF digital connection.

→Make sure that the external device is correctly connected to the D3200.

→Make sure that the optical digital cable is not faulty.

Tempo too fast.

When recording tempo, recording failed because the tempo was too fast.

→If you are recording MIDI Clock data, set the MIDI output device to a slightly slower tempo.

→If you are recording tap tempo, tap more slowly.

Tempo too slow.

When recording tempo, recording failed because the tempo was too slow.

→If you are recording MIDI Clock data, set the MIDI

output device to a tempo of =40 or faster.

→If you are recording tap tempo, tap more quickly.

The data is unchanged.

The operation was executed, but the results are identical to the previous state.

The location cannot be stored.

The current location cannot be stored.

This CD is not playable.

The CD cannot be played because is not an audio CD or because it has not been finalized.

IndexGlossaryShortcut keys Various lists Specifications More about drives Various messages Troubleshooting and files

Appendices

169