Poulan 192362 manual Install Mulcher Plate, If previously removed

Page 9

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

4.Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment knob and flat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat

Seat Pan

 

Shoulder

466

Bolt

Flat Washer

02464

Adjustment Knob

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

WARNING: Before starting, read, un- derstand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

4.Place gear shift lever in neutral (N) position.

5.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

8.Slowly release clutch/brake pedal and slowly drive tractor off skid.

9.Apply brake to stop tractor, set park- ing brake and place gearshift lever in neutral position.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

INSTALL MULCHER PLATE

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of

mower deck.

CAUTION: Do not remove deflector shield from mower.

1. Press lift lever plunger and raise

attachment lift lever to its highest po-

sition.

02114

Deflector Shield

2.

Release parking brake by depressing

 

clutch/brake pedal.

3.

Place gearshift lever in neutral (N)

 

position.

4.

Roll tractor forward off skid.

5.

Remove banding holding deflector

 

shield up against tractor.

Mulcher Plate

Latch

Hooks

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model NO. CO18542STB Warranty Table of ContentsSafety Rules General OperationII. Slope Operation IV. Service III. ChildrenDo not Safety Rules Product Specifications Customer ResponsibilitiesAPI-SG-SL Unassembled Parts Tools Required for Assembly To Remove Tractor from CartonBefore Removing Tractor from Skid If previously removed Install Mulcher PlateReposition Right Rear Gauge Wheel To Convert to Bagging or DischargingCheck Tire Pressure Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower To Operate on HillsTo Transport To Start Engine Before Starting the EngineTowing Carts and Other ATTACH- Ments Check Engine OIL LevelMowing Tips Maintenance General RecommendationsBefore Each USE Tractor Engine Cleaning Service and AdjustmentsTo Level Mower Housing To Install MowerSIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentTo Check and Adjust Brake To Replace Mower Blade Drive BeltTo Replace Motion Drive Belt Transaxle Gear Shift Lever NEU- Tral Adjustment To Adjust Steering Wheel ALIGN- MentTo Start Engine with a Weak Battery Front Wheel TOE-IN/CAMBERTo Adjust Carburetor Other BatteryFuel System Engine OILProblem Cause Correction Troubleshooting ChartExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

192362 specifications

The Poulan 192362 is a versatile and durable outdoor power tool designed for homeowners and landscaping professionals alike. Known for its reliability and efficiency, this model stands out in the realm of chain saws, catering to a variety of cutting tasks, from trimming branches to felling trees.

One of the main features of the Poulan 192362 is its powerful engine, typically featuring a 42cc two-stroke engine that provides ample power for demanding jobs while ensuring the tool remains lightweight and manageable. This balance between power and weight makes it particularly appealing to users who require both performance and ease of use.

Equipped with a 16-inch bar and a low-profile chain, the Poulan 192362 facilitates smooth and efficient cutting. The length of the bar is ideal for handling a wide range of cutting applications, making it suitable for residential and light commercial use. The low-profile chain not only enhances cutting performance but also reduces kickback, improving safety during operation.

In terms of technology, the Poulan 192362 is designed with user comfort in mind. It features an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged use. Additionally, the tool incorporates anti-vibration technology, which further enhances user comfort by minimizing the vibrations transferred from the engine to the user’s hands.

Another notable characteristic of the Poulan 192362 is its easy-start technology. This system allows for quick and easy starting, even in colder conditions, significantly reducing the hassle often associated with starting two-stroke engines. Moreover, the inclusion of an adjustable automatic chain oiler ensures that the chain remains lubricated during operation, thereby extending its life and ensuring optimal performance.

Maintenance and safety are priorities for this model, as evidenced by features like the inertia-activated chain brake, which halts the chain in the event of sudden movements. This safety measure protects the operator from potential accidents, making the Poulan 192362 a smart choice for users concerned about safety during cutting tasks.

Overall, the Poulan 192362 combines power, efficiency, and safety, making it a reliable tool for any outdoor cutting needs. Its blend of features and user-friendly technologies make it an excellent choice for those seeking a robust chain saw that meets both professional and residential demands.
Top Page Image Contents