Korg D3200 owner manual RW drive, Printing conventions in this Manual

Cautions when using the CD-R/

RW drive

•During CD reading and writing operations, keep the unit in a horizontal position.

•Do not use the unit in extremely cold or hot locations.

•Do not use the unit in extremely humid locations.

•Do not use the unit in dusty or smoky locations.

•Do not subject the unit to vibration or strong physical shock. In particular, this unit is vulnerable to shock during CD reading and writing operations.

•Normally, you will be able to open the CD tray by press- ing the eject button. However if this fails, you can forcibly eject the tray by inserting a thin object (such as a straight- ened paper clip) into the emergency eject hole.

•Do not store the unit in hot or humid locations.

•Never touch the focusing lens.

•Do not use commercially available lens cleaners.

•Do not transport the unit with a disc left in the tray.

•Do not leave the unit with the disc tray open.

CD-R/RW handling

Please observe the following points when handling discs. Failure to observe these points may cause problems such as data not being written correctly, loss of recorded data, or drive malfunction.

•Do not leave discs in direct sunlight, or in locations of high temperature or high humidity.

•Do not touch the surface of a disc. Hold a disc by its edges.

•Remove dust or dirt from the surface of a disc. To remove dust, use an air duster or cleaner.

•Do not affix labels to a disc, or write on a disc in locations other than specified.

•Do not use chemicals or detergent to wipe a disc.

•Do not bend or drop a disc.

Responsibility for loss of data

Korg Corporation will accept no responsibility for any dam- ages (direct or indirect, whether sustained by the customer or by a third party) resulting from loss of or damage to data written on a CD-R or CD-RW disc.

Printing conventions in this

manual

Faders, knobs, and keys on the panel

In this manual, “faders,” “knobs,” and “keys” refer to controls on the panel. The names shown on the panel are printed in boldface in the manual.

Examples: MASTER fader, TRIM knob, REC/PLAY key

Items in the LCD screen

“Buttons” and “dialog boxes” are displayed in the LCD screen. The names shown in the screen are printed in boldface in the manual.

Items printed in “boldface” are parameters or tab page names shown in the LCD screen.

Examples: OK button, Rename dialog box, “SetUp” tab page

Other items printed in boldface

Boldface is also used to indicate the names of non- selectable parameters shown in the LCD screen, or to indicate content in the text that we wish to emphasize.

Steps (1) (2) (3) ...

Steps in a procedure are indicated as (1) (2) (3) ...

(→p.■■)

This indicates a reference page within this manual.

, ,

These symbols respectively indicate points of caution, notes of advice, or examples.

…, “XX” tab page

This refers to a page shown in the LCD screen. To access this page, press the top panel … key, and then click the “XX” tab in the LCD screen (→p.13).

You can also use the panel √TAB PAGE/TAB PAGE® keys to move between tab pages.

…, …, “XX” tab page

The top panel MIXER key and CD key display a page jump menu in the LCD screen before the tab pages appear, so click the page button (→p.13) and then click the “XX” tab (→p.13). Pressing the MIXER key or CD key will take you back to the page jump menu screen.

LCD screens

The parameter values shown in the LCD screens printed in this manual are explanatory examples, and may not necessarily match the displays that appear on your D3200.

iv