Korg D3200 owner manual 2c. FADER/PAN/AUTOMATION, 103, 2c-1. Fader Pan, 2c-2. Automation

2c. FADER/PAN/AUTOMATION

2c-1. Fader Pan

1

2		3
1			4
2
1. Channel pan	[L63...C...R63]

This shows the pan setting for each channel. The value is shown below the icon.

Use the 1–16 key or 17–32 key to switch between channel groups, and use the Knob Matrix to set the pan for each group of sixteen channels.

2. Channel fader[–∞…+6]

This shows the fader setting for each channel. The value is shown below the icon.

Use the 1–16 key or 17–32 key to switch between channel groups, and use the sixteen faders to set the value.

3.Level meter

This indicates the master L/R output level.

4. Master fader [–∞...+0]

This indicates the MASTER fader setting. The numerical value is shown below the icon.

2c-2. Automation

You can turn automation on and record the realtime changes you make to the mixer settings while the song plays or records.

The recorded automation can then automatically change the mixer settings during playback or recording.

1		4
				5
	6
2			7
					8
3

1. Record channel buttons[, s]

Use these buttons to select the channels for which you want to record automation. Events will be recorded for each channel whose button you click to make it indicate (Rec) .

2. Record parameter buttons

[Fader, Pan, CH ON, Send, Expression]

Use these buttons to select the parameter for which you want to record automation. You can select only one parameter at a time; click a radio button to highlight the desired parameter.

If you’ve selected Send, the parameter that is selected in the Send cell (EFF1, EFF2, AUX1, AUX2) when you begin recording will be recorded as automation. However, “6. SnapShot” will record all Send parameters.

If you select Expression, click the button located at the side to select (Rec) before you start recording.

3. Master Fader [ , s]

If you selected “Fader” as the record parameter, and you want to record the operations of the MASTER fader as well, click this button to make it indicate “” (Rec).

4.Automation

This button turns automation playback/recording on/off. OFF: Automation playback/recording will not occur. On (Play): Executes automation playback. The Automa- tion indicator will light.

During song playback or recording, when the song reaches the location at which an event is recorded, that setting will be recalled, automatically changing the set- tings of the mixer. New automation events will not be recorded.

ON (Rec): Executes automation playback and event recording. The Automation indicator will light. During song playback or recording, when the song reaches the location at which an event is recorded, that setting will be recalled, automatically changing the set- tings of the mixer. In addition, new events will be recorded for channels whose record channel button is set to (Rec), according to the settings of the Event Rec Mode dialog box. When the recorder stops, this setting will automatically change to ON (Play).

If automation is on and you have not stored any scenes, the Default Scene will automatically be selected. If you want to edit scene-related parameters, be sure to store the scene.

Counter	Rename
METER
MIXER
CH	VIEW
EFFECT
SEND
EQ
PAN
SONG
SYSTEM	/MIDI
TRACK
CD

Reference
	UNDO
	TUNER
	SESSION	DRUMS
	STORE	SCENE
	MARK
	SCRUB
	1/IN ...	4/END
	LOC	LOC
	REC/PLAY	MODE
	Transport	keys

103