Powermate P-WFT-16022 specifications Fuel Safety

Page 4

Important Safety Information

Important Safety Information (Continued)

Save all instructions

Always wear ANSI compliant safety goggles or safety glasses with side shields when operating trimmer to protect your eyes from foreign objects, which can be thrown from the unit.

Wear appropriate clothing such as a long sleeved shirt or jacket. Also wear long trousers or slacks. Do NOT wear shorts. Do NOT wear loose clothing, which could get caught in this equipment.

Always wear work gloves and sturdy footwear such as leather work shoes or short boots. These will protect ankles and shins from small sticks, splinters, and other flying debris, and improve traction.

It is advisable to wear protective headgear to protect against being struck by small flying particles, or being struck by low hanging branches, twigs, or other objects, which may be unnoticed to the operator.

WARNING

Do not put hands or feet near or under rotating parts.

When crossing gravel drives, walks, or roads, stop the rotating trimmer head and wait for the trimmer lines to stop.

Exercise extreme caution. Stay alert for hidden hazards or traffic.

WARNING

Exercise caution to avoid slipping or falling. Never operate trimmer in wet grass. Always be sure of your footing; keep a firm hold on the handle and walk; never run.

Look behind and use care when backing.

Never operate the trimmer without good visibility or light.

DANGER

Do not run the engine indoors or inside a closed area. The exhaust fumes are dangerous, containing CARBON

MONOXIDE, an ODORLESS AND DEADLY GAS.

Never leave the trimmer unattended when the engine is running. Stop the engine and make sure all moving parts have stopped. Remove the wire from the spark plug.

If the trimmer should start to vibrate abnormally, stop the engine, disconnect the spark plug wire and prevent it from touching the spark plug. Check immediately for the cause. Vibration is generally a warning of trouble.

Watch for holes, ruts, bumps, or other rough ground. Tall grass can hide obstacles.

WARNING

Frequently clean debris and grass build up from the recoil starter cover holes, under the deck in the trimming

head area, and around the muffler. Using the unit with excessive debris can risk fire. Always use extreme caution when using the trimmer during dry conditions.

WARNING

Do not trim excessively steep slopes (maximum 15 degrees). See the “Slope Guide” in the back of this manual to check a slope.

Always trim across the face of slope; never up and down. Exercise extreme caution when changing direction on slopes. If you are uneasy on a slope, do NOT trim it.

Do NOT trim near drop-offs, ditches, or embankments. The operator could lose footing or balance.

FUEL SAFETY

WARNING

Gasoline is extremely flammable, and gasoline vapors can explode if ignited. Handle with Care.

Use an approved container.

Check fuel supply before each use, allowing space for expansion as the heat of the engine and/or sun can cause fuel to expand.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

WARNING

Do not smoke while refueling.

After refueling, replace fuel tank cap securely and wipe up spilled fuel.

