
(5)Specify the number of time that you want to copy the data.
In the Times cell, specify the number of copies as “3”.
(3) | (2) | (4) | (6) |
(5)
(7)
(6)Select the expansion/compression mode.
Click the Mode button to display the ExpCmp Mode dialog box, select the desired mode, and click the OK button (or press the panel YES key).
For details on the effect of each mode, refer to “ExpCmp- Trk” (→p.131) A5. Mode.
For this example, select “Fast” (priority given to process- ing speed) and “Fixed” (pitch remains unchanged). Then click the OK button (or press the panel YES key) to return to the “EditTrk” tab page.
(7)Execute the editing operation.
Click the Exec. button. Then in the ExpCmpTrk dialog box, click the Yes button (or press the panel YES key) to execute the operation.
When the operation is finished, the display will indicate “Completed.” Click the OK button (or press the panel YES key).
(8)Check the results of the editing operation.
Press the LOC 3/TO key, and play back from the TO location to verify that the editing operation has done correctly.
If you are not satisfied with the results, you can use Undo to return to the previous state. (→p.141)
The length of the
Copy an entire track/Copying to a Virtual track (CopyWholeTrk)
This command copies an entire recorded track (from the be- ginning to the end) to another track.
•You can copy one or more tracks simultaneously.
•You can specify the
For example, you could use this operation if you wanted to copy a track to two or more virtual tracks, and then create variations of the performance in each of the those virtual tracks.
Copying to a virtual track
![]()
![]()
![]()
![]()
Copying the data of track 1 virtual track “A” to track 2 vir- tual track “B”
(1)Select the copy-source virtual track.
In the TRACK,
(2)Verify the copy-destination.
In the TRACK,
(3)Select “CopyWholeTrk.”
In the TRACK, “EditTrk” tab page, click the Edit Trk Type cell. In the Edit Trk Type dialog box, choose “Copy WholeTrk” and click the OK button (or press the panel YES key).
(4)(3)(5)
(6)
(7)
(4)Select the copy-source track number.
Click the popup button of the Source cell, and choose track “1” in the Source Track dialog box. You can also click the cell to select this.
(5)Select the copy-destination track number.
Click the popup button of the Destination cell, and choose track “2” in the Destination Track dialog box. You can also click the cell to select this.
If you specified two or more tracks as the “Source,” you must specify the same number of tracks in “Destination.”
(6)Select the
(7)Execute the editing operation.
Click the Exec. button. Then in the CopyWholeTrk dia- log box, click the Yes button (or press the panel YES key) to execute the operation.
When the operation is finished, the display will indicate “Completed.” Click the OK button (or press the panel YES key).
(8)In the TRACK,
(9)Check the results of the editing operation.
Play back from the beginning of the song to verify that the copy was performed correctly.
If you are not satisfied with the results, you can use Undo to return to the previous state. (→p.141)
75