Korg D3200 Editing the effects, Editing the effect parameters, Storing an effect program

4. Editing the effects

You can edit the effect programs used by the insert effects, master effects, and final effect quickly and easily using the Knob Matrix.

Editing the effect parameters

(2)(3)

(4)

(6)

(5)

(1) (8)

For an insert effect

(1)Access the EFFECT, “InsertEFF” tab page.

(2)Select the insert effect (InsEFF1–8) that you want to edit.

Click the insert effect cell (highlighted), and use the value dial (or the +/– keys) to select an insert effect 1–8.

(3)The effect program assigned to the selected insert effect will appear. Below it, icons will show the algo- rithm used by that program.

To select a different program, click the popup button and make your selection.

(4)If the algorithm contains more than one effect icon, click the cell below the icon you want to edit (it will become highlighted), and a list of the parameters for that effect will be displayed.

If the program consists of only one effect, the displayed parameters are all that exist.

(5)Listen to the effect settings.

When you turn the ON/OFF button OFF, the effect will be bypassed, and the effect icon(s) will be grayed-out. When you turn the button ON, the effect will be applied. This way, you can listen to the difference that the effect makes and listen to the original sound as a reference.

(6)Use the Knob Matrix located below the LCD screen to edit the parameter values.

•To edit the value of a parameter, turn the knob in the Knob Matrix in the location corresponding to that knob icon.

(7)If the program consists of two or more effects, select the icon of the effect that you want to edit, and edit its parameters in the same way.

(8)Assign a name to the effect program that you edited.

•Click the Rename button to access the Rename dialog box. (→p.36 “1-2. Renaming a song”)

•After you have assigned the desired name, click the OK button (or press the panel YES key).

For a master effect or final effect

(1)Access the EFFECT, “MstrEFF1” (or “MstrEFF2”)/ “FinalEFF” tab page.

(2)Perform steps (3) and following of “For an insert effect,” above.

Storing an effect program

•If the song is playing, press the STOP key.

•Click the Store button in the effect tab page to display the Store Program dialog box.

•Click the Area list button and select either User or Song from the list.

U (User): User effect program. You can store 128 effect programs which are shared by all songs.

S (Song): Song effect program. You can store 32 effect pro- grams specific to each song.

•Click the number cell to specify the store-destination (it will be highlighted), use the value dial (or the +/– keys) to select the number, and then click the Yes button (or press the panel YES key) to store the effect program.

When you store the effect program, it will overwrite and replace any data that had been stored in that number.

56