Questions? Call Toll Free at 1-800-737-2112

3

Copyright © 2009 MAT Engine Technologies, LLC

Image 4
Contents Field Trimmer Operator’s ManualSafety Definitions Safety Alert SymbolsSafety Warning Symbols Control and Operating SymbolsImportant Safety Information Save all instructionsFuel Safety Storage Safety Features SpecificationsSave all instructions Unit Engine Assembly How to Assemble the HandleHow to Check Oil Level and Fill to Proper Level Ambient Service TemperatureEngine Preparation Engine OilHow to Fill Engine with Fuel FuelHow to Start the Engine OperationHow to Stop the Engine How to Engage the Trimmer HeadHow to Disengage the Trimmer Head Operation Save all instructionsHow to Adjust the Height of Cut Trimming TipsSlope Guide Service Records MaintenanceService How to Change the Oil How to Clean the Air FilterHow to Replace the Trimmer Lines How to Check the Spark Plug How to Replace the Drive Belt How to Prepare for Storage Technical ServiceMetl Corporate Office Correspondence only Troubleshooting Problem Possible Causes SolutionsWarranty Powermate Field Trimmer Limited WarrantyYour Warranty Rights and Obligations Emisson Control System WarrantyManufacturer’s Warranty Coverage Warranty How to Obtain Warranty ServiceExclusions Limitations of LiabilitySystems Covered by this Warranty Parts Description Manual del usuario Llame sin costo alSímbolos de advertencia para seguridad Símbolos de alerta para sequradadSímbolos de control y funcionamiento Instrucciones de seguridad importantes Conserve todas las instruccionesInstrucciones de seguridad importantes la siguiente Seguridad DE Niños Especificaciones CaracterísticasConserve todas las instrucciones Unidad Cubierta del arrancador de retroceso Cubre el meMontaje Cómo montar el asideroPreparción del motor Aceite de motorPreparción del motor la siguiente CombustibleAntes de arrancar el motor UsoCómo arrancar el motor Uso la siguiente Conserve todas las instrucciones Cómo parar el motorCómo engranar el cabezal de la segadora Cómo desengranar el cabezal de la segadoraUso la siguiente Guía Para Pendientes Mantenimiento Notas Importantes sobre el programa de mantenimientoCómo cambiar el aceite Mantenimiento la siguienteCómo limpiar filtro de aire Cómo cambiar los hilos de la segadora Cómo revisar la bujía Modelo de bujía Torch F6RTCCómo cambiar la banda del impulsor Cómo preparala para almacenamiento Servicio técnicoWildlife Way Long Grove, IL Diagnóstico y resolución de problemas Conserve todas las instrucciones ProblemaGarantía Garantía limitada de la Segadora Souhland Para Campo AbiertoGarantía la siguiente Conserve todas las instrucciones Garantía del sistema pro control de emisiones contaminantesDerechos y obligaciones al amparo de la garantía Cobertura de la garantía del fabricanteCobertura de la garantía Cómo obtener servicio de garantíaExclusiones Limitación de responsabilidadGarantía la siguiente Powermate Field Trimmer California Air Resource BoardPara Cambiar EL Filtro DE Aire

P-WFT-16022 specifications

The Powermate P-WFT-16022 is a versatile and robust workbench tool designed to elevate the efficiency and convenience of various tasks around the workshop or home. This powerful workbench offers an array of features that cater to both professionals and DIY enthusiasts, making it an essential addition to any workspace.

One of the standout features of the Powermate P-WFT-16022 is its durable construction. Made from high-quality materials, the workbench is designed to withstand heavy use and resist wear and tear over time. The surface is engineered to be scratch-resistant, ensuring that it maintains its appearance and functionality even after extensive handling.

In terms of dimensions, the Powermate P-WFT-16022 provides a generous workspace, allowing users to work on multiple projects simultaneously. Its ample surface area is designed to accommodate a variety of tools and materials, making it ideal for woodworking, metalworking, and other crafting activities. The sturdy legs offer stability and support, ensuring that the workbench remains firmly in place during operation.

One of the technological highlights of the Powermate P-WFT-16022 is its integrated power strip. This feature comes equipped with multiple outlets, allowing users to plug in various tools and appliances without the need for additional extension cords. This not only enhances convenience but also ensures that everything needed for a project is within easy reach.

The P-WFT-16022 also incorporates adjustable height settings, making it customizable to suit the user's preferences or specific tasks. This ergonomic feature can help reduce strain and fatigue during prolonged use, contributing to a more comfortable working environment.

Another noteworthy characteristic of this workbench tool is its portability. The built-in wheels allow users to move the workbench effortlessly from one location to another. This ease of mobility makes it suitable for both workshop settings and on-site jobs, providing flexibility for various tasks.

Overall, the Powermate P-WFT-16022 is an exemplary workbench tool that combines sturdiness, functionality, and advanced features. Its practical design caters to a wide range of applications, ensuring users can tackle projects with confidence and efficiency. Whether for professional use or personal projects, this workbench is a reliable companion that meets the demands of any crafting or repair task.