ResMed VPAP Adapt SV manual Treatment Screens, Servicing Menu

Page 24

Servicing Menu

This menu displays the following information:

•SN—the flow generator’s serial number

•PCB—the flow generator’s PCB number (PCB—printed circuit board)

•SW—the version of software currently installed on the flow generator.

Treatment Screens

There are three Treatment screens displayed in the VPAP Adapt SV LCD. The LCD will display the Treatment screens when treatment commences, and during treatment if no key is pressed for 20 minutes.

Press the QuickView key at any point within a menu to display

Treatment Screen 1. You can return to your original screen if you press the QuickView key again within 20 minutes.

Press the Right key to move from a Treatment screen to the Standby screen. If an alarm is triggered while you are in the Treatment screens, the arrow will flash. Press the Down key until you reach the alarm message.

Scroll through the screens in the usual way, using the Up/Down key.

Treatment mode

Pressure

ASV

 

 

 

 

5.0--15.0

 

 

 

 

 

exit

 

 

 

 

 

 

 

 

Figure 16: Treatment Screen 1

Leak

 

Respiratory rate

LK:18L/min RR:12

VT: 428

Tidal volume

Figure 17: Treatment Screen 2

Minute ventilation

Target ventilation

 

 

 

 

MV:6.2

TARG:5.8

 

 

 

exit

 

 

 

 

 

 

 

 

 

 

Figure 18: Treatment Screen 3

Note: TARG is not a relevant parameter in CPAP mode.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Vpap Adapt SV Contents Introduction Vpap Adapt SVUser/Owner Responsibility DefinitionsVpap Adapt SV Quick Setup Guide Vpap Adapt SV System Vpap Adapt SV ComponentsMasks Connect this endConnect this end to To the mask Flow generatorConnect the power cord Assembling the Vpap Adapt SV SystemAttach the mask to the air tubing Front view of Vpap Adapt SVConnecting a Humidifier HumidifiersDo not tip the humidifier while it is connected to HumidAire HumidAire 2i attached to the Vpap Adapt SVHumidAire English ResLink Anti-bacterial FilterUsing DC Power to Run the Vpap Adapt SV Supplemental OxygenUsing the Vpap Adapt SV Standby ModeStarting Treatment Stopping TreatmentControl Panel Functions LCD screenStart/Stop key Up/Down keyAdjusting Settings Alarm LEDs and Alarm muteLeft key green Right key redYou wish to change the setting for the mask you are using ExampleMenus Navigating the Patient menuSettings Menu MaskLearn Circuit Ramp Cpap mode only Results MenuSmartStop Leak AlertOptions Menu Treatment Screens Servicing MenuAlarms Low Mask Pressure AlarmIf a low pressure alarm sounds Triggered byPower Fail Alarm High Pressure / High Average Pressure AlarmsInsufficient Pressure Support Alarm Flow Blocked AlarmHigh Leak Alert Cleaning and Maintenance DailyWeekly Air tubing assembly removed for cleaning PeriodicallyAir Filter ServicingHypoallergenic Air Filter Fitting the filterTroubleshooting Servicing Australia and New ZealandGlossary Technical Specifications Alarm specifications Inspiratory Trigger CharacteristicsIEC 601-1 classifications Glossary of symbols Mass flow sensorEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index Index

VPAP Adapt SV specifications

The ResMed VPAP Adapt SV is a cutting-edge device designed to improve the quality of life for patients suffering from complex sleep apnea conditions, including central and obstructive sleep apnea. It combines advanced technology with user-friendly features to provide effective therapy while ensuring maximum comfort for users.

A standout feature of the VPAP Adapt SV is its Adaptive Servo-Ventilation (ASV) algorithm. This proprietary technology continuously monitors a patient’s breathing patterns and adjusts the airflow accordingly. By providing just the right amount of pressure support during inhalation and maintaining a minimal backup rate during exhalation, the device ensures optimal ventilation while minimizing the risk of over-ventilation. This responsiveness is crucial for patients who may experience fluctuating airway resistance and varying degrees of respiratory events.

The VPAP Adapt SV is equipped with a sophisticated data management system that tracks treatment progress in real time. It automatically collects information about usage, leak rates, and overall pressure settings, which can be easily accessed and reviewed by healthcare providers. This data-driven approach facilitates personalized treatment adjustments, empowering both patients and clinicians to make informed decisions.

Comfort is enhanced through various design features, including a quiet operation mechanism that minimizes noise disruption during sleep. The device offers a range of pressure settings that can be tailored to individual needs, allowing for a comfortable therapeutic experience. The VPAP Adapt SV is compatible with ResMed’s range of CPAP masks, which are ergonomically designed to fit securely without compromising comfort.

Another notable characteristic is its user-friendly interface, which simplifies the setup and adjustments needed for optimal therapy. Patients can easily navigate through various options on the bright display screen, making it accessible for users of all ages.

Additionally, the VPAP Adapt SV’s compact design makes it a portable option for those who travel frequently. It comes with a carrying case and can operate on both AC and DC power sources, ensuring that patients can maintain their therapy wherever they go.

In conclusion, the ResMed VPAP Adapt SV represents a significant advancement in respiratory therapy. With its Adaptive Servo-Ventilation technology, comprehensive data management, and focus on patient comfort, it provides a holistic approach to managing complex sleep apnea, making it a preferred choice for healthcare providers and patients alike.
Top Page Image Contents