ResMed VPAP Adapt SV manual Humidifiers, Connecting a Humidifier

Page 10

Humidifiers

A humidifier may be required if you are experiencing dryness of the nose, throat, or mouth. The following ResMed humidifiers are compatible with the

VPAP Adapt SV:

HumidAire

HumidAire 2i

heated humidifier

heated humidifier

Humidifier accessory (HumidAire only)

Medium air tubing 21" (52 cm)

Figure 7: Humidifiers compatible with the VPAP Adapt SV

When using a humidifier, stop the VPAP Adapt SV by using the Start/Stop key or by removing the mask to trigger the SmartStop function. Do not switch the VPAP Adapt SV off at the power switch or the power source while it is running, as this could result in condensation in the motor.

Please refer to the relevant humidifier user manual for detailed instructions and warnings.

CAUTIONS

! • Be very careful not to allow water to enter the VPAP Adapt SV

as this could affect therapy and/or damage the device.

• Do not tip the humidifier while it is connected to the

VPAP Adapt SV. If water enters the VPAP Adapt SV device, turn off the main power switch at the back of the unit and unplug it from the power outlet. Return the unit to your equipment supplier for checking.

Connecting a Humidifier

Note: After connecting or removing a humidifier, always perform the Air Circuit Learn function (see page 21).

WARNING

! When using a humidifier, position it so that it is lower than your head will be during sleep, and at the same level or lower than the VPAP Adapt SV.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Vpap Adapt SV Contents User/Owner Responsibility IntroductionVpap Adapt SV DefinitionsVpap Adapt SV Quick Setup Guide Vpap Adapt SV System Vpap Adapt SV ComponentsConnect this end to MasksConnect this end To the mask Flow generatorConnect the power cord Assembling the Vpap Adapt SV SystemAttach the mask to the air tubing Front view of Vpap Adapt SVHumidifiers Connecting