Korg D3200 owner manual Rear panel

47 Value dial

Use this dial to edit the value of the selected parameter or to change the current time location. When the Scrub page is displayed, rotating this dial will play back the track at the corresponding speed (up to a maximum of double speed).

Rear panel

1 2 3 4 5 6 7 8 9

Introduction
	using the D3200	the first time
	Before	for

1AC connector

Connect the power supply cable (included) here.

2Main power switch (POWER ON)

This turns the main power on/off.

When the Main power switch is turned on, the D3200 will be in the standby mode. In the standby mode, pressing the ON key will turn the D3200 on. While the D3200 is operating, hold the ON key to access the Power Off dialog box and select Yes to shutdown the D3200 and return to the standby mode. Then you can use the main power switch to turn the power off completely.

To turn off the power, you must first press the ON key to perform the shutdown operation. Never turn off the Main power switch or disconnect the power cable until shutdown has been completed.

If you turn off the Main power switch or disconnect the power cable before shutdown has been completed, data and user settings may be lost, and the hard disk may be damaged.

3FOOT SW jack

When your hands are busy playing an instrument, you can use a foot switch to control basic oper- ations of the D3200 recorder.

A foot switch can be used to start/stop the playback, start/end manual punch-in recording, regis- ter a mark, or to record tap tempo. (→p.26, 63, 66, 119)

Connect a foot switch (optional PS-1) to this jack.

4EXPRESSION PEDAL jack

You can use a pedal to control a specified parameter of an insert effect. You can control the param- eter in real time while you play or record. (→p.57, 119)

Connect an expression pedal (separately sold option, EXP-2, XVP-10 etc.) to this jack.

5MIDI OUT connector

MIDI messages are transmitted from this connector. Use this when you wish to use the D3200 to control an external device via MIDI. (→p.94, 119)

6MIDI IN connector

MIDI messages are received at this connector. Use this when you wish to control the D3200 from an external MIDI device. (→p.94, 119)

7S/P DIF OUT jack

This is an optical-type S/P DIF format (IEC60958, EIAJ CP-1201) digital output jack (stereo). Use an optical cable to connect this jack to the optical digital input of your DAT, MD or other equipment.

This output provides the same audio as the MASTER L/R jacks, but as a digital signal at the same sampling frequency and bit depth as the current song.

Basic operation Items and functions in the Parts and their function Main features LCD screen

11