ResMed VPAP Adapt SV manual Troubleshooting, Servicing Australia and New Zealand

Page 31

Applicable ResMed warranty details are provided with the device at the time of original supply. Of course, as with all electrical devices, if any irregularity becomes apparent, you should exercise caution and have the device inspected by an authorized ResMed service center.

If you feel the unit is not performing properly, see “Troubleshooting” on page 31.

Servicing (Australia and New Zealand)

This device is intended to provide safe and reliable operation when operated and maintained in accordance with the instructions provided by ResMed. To ensure that your device continues to provide optimum performance it is recommended that this product (VPAP Adapt SV) be inspected by an authorised ResMed Service Centre five years from the date of purchase.

CAUTION

! Inspection and repair should only be performed by an authorized service agent. Under no circumstances should you attempt to service or repair the unit yourself.

English

Troubleshooting

If there is a problem, try the following suggestions. If the problem cannot be solved, contact your equipment supplier or ResMed. Do not attempt to open the flow generator.

Problem

Possible cause

Solution

 

 

 

Insufficient air delivered

Air filter is dirty.

Replace air filter.

from flow generator

 

 

 

Air tubing is kinked or

Straighten or replace tubing.

 

punctured.

 

Flow generator operating erratically, ie, switching on and off, pressure varying at random

Water may have entered the air tubing.

Remove the water from the air tubing.

Pressure rises

You are talking, coughing,

inappropriately

voluntarily breath-holding

 

(eg, while rolling over in bed),

 

or intentionally breathing in

 

an unusual manner.

Avoid talking with the mask on, and breathe as normally as possible.

 

Severe mask leak or mouth

Correct your leak condition.

 

leak (greater than 30 L/min).

 

 

 

 

Alarm stays on continuously

Blockage in air circuit.

Ensure there is no barrier to

 

 

the passage of air.

 

Internal malfunction.

Return the device to your

 

 

equipment supplier for

 

 

service.

 

 

 

Troubleshooting 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Vpap Adapt SV Contents Definitions IntroductionVpap Adapt SV User/Owner ResponsibilityVpap Adapt SV Quick Setup Guide Vpap Adapt SV Components Vpap Adapt SV SystemTo the mask Flow generator MasksConnect this end Connect this end toAssembling the Vpap Adapt SV System Connect the power cordFront view of Vpap Adapt SV Attach the mask to the air tubingHumidifiers Connecting a HumidifierDo not tip the humidifier while it is connected to HumidAire 2i attached to the Vpap Adapt SV HumidAireHumidAire English Anti-bacterial Filter ResLinkSupplemental Oxygen Using DC Power to Run the Vpap Adapt SVStopping Treatment Using the Vpap Adapt SVStandby Mode Starting TreatmentUp/Down key Control Panel FunctionsLCD screen Start/Stop keyRight key red Adjusting SettingsAlarm LEDs and Alarm mute Left key greenExample You wish to change the setting for the mask you are usingNavigating the Patient menu MenusMask Settings MenuLearn Circuit Leak Alert Ramp Cpap mode onlyResults Menu SmartStopOptions Menu Servicing Menu Treatment ScreensTriggered by AlarmsLow Mask Pressure Alarm If a low pressure alarm soundsHigh Pressure / High Average Pressure Alarms Power Fail AlarmFlow Blocked Alarm Insufficient Pressure Support AlarmHigh Leak Alert Daily Cleaning and MaintenanceWeekly Periodically Air tubing assembly removed for cleaningFitting the filter Air FilterServicing Hypoallergenic Air FilterServicing Australia and New Zealand TroubleshootingGlossary Technical Specifications Inspiratory Trigger Characteristics Alarm specificationsIEC 601-1 classifications Mass flow sensor Glossary of symbolsEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index Index

VPAP Adapt SV specifications

The ResMed VPAP Adapt SV is a cutting-edge device designed to improve the quality of life for patients suffering from complex sleep apnea conditions, including central and obstructive sleep apnea. It combines advanced technology with user-friendly features to provide effective therapy while ensuring maximum comfort for users.

A standout feature of the VPAP Adapt SV is its Adaptive Servo-Ventilation (ASV) algorithm. This proprietary technology continuously monitors a patient’s breathing patterns and adjusts the airflow accordingly. By providing just the right amount of pressure support during inhalation and maintaining a minimal backup rate during exhalation, the device ensures optimal ventilation while minimizing the risk of over-ventilation. This responsiveness is crucial for patients who may experience fluctuating airway resistance and varying degrees of respiratory events.

The VPAP Adapt SV is equipped with a sophisticated data management system that tracks treatment progress in real time. It automatically collects information about usage, leak rates, and overall pressure settings, which can be easily accessed and reviewed by healthcare providers. This data-driven approach facilitates personalized treatment adjustments, empowering both patients and clinicians to make informed decisions.

Comfort is enhanced through various design features, including a quiet operation mechanism that minimizes noise disruption during sleep. The device offers a range of pressure settings that can be tailored to individual needs, allowing for a comfortable therapeutic experience. The VPAP Adapt SV is compatible with ResMed’s range of CPAP masks, which are ergonomically designed to fit securely without compromising comfort.

Another notable characteristic is its user-friendly interface, which simplifies the setup and adjustments needed for optimal therapy. Patients can easily navigate through various options on the bright display screen, making it accessible for users of all ages.

Additionally, the VPAP Adapt SV’s compact design makes it a portable option for those who travel frequently. It comes with a carrying case and can operate on both AC and DC power sources, ensuring that patients can maintain their therapy wherever they go.

In conclusion, the ResMed VPAP Adapt SV represents a significant advancement in respiratory therapy. With its Adaptive Servo-Ventilation technology, comprehensive data management, and focus on patient comfort, it provides a holistic approach to managing complex sleep apnea, making it a preferred choice for healthcare providers and patients alike.
Top Page Image Contents