Korg D3200 owner manual 105, 2c-4. Edit Scene

4b. Parameter/Parameter value [MIDI value]/Location

Click the parameter or location (highlight) that you want to edit, and use the value dial (or +/– keys) to edit it.

The only way to edit a scene is to change its location. The values will not be updated until you click the OK button (or press the panel YES key) to confirm your edits.

5.Cut

Click this button to open the Cut Event dialog box. The selected event will be cut (deleted) from the event list. However, the event itself will be temporarily saved in the edit buffer (clipboard).

To execute the cut, click the Yes button (or press the panel YES key). To cancel, click the No button (or press the panel NO key).

To cut all events in the event list, click (highlight) the Select All button and then execute Cut.

6.Copy

Click this button to open the Copy Event dialog box. The selected event will be copied temporarily to the edit buffer (clipboard).

To execute the copy, click the Yes button (or press the panel YES key). To cancel, click the No button (or press the panel NO key).

To copy all events in the event list, click (highlight) the Select All button and then execute Copy.

7.Paste

Click this button to open the Paste Event dialog box. The event temporarily saved in the edit buffer (clipboard) will be pasted at the selected event.

To execute the paste, click the Yes button (or press the panel YES key). To cancel, click the No button (or press the panel NO key).

If the event at the paste-destination is the same type as the event that was Cut or Copied, it will be overwritten. If the event at the paste-destination is a different type, the pasted event will be added at that location.

If you paste multiple events (Select All), they will overwrite the existing data starting at the paste-destination you selected. However, only the types of event included in these multiple events will be overwritten.

8.Undo

Click this button to return to the state prior to executing Cut, Copy, or Paste. This can be used only to return to the immediately previous state. If the button indicates Redo, you can use it to cancel the Undo.

The data is held in common with the “7. Undo” data of “2c-2. Automation.” If you click the Automation Undo button immediately after event-editing, the last event-edit will be undone – not the automation recording.

9.Select List

Click this button to open the Select List dialog box. Here you can select the channel and parameter that will be dis- played in the event list. You can select one (and only one) of channels 1–32, Master Fader, or Expression.

2c-4. Edit Scene

The mixer settings you adjust can be stored as a “scene” at a desired location, and automatically recalled during playback to change the mixer settings (when the “2c-2. Automation” setting “Automation” is on). You can also recall a scene when desired as a set of general-purpose settings (→p.50). You can store one hundred scenes for each song.

A scene may contain the following settings.

Channel parameters

CH ON, PlayEQ, ATT, sends, insert effect assignments, fader, pan

Effects

Effect program numbers and Trim of the insert, master, and final effects.

Effect return, MASTER fader, AUX levels, master EQ

1	4
2
				5
					6
			7
3		8

1.Scene select cell

This area displays the currently selected scene (current scene).

If no scene is selected, the Default Scene will be selected. Choose a scene in the scene list and click the Recall but- ton to select it.

From the left, this shows the edit icon, location, scene name, and MIDI program number.

The edit icon will appear if the scene has been edited until you click the OverWrite button.

If you turn off the power before clicking the OverWrite button, the edits you made will be lost, and the scene will revert to the state prior to editing.

2.Scene list

This area displays the scenes that have been stored.

From the left, the location, scene name, overlap warning icon “ ”, and MIDI program number will be displayed for each scene. It is possible for there to be more than one scene at the same location, but an overlap warning icon reminds you to use caution when recalling these scenes.

If Automation is on, scenes that have this overlap warning icon will not play back.

3.Disable Prm

Click this button to display the Disable Param dialog box.

Counter	Rename
METER
MIXER
CH	VIEW
EFFECT
SEND
EQ
PAN
SONG
SYSTEM	/MIDI
TRACK
CD

Reference
	UNDO
	TUNER
	SESSION	DRUMS
	STORE	SCENE
	MARK
	SCRUB
	1/IN ...	4/END
	LOC	LOC
	REC/PLAY	MODE
	Transport	keys

105