98
Reference

Counter display

Click the counter button, and select the desired counter dis-
play method in the Time Disp Type dialog box.
1. Song display
Displays the song drive name, song name, sampling fre-
quency, and bit depth.
2. Information display
Displays date, remaining recordable time, scene, mark,
and tempo map data.
If the information display radio buttons in the Time Disp
Type dialog box are set to Date Time, and you have not
set the calendar, the indication is grayed-out to indicate
that it is not valid.
3. Counter button
Click this to display the Time Disp Type dialog box.
4. Counter display
Displays the current recorder location and measure.
Time Disp Type dialog box
1. Location radio buttons
These select the format and type of units used in the
counter display.
Time display ____:____:___.___ (HMSm)
The current location is shown as absolute time from
the beginning of the song. From the left, this shows
Hours: Minutes: Seconds. milliseconds (1/1000 sec-
onds).
* Maximum value is 23:59:59.999
Frame display ___:___.___.__F (HMSF)
The current location is shown as absolute time and
frames from the beginning of the song. From the left,
this shows Hours: Minutes: Seconds. Frames (the
“Frame Rate” setting of p.125).
*Maximum value is 23:59:59.29F (when using 30
frames/second)
Measure display __:__.__ (MBT)
The current location is shown as the number of meas-
ures from the beginning of the song. From the left, this
shows Measures:Beats.Ticks (1/96th beat)
*Maximum value is 99999:03.095 (for a 4/4 time sig-
nature)
2. Information display radio buttons
These select the information that will be shown in the
information display.
Date Time:
Calendar display, showing the current year/month/
date and time (hours and minutes).
This will be grayed-out if you have not set the date
and time.
Free Time:
Displays the amount of recording time available on
the currently selected drive. From the left, this indi-
cates hours, minutes, and seconds.
Scene:
Displays the currently-used scene name and scene
location.
Mark:
Displays the currently-used mark name and mark
location.
PatternMap:
This indicates the drum pattern that is currently being
used.
3. Date/Time
Here you can specify the date and time for the D3200’s
internal clock. Songs are managed according to the date
and time you specify here.
The Calendar dialog box will appear when you click this
button. To apply the new date and time, click the Yes but-
ton. If you decide not to change the date and time, click
the No button. (Alternatively, you can press the panel
YES key or NO key.)
3a. Date
This displays (and lets you set) the current date, dis-
played as Month:Date:Year (four digits).
3b. Time
This displays (and lets you set) the current time, dis-
played in 24-hour time as Hours:Minutes:Seconds.
The date and time are retained when you power-off to the
Standby mode. However, when you turn off the main power
switch, you’ll have to reset them.

Counter

4
23
1
4
3
Song page
Meter page
All Channel View
1
2
3
3a
3b