Powermate P-WFT-16022 specifications Engine Preparation, Engine Oil, Ambient Service Temperature

Page 8

Engine Preparation

• Save all instructions

A Engine Oil

CAUTION

•Engine shipped without oil. Failure to add oil will result in serious engine damage.

A bottle of SAE 30 engine oil is included with your Trimmer. Refer to Figure 3 for alternative oil types to

use at different temperatures. Always use a high quality detergent oil classified “For Service, SG, SH, SJ” or higher. Do not use special additives.

CAUTION

Always use recommended oil type. Using dirty oil or incor- rect oil type such as 2-stroke engine oil will shorten engine life.

NOTE: Engine Oil Capacity is 17 oz. (503 ml). For first time fill, simply add the entire contents of the provided oil bottle to the crankcase.

How to Check Oil Level and Fill TO Proper Level

WARNING

Before checking oil, make sure engine is off, and spark plug wire has been disconnected from spark plug.

1.Place trimmer on a level surface.

2.Remove Dipstick and wipe clean with cloth. Refer to Figure 5 for location of Dipstick.

3.Replace Dipstick and do NOT screw it. Remove and check oil level.

4.When oil level is full, the oil will be at upper limit on dip stick. If oil level is near or below the lower limit, oil must be added. (See figure 4)

5.Add oil slowly until the oil level reaches the upper limit of the dipstick. Use a funnel or nozzle to reduce spillage.

CAUTION

Frequently check oil level while filling. DO NOT OVER- FILL. DO NOT UNDERFILL. Running engine at improper oil level will seriously damage engine.

6.Replace and tighten dipstick.

7.Clean up any spilled oil.

SAE

SAE 10W-30

 

 

 

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEMP -20

0

20

40

60

80

 

100° F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30

 

-20

-10

0

10

20

30 40° C

 

 

 

 

Ambient Service Temperature

 

 

 

 

 

 

 

 

 

 

 

Figure 3

 

 

 

 

 

 

 

 

Upper Limit

Lower Limit

Figure 4

Questions? Call Toll Free at 1-800-737-2112

7

Copyright © 2009 MAT Engine Technologies, LLC

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Field Trimmer Operator’s ManualSafety Definitions Safety Alert SymbolsSafety Warning Symbols Control and Operating SymbolsImportant Safety Information Save all instructionsFuel Safety Storage Safety Save all instructions Unit Engine SpecificationsFeatures Assembly How to Assemble the HandleHow to Check Oil Level and Fill to Proper Level Ambient Service TemperatureEngine Preparation Engine OilHow to Fill Engine with Fuel FuelHow to Start the Engine OperationHow to Stop the Engine How to Engage the Trimmer HeadHow to Disengage the Trimmer Head Operation Save all instructionsHow to Adjust the Height of Cut Trimming TipsSlope Guide Service MaintenanceService Records How to Change the Oil How to Clean the Air FilterHow to Replace the Trimmer Lines How to Check the Spark Plug How to Replace the Drive Belt Metl Corporate Office Correspondence only Technical ServiceHow to Prepare for Storage Troubleshooting Problem Possible Causes SolutionsWarranty Powermate Field Trimmer Limited WarrantyManufacturer’s Warranty Coverage Emisson Control System WarrantyYour Warranty Rights and Obligations Warranty How to Obtain Warranty ServiceExclusions Limitations of LiabilitySystems Covered by this Warranty Parts Description Manual del usuario Llame sin costo alSímbolos de control y funcionamiento Símbolos de alerta para sequradadSímbolos de advertencia para seguridad Instrucciones de seguridad importantes Conserve todas las instruccionesInstrucciones de seguridad importantes la siguiente Seguridad DE Niños Especificaciones CaracterísticasConserve todas las instrucciones Unidad Cubierta del arrancador de retroceso Cubre el meMontaje Cómo montar el asideroPreparción del motor Aceite de motorPreparción del motor la siguiente CombustibleCómo arrancar el motor UsoAntes de arrancar el motor Uso la siguiente Conserve todas las instrucciones Cómo parar el motorCómo engranar el cabezal de la segadora Cómo desengranar el cabezal de la segadoraUso la siguiente Guía Para Pendientes Mantenimiento Notas Importantes sobre el programa de mantenimientoCómo limpiar filtro de aire Mantenimiento la siguienteCómo cambiar el aceite Cómo cambiar los hilos de la segadora Cómo revisar la bujía Modelo de bujía Torch F6RTCCómo cambiar la banda del impulsor Wildlife Way Long Grove, IL Servicio técnicoCómo preparala para almacenamiento Diagnóstico y resolución de problemas Conserve todas las instrucciones ProblemaGarantía Garantía limitada de la Segadora Souhland Para Campo AbiertoGarantía la siguiente Conserve todas las instrucciones Garantía del sistema pro control de emisiones contaminantesDerechos y obligaciones al amparo de la garantía Cobertura de la garantía del fabricanteCobertura de la garantía Cómo obtener servicio de garantíaExclusiones Limitación de responsabilidadGarantía la siguiente Powermate Field Trimmer California Air Resource BoardPara Cambiar EL Filtro DE Aire

P-WFT-16022 specifications

The Powermate P-WFT-16022 is a versatile and robust workbench tool designed to elevate the efficiency and convenience of various tasks around the workshop or home. This powerful workbench offers an array of features that cater to both professionals and DIY enthusiasts, making it an essential addition to any workspace.

One of the standout features of the Powermate P-WFT-16022 is its durable construction. Made from high-quality materials, the workbench is designed to withstand heavy use and resist wear and tear over time. The surface is engineered to be scratch-resistant, ensuring that it maintains its appearance and functionality even after extensive handling.

In terms of dimensions, the Powermate P-WFT-16022 provides a generous workspace, allowing users to work on multiple projects simultaneously. Its ample surface area is designed to accommodate a variety of tools and materials, making it ideal for woodworking, metalworking, and other crafting activities. The sturdy legs offer stability and support, ensuring that the workbench remains firmly in place during operation.

One of the technological highlights of the Powermate P-WFT-16022 is its integrated power strip. This feature comes equipped with multiple outlets, allowing users to plug in various tools and appliances without the need for additional extension cords. This not only enhances convenience but also ensures that everything needed for a project is within easy reach.

The P-WFT-16022 also incorporates adjustable height settings, making it customizable to suit the user's preferences or specific tasks. This ergonomic feature can help reduce strain and fatigue during prolonged use, contributing to a more comfortable working environment.

Another noteworthy characteristic of this workbench tool is its portability. The built-in wheels allow users to move the workbench effortlessly from one location to another. This ease of mobility makes it suitable for both workshop settings and on-site jobs, providing flexibility for various tasks.

Overall, the Powermate P-WFT-16022 is an exemplary workbench tool that combines sturdiness, functionality, and advanced features. Its practical design caters to a wide range of applications, ensuring users can tackle projects with confidence and efficiency. Whether for professional use or personal projects, this workbench is a reliable companion that meets the demands of any crafting or repair task.
Top Page Image Contents