Scag Power Equipment SCR manual Tracking Adjustment Steering Handle Adjustment, Drive linkage

Page 28

R

Section 6

Figure 6-5 Drive linkage

SCR 2K TAD

Tracking Adjustment

Steering Handle Adjustment

-IMPORTANT-

Before proceeding with this adjustment, be sure that the tire pressure is correct, that the caster wheels turn freely, and that the transmission drive belt tension spring is not broken.

The mower tracking should be adjusted if the machine does not travel in a straight line during forward travel. Preform the neutral adjustment before proceeding with the tracking adjustment.

1.If the machine pulls to the right, loosen the jam nuts on the right control rod and turn the rod slightly clockwise, tighten the jam nuts and retest.

2.If the machine pulls to the left, loosen the jam nuts on the left control rod and turn the rod slightly clockwise, tighten the jam nuts and retest.

The steering handles should be positioned in line with each other for easy one-handed control. The handles can then be adjusted forward or backwards to accommodate the operator.

Gap

Keep Handles

Aligned

Adjustment Bolt

SCR 2K SHA

Figure 6-6 Steering Handle Adjustment

24

Image 28

Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Table of Contents Table of Contents Contd General Information IntroductionDirection Reference Servicing the Engine and Drive Train ComponentsSignal Words Safety InformationBefore Operation Considerations Operation Considerations Maintenance Considerations Do not turn sharply. Use care when backing upSafety and Instructional Decals Install Belt Cover Before Operating MachineSpecifications EngineElectrical TractorWeights and Dimensions Tractor ContdCutter Deck Grass Catching SystemOperating Instructions Controls and Instrument IdentificationSafety Interlock System Blower Belt ReleaseStarting the Engine Ground Travel and SteeringForward Travel Reverse TravelEngaging the Deck Drive Cutter Blades Hillside OperationParking the Mower HOPPER, Mulch or Side Discharge OperationAfter Operation Grass Catching Operation 10 Tailgate OperationMulching Operation Side Discharge OperationRemoving Clogged Material Moving Mower with Engine Stopped Adjusting Cutting HeightRecommendations for Mowing Tilting the Cutter Deck Deck Locking Pin Locking Pin HoleTroubleshooting Cutting Conditions Condition Cause CureTroubleshooting Contd Condition Cause Cure Scalloped Cut, or Rough ContourTroubleshooting Contd GroundAdjustments Parking Brake AdjustmentNeutral Adjustment Travel AdjustmentsStart the engine and disengage the parking brake Tracking Adjustment Steering Handle Adjustment Drive linkageThrottle Control and Choke Adjustments Belt AdjustmentCutter Deck Adjustments Belt AlignmentMaintenance Maintenance Chart Recommended Service IntervalsMaintenance Chart Recommended Service Intervals Contd Lubrication Grease Fitting Lubrication Chart see FigureLubrication Fitting Points Checking Engine Crankcase Oil Level Checking Hydraulic Oil LevelChanging Hydraulic Oil Changing Engine Crankcase Oil Changing Engine Oil FilterEngine Fuel System Filling the Fuel TankBattery Checking Electrolyte Level and Cleaning BatteryEngine AIR Cleaner Cleaning and/or Replacing Air Cleaner ElementCharging the Battery Jump StartingBlade Replacement Drive BeltsCutter Blades Blade InspectionTires HopperCutter Deck Gearbox Checking Lubricant LevelPower Unit Gearbox 10 Gearbox Drain PlugBODY, DECK, Hopper and Upholstery 13 Fluid LevelPage Cutter Deck Part Number Description Cutter Deck Support Components Cutter Deck Support Components Sheet Metal Sheet Metal Blower Assembly Blower Assembly Engine and Attaching Parts Engine and Attaching Parts Traction Drive Components Part Description Hydraulic Pump Housing Kit Includes Housing, Journal Bearing Cutter Deck Drive Gearbox Ref. Part No. No. Description Speed and Steering Controls Part Description Parking Brake Mechanism Parking Brake Mechanism Fuel and Hydraulic Components Ref. Part No. Number Description Electrical System Part Number Description Hopper Hopper Hopper Actuator Mechanism Ref. Part No. Number Description Replacement Decals and Information Plates Rotating Blades and BeltsSCR 2K RD2 Electrical Schematic Page Limited Warranty Commercial Equipment 1999