Korg D3200 owner manual Connect your audio sources to the mixer inputs, Confirm the changes

The highlighted area will then move one step toward the right. Repeat this step to edit the song name.

If you want to edit only a portion of the song name, click the buttons to move the highlighted area, and then click a character or numeral button.

Use the buttons in the LCD screen to perform the following operations.

“0...9”: Input a numeral (e.g., “0”)

“A...@_...”: Input an alphabetical character (e.g., “A”) or symbol (e.g., @, _).

: Input a space.

: Switch the alphabet buttons between lower case and upper case.

: Insert a space, and move the subsequent characters backward.

: Delete the character at the cursor location. : Erase the entire name.

(4)Confirm the changes.

When you have finished naming your song, click the OK button in the LCD screen (or press the panel YES key).

If you decide to discard the change you made, click the Cancel button in the LCD screen (or press the panel NO key).

3. Connect your audio sources to the mixer inputs
The mixer can accept twelve channels of analog in-
puts, two channels (one stereo pair) of digital (S/P	Mic	(3)		Keyboard
DIF) input (→p.44 “1-2. Digital input”), and a stereo	(2)	OUTPUT
input from the internal Session Drums (→p.59 “Re-
cording patterns on a track”). Here we'll explain
how to connect analog audio sources to channels 1-4.
Connect mics and instruments to the INPUT jacks	Guitar
Microphones, guitars & basses, and keyboard/syn-
thesizer instruments all have different output levels	(1)
and require different input connections. Here, we’ll
give an example of each type.
(1) Connect a guitar to the guitar input.
Rotate the INPUT 1 TRIM knob all the way to the	Connection example
left, and connect your guitar to the GUITAR IN jack.
The GUITAR IN jack is shared with INPUT 1, and	Guitar	Mic		Keyboard
the two cannot be used simultaneously. (→p.7 “3
GUITAR IN jack”)
(2) Connect a microphone to one of the analog inputs.		L	R

Quick Start

OverdubbingStep 2: Quick recordingStep 1: Preparations

Rotate the INPUT 2 TRIM knob all the way to the left, and connect a mic to one of the INPUT 2 jacks. Microphones will generally connect to the XLR inputs, although some will have plugs that can con- nect to the TRS balanced phone jacks. Additionally, some microphones require phantom power from the mixer. Each of the D3200’s XLR inputs are equipped with switchable phantom power supplies. Be sure and choose the right connection for your micro- phone. And never connect or disconnect a micro- phone while the phantom power is on.

S/P DIF L, R

	INPUT2		INPUT4			INPUT12
INPUT1		INPUT3		INPUT5	INPUT11

CH1 CH2 CH3 CH4 CH32

Mixdown andStep 3:

(3) Connect the stereo outputs from a keyboard to a			Recorder
	1Tr	2Tr	3Tr	4Tr	32Tr
pair of TRS phone jack inputs.

Rotate the INPUT 3 and 4 TRIM knobs all the way to the left, and connect the outputs of your keyboard to the INPUT 3 and 4 phone jacks.

Step 4: mastering

21