Poulan PD25PH48STB owner manual Service and Adjustments, To Remove Mower See Fig, To Install Mower

Page 20

SERVICE AND ADJUSTMENTS

WARNING:TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress brake pedal fully and set parking brake.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 19)

Place attachment clutch in “DISENGAGED” position.

If equipped, turn height adjustment knob to lowest setting.

Lower mower to its lowest position.

Disengage belt tension rod from lock bracket.

CAUTION: Rod is spring loaded. Have a tight grip on rod and release slowly.

Remove retainer spring holding anti-swaybar to chassis bracket and disengage anti-swaybar from bracket.

Remove four retainer springs from front plate assembly and remove plate.

Remove retainer springs from suspension arms at deck and disengage arms from deck.

Raise attachment lift to its highest position.

Slide mower forward and remove belt from electric clutch pulley.

Slide mower out from under right side of tractor.

TO INSTALL MOWER

Be sure tractor is on level surface and mower suspension arms are raised with attachment lift control. Engage park- ing brake.

Swing anti-sway bar to left side of mower deck.

Slide mower under tractor with deflector shield to right side of tractor.

IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.

If equipped, turn height adjustment knob counter- clockwise until it stops.

Lower mower linkage with attachment lift control.

Be sure belt tension rod is in disengaged position.

Install belt into electric clutch pulley groove.

Place the suspension arms on outward pointing deck pins. Retain with double loop retainer spring with loops up as shown.

Install front plate assembly to tractor suspension brackets and retain with single loop retainer springs as shown.

SUSPENSION ARMS

LOCK BRACKET

 

 

BELT TENSION ROD

 

 

 

(DISENGAGED POSITION)

 

FRONT

ELECTRIC CLUTCH PULLEY

 

 

 

 

 

MOWER

FRONT PLATE

 

 

BRACKET

 

 

ASSEMBLY

 

 

 

CHASSIS

 

 

SINGLE LOOP

BRACKET

 

 

 

 

RETAINER

 

 

 

 

 

 

SPRING

 

 

 

DOUBLE LOOP

 

 

 

RETAINER

 

 

 

SPRING

RETAINER

 

 

 

SPRING

 

 

FLANGED PIN

 

ANTI-SWAY

 

 

USE PLIERS FOR

BAR

 

DEFLECTOR

RETAINER SPRINGS

 

 

SHIELD

 

SUSPENSION ARMS

 

 

 

DOUBLE LOOP

 

 

 

RETAINER SPRINGS

 

 

LOOP UP

(Outward pointing

 

 

deck pins)

 

02565

 

 

 

 

 

FIG. 19

20

Image 20
Contents PD25PH48STB Safety Rules Safety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck See FigInstall Mower and Drive Belt See Figs To Attach Nose Roller See FigCheck Tire Pressure Check Mower LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See FigsBefore Starting the Engine Towing Carts and Other ATTACH- MentsCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsAutomatic Transmission Warm UP NingMaintenance Lubrication ChartGeneral Recommendations Before Each USETractor Engine Cleaning Clean AIR INTAKE/COOLING AreasMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Drive Belt To Replace Mower Blade SecondaryTo Replace Motion Drive Belt See Fig To Check and Adjust Brake See FigTransmission REMOVAL/REPLACEMENT To Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak Battery See FigReplacing Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Replace Headlight BulbInterlocks and Relays To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionWith attachment clutch Schematic Tractor Model Number PD25PH48STBElectrical KEY Part Description 188031Chassis and Enclosures 187495 186689Tractor Model Number PD25PH48STB Drive17060516 17000612Steering Assembly 188967 184704X428 Wheel Steering 184706 Axle72110618 Spark Arrester EngineOptional Equipment KEY Part NO. NO. Description Seat Seat Assembly1712 Decals Wheels & TiresMower Lift 124526X 178981125631X Mower Deck KEY Part Description Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

PD25PH48STB specifications

The Poulan PD25PH48STB is a versatile lawn tractor designed to deliver performance and comfort for homeowners looking to maintain their lawns with ease. It is particularly well-suited for those with medium to large yards, providing the necessary power and features to make lawn care more efficient.

One of the standout features of the Poulan PD25PH48STB is its robust 48-inch cutting deck, which allows for a wider cutting path. This is beneficial for covering more ground in less time, reducing the overall time spent mowing the lawn. The deck is designed with a durable steel construction that ensures longevity and resilience against various elements.

The mower is powered by a reliable 25 horsepower Briggs & Stratton engine. This engine combines power with fuel efficiency, offering excellent performance to tackle even the toughest grass conditions. The electric start feature adds convenience, allowing users to start the engine with the turn of a key rather than the traditional method of pulling a cord.

Another notable characteristic of the PD25PH48STB is its six-speed transmission, which provides excellent control and adaptability depending on the mowing conditions. This allows users to adjust their speed based on their preference or the terrain, whether it’s flat or hilly.

The tractor also features an ergonomic seat design, ensuring comfort during extended mowing sessions. The adjustable seat makes it easy to find the perfect riding position, while the easy-to-reach controls enhance the overall user experience. To further enhance comfort, the PD25PH48STB comes equipped with a deck wash port that simplifies cleaning, allowing users to maintain the mower with minimal effort.

For those concerned about safety, this lawn tractor includes an automatic safety shut-off feature that engages when the operator leaves the seat, providing peace of mind while mowing. Additionally, the tight turning radius allows for greater maneuverability, making it easier to navigate around trees, flower beds, and other obstacles in the yard.

Overall, the Poulan PD25PH48STB is an exceptional choice for homeowners looking for a dependable, efficient, and comfortable lawn mowing solution. With its powerful engine, generous cutting deck, user-friendly features, and safety mechanisms, it stands out as a top contender in the lawn tractor market.