5. Automation

Automation is a function that automatically modifies mixer settings as the song location changes during playback. There are two types of automation; scene automation and event automation.

When automation is on, you can use the SCENE “Mixer View” tab page to view fade-in and fade-out operations and scene changes in which fader values change.

5-1. Scene automation

This type of automation automatically switches mixer set- tings when the song location during playback or recording arrives at the registered location for that scene.

When you register a scene, the location is also registered along with the other settings. When the current location of the song matches the registered location of the scene, the Scene Automation function will automatically select this scene, causing the mixer settings to change to the settings of the scene.

You can also re-register a scene at a different location, or edit the mixer settings of the scene and overwrite it onto the same scene memory.

Using scene automation

Scenes can be set to change automatically, when playback reaches the location where the scene was stored.

Store the scene at the location where you want the mixer settings to change (p.50 “4-1. Storing a scene”).

(1)Access the SCENE, “EditScene” tab page, and turn Automation “ON.”

The automation indicator will light.

(2)Play back the song.

Move to the location where you want the playback to start, and press the PLAY key.

When playback reaches the location at which the scene was stored, that scene will be recalled.

Storing a scene at a different location

You can recall a stored scene and store it again at a different location.

(1)Recall the scene that contains the mixer settings you want to store again at a different location.

For the procedure, refer to “4-2. Recalling a scene” (p.50).

(2)Move to the location at which you want to store the scene (p.38).

(3)Store the scene.

For details, refer to “4-1. Storing a scene.”

Editing the location of a stored scene

You can edit the location of a stored scene to change when it will become active during playback.

(1)Access the SCENE, “EditScene” tab page, and select (highlight) the desired scene.

(2)Click the EditLoc button to display the Edit Scene Location dialog box.

(3)Edit the location, and click the Yes button (or press the panel YES key) to finalize the change.

If you click the No button (or press the panel NO key), you will return to the “EditScene” tab page without making any change.

You can also change the location in the “EventList” tab page.

5-2. Event automation

This type of automation records mixer operation events such as fader movements or pan motion during playback, and re- produces these operations at the corresponding time during playback or recording.

You can also selectively re-record the recorded events, or copy them to another location or a different channel.

You can keep recording events until the Events Remaining indication reaches 0%.

The following operations can be recorded as events.

Fader operations of each channel

MASTER fader operations

Channel On operations of each channel

Pan operations of each channel

AUX send operations of each channel

Effect send operations of each channel

Expression pedal operations

You can use the Undo function to restore recorded or edited automation events to their state prior to recording or editing.

If a scene is stored within the region where you want to record events, we recommend that you use the SCENE, “SceneFilter” tab page (p.106) to disable the settings of that scene for the pa- rameter(s) you intend to record, so that those parameters will be affected only by the event automation.

Recording mixer operations

There are two ways to record event automation.

You can overwrite all events from the point where you start song playback/recording until the point where you stop (Over Write). Alternatively, you can record only the opera- tions that occur between two specified locations, or only for the region in which you actually operated the faders (Punch Write). (p.104)

As an example, here’s how to use “Over Write” to record events while the song plays back.

(1)Select the song that you want to use to record mixer operations.

(2)Move to the location at which you want to start record- ing automation, and store the mixer settings as a scene. Automation recording will start from the location of the scene you store here, and this scene will be the mixer set- tings at the beginning of the recording.

If you want to use an existing scene, recall that scene, move to the location at which you want to begin recording automation, and store the scene again.

(3)Access the Scene, “Automation” tab page, and select the channels for which you want to record mixer opera- tions.

If you want to record events for a channel, click its but- ton to make it indicate “”.

(4)Use the Pan, CH ON, Send, Fader, and Expression radio buttons to select the type of event you want to record.

You can record only one type of event at a time.

If you select Send, events will be recorded for the Send key (INTERNAL 1/2, AUX 1/2) selected by the cell beside the button.

52

Page 62
Image 62
Korg D3200 owner manual Automation, Scene automation, Event automation