Rheem Rheem / Ruud standby generator, GEN20AD-E Equipment Description, Owner Responsibilities

Page 7

Installation

Equipment Description

This product is only for use as an optional generator system which provides an alternate source of electric power and to serve loads such as heating, refrigeration systems, and communication systems that, when stopped during any power outage, could cause discomfort or inconvenience.

NOTICE This product does NOT qualify for either an emergency standby or legally required standby system as defined by NFPA 70 (NEC).

 t &NFSHFODZHFOFSBUPSTZTUFNTBSFJOUFOEFEUP automatically supply illumination, power, or both, to designated areas and equipment in the event of failure of the normal supply. Emergency systems may also provide power for such functions as ventilation where essential to maintain life, where current interruption of the normal supply would produce serious life safety or health hazards.

 t -FHBMMZ3FRVJSFETUBOECZHFOFSBUPSTZTUFNTBSF intended to automatically supply power to selected loads in the event of failure of the normal source which could create hazards or hamper rescue or fire- fighting operations.

Every effort has been made to ensure that information in this manual is accurate and current. However, we reserve the right to change, alter, or otherwise improve the product and this document at any time without prior notice.

Only current licensed electrical and plumbing professionals should attempt home generator system installations. Installations must strictly comply with all applicable codes, industry standards, laws and regulations.

Owner Responsibilities

 t 3FBEBOEGPMMPXUIFJOTUSVDUJPOTHJWFOJOUIF operator’s manual.

 t 'PMMPXBSFHVMBSTDIFEVMFJONBJOUBJOJOHDBSJOHGPS and using your generator, as specified in the operator’s manual.

 t $BSCPONPOPYJEFEFUFDUPS T .645CFJOTUBMMFEBOE maintained indoors according to the manufacturer’s instructions/recommendations. Smoke alarms cannot detect carbon monoxide gas.

 t 4NPLFEFUFDUPS T .645CFJOTUBMMFEBOENBJOUBJOFE indoors according to the manufacturer’s instructions/ recommendations. Carbon monoxide alarms cannot detect smoke.

If you have questions about intended use, ask your installer or dealer or call 877-369-9400 between

8:00 AM and 5:00 PM CT.

Installing Dealer/Contractor Responsibilities

t 3FBEBOEPCTFSWFUIFTBGFUZSVMFT

t *OTUBMMPOMZBO6-BQQSPWFEUSBOTGFSTXJUDIUIBUJT compatible with the generator.

t 3FBEBOEGPMMPXUIFJOTUSVDUJPOTHJWFOJOUIJT installation and start-up manual.

t *OTUBMMBUJPONVTUTUSJDUMZDPNQMZXJUIBMMBQQMJDBCMF codes, industry standards, laws, and regulations.

t "MMPXTVGGJDJFOUSPPNPOBMMTJEFTPGUIFHFOFSBUPSGPS maintenance and servicing.

Cold Weather Kit

If operating the generator below 30°F (-1°C), it is HIGHLY RECOMMENDED that a Model 6231 Cold Weather Kit (includes oil warmers and battery warmer) be installed. These items are available at your local servicing dealer.

For cold weather areas (below 0°F (-18°C)) it is also recommended that a BCI, Size 75, wet lead-acid battery be used of 630 CCA minimum.

If you need more information on this matter, please call (877) 369-9400, between 8:00 AM and 5:00 PM CT.

30°F (-1°C)

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Generator Systems Date of Purchase Generator For Future ReferenceEngine Table of Contents Safety Symbols and Meanings Important Safety InstructionsFlammable and explosive, which could cause  Tie up long hair and remove jewelry Cold Weather Kit Installing Dealer/Contractor ResponsibilitiesEquipment Description Owner ResponsibilitiesShipment Contents Unpacking PrecautionsDelivery Inspection Unit Information Installation ChecklistInstalling Contractor Information Owner InformationIntentionally Left Blank Exhaust Side of the Generator Generator Placement t &OTVSFFYIBVTUHBTJTLFQUBXBZGSPN Windows C doors Other General Location Guidelines Requirements Placement of Standby Generator to Reduce the Risk of FireAnnex a Explanatory Material AAA Generator InstallationsElectrical and Fuel Inlet Locations Concrete Anchoring of Unit Lifting the GeneratorAccess Ports To remove front panel To remove battery panelTo secure battery panel To open roof t 8IFSFMPDBMDPOEJUJPOTJODMVEFFBSUIRVBLF Gaseous Fuel SystemLP Vapor Propane LP Vapor Natural Content of FuelPower Loss Fuel ConsumptionFuel Conversion System Connectors Generator AC Connection System Utility Circuit Connection Generator Power ConnectionTransfer Switch Communication Grounding the GeneratorGenerator Operation Control Buttons System Control PanelMenu MenuSET Time General Set Up ScreenControl Panel Prompts Automatic ModeGeneral System Parameters Prompts as outlined below Advanced Settings ScreenBattery Standard Cold Start Specifications Service Code Detection SystemFinal Installation Considerations BatteryInitial Start-up No Load Electronic Governing Check Electronic Governor SystemAutomatic Operation Sequence Setting Exercise TimerAntenna Installation # of flashes Service needed Wireless MonitorSystemSYSTEM UPDATEupdate Wireless Monitor OperationOther Installation InspectionWireless Monitor Status LED’s Standard OperationSchematic Diagram Schematic / Wiring DiagramsOn Some UNITS, Wire 1 MAY Also be Labeled AS Wire Wiring Diagram

GEN15ADC-E, GEN16AD-E, GEN20AD-E, Rheem / Ruud standby generator specifications

The Rheem GEN16AD-E, GEN20AD-E, and GEN15ADC-E models are part of Rheem and Ruud's innovative line of standby generators, designed to provide reliable power solutions for both residential and commercial applications. These generators deliver robust performance, ensuring uninterrupted power supply during outages and emergencies.

The GEN16AD-E and GEN20AD-E generators are particularly noteworthy for their advanced features and technologies. They are equipped with automatic voltage regulation, which helps maintain a steady power supply and protects your appliances from voltage fluctuations. These models also feature a state-of-the-art controller with an LCD display, allowing users to monitor generator performance and status easily. Moreover, they come with a durable, weather-resistant enclosure that is built to withstand various environmental conditions, ensuring longevity and reliability.

Both the GEN16AD-E and GEN20AD-E models incorporate cutting-edge noise reduction technologies, making them some of the quietest generators on the market. This is a significant advantage for residential areas, where noise levels must be kept to a minimum for the comfort of families and neighbors alike. Additionally, their compact design allows for easy installation in limited spaces, making them versatile for various property layouts.

The Rheem / Ruud standby generators are also designed with fuel efficiency in mind. With advanced engine designs and power management features, these units optimize fuel consumption, providing significant cost savings over time. Automatic start systems enhance convenience, enabling the generator to kick in as soon as an outage is detected. This ensures you are never left without power, no matter the circumstances.

The GEN15ADC-E model focuses on delivering a balance of power and efficiency for smaller applications, making it ideal for homeowners looking for lower-capacity solutions without compromising on performance. It also offers features such as digital control panels for easy monitoring and maintenance.

Overall, the Rheem GEN16AD-E, GEN20AD-E, and GEN15ADC-E standby generators exemplify reliability, efficiency, and user-friendly design. With their impressive features and modern technologies, these generators are a smart investment in power security, ensuring that your home or business stays operational even during unexpected power outages. Their strong reputation in the market reflects the commitment of Rheem and Ruud to provide high-quality products that meet the diverse needs of their customers.
Top Page Image Contents