Korg D3200 owner manual 134, NoiseReduction, ErasePunchNoise, Before execution After execution

NoiseReduction

On the desired track, specify a region (IN–OUT) containing only noise which the D3200 will use to analyze and “learn” the noise component. This noise component will then be eliminated from the data in the other region you specify (TO– END) of the same track.

A1

A2

IN OUT TO END

Before execution

A region of only noise

(Learn Noise)The region from which you want to remove noise (Destination)

After execution

A1. Destination

[1...32, ML, MR, 1-2...31-32, MST, 1-4...29-32, 1-8...24-32, 1-16, 17-32, 1-32, ALL]

Select the track on which noise reduction will be per- formed.

For a 48 kHz/24-bit or 44.1 kHz/24-bit song, you can select only tracks 1–16.

A2. WAVE

This displays the waveform of the track audio, allowing you to set the editing locations (IN, OUT, TO, END) more accurately. (→p.128 Edit Type: “CopyTrk,” Wave dialog box)

ErasePunchNoise

This minimizes “pop” noises. Set the IN and OUT locations before and after the area where the noise occurs. You can also erase multiple occurrences of noise.

The “ErasePunchNoise Sens” value specifies the sensitivity at which noise will be detected. Normally, you should start by executing this command with a setting of “1”. Increase the setting if noise still remains.

A1

A3

A2

IN OUT

Before execution

After execution

A1. Destination

[1...32, ML, MR, 1-2...31-32, MST, 1-4...29-32, 1-8...24-32, 1-16, 17-32, 1-32, ALL]

Select the track from which punch noise will be erased.

For a 48 kHz/24-bit or 44.1 kHz/24-bit song, you can select only tracks 1–16.

A2. WAVE

This displays the waveform of the track audio, allowing you to set the editing locations (IN, OUT) more accu- rately. (→p.128 Edit Type: “CopyTrk,” Wave dialog box)

A3. Mode [0 dB...–63.5 dB]

Click the button to open the ErasePunchNoise Mode dia- log box, and use “ErasePunchNoise Sens” to specify the sensitivity at which noise will be detected.

Click the OK button (or press the panel YES key) to spec- ify the sensitivity, or click the Cancel button (or press the panel NO key) to cancel the setting.

134