Scag Power Equipment SCR manual Operating Instructions, Controls and Instrument Identification

Section 4

OPERATING INSTRUCTIONS

1. Ignition Switch (Figure 4-1). Used to start the

CAUTION: engine and has three positions; OFF, ON, and

START.

Do not attempt to operate this mower unless you have read this manual. Learn the location and purpose of all controls and instruments before you operate this mower.

4.1CONTROLS AND INSTRUMENT IDENTIFICATION

Before operating the mower, familiarize yourself with all mower and engine controls. Knowing the location, function and operation of these controls is important for safe and efficient operation of the mower.

2.Mower Deck Switch (Figure 4-1). Used to engage and disengage the mower drive system. Pulling up on the switch will engage the deck drive. Pushing down on the switch will disengage the deck drive.

3.Engine Choke Control (Figure 4-1).Used to start a cold engine.

4.Engine Throttle Control (Figure 4-1). Used to control the engine speed. Pushing the lever forward increases engine speed. Pulling the lever back decreases engine speed. Full back position is the IDLE position. Full forward is the cutting position.

Left Steering
Control
Cutter Deck	Right Steering
Lift Lock
	Control
Engine
Choke Control

Ammeter	Park Brake
	Control
Mower Deck
Switch	Forward Speed
Hour Meter
	Control
Engine
Throttle Control
Ignition Switch
Fuses	Right Fuel
	Gauge
Left Fuel
Gauge
	SCR 2K C&I

Figure 4-1 Controls and Instruments

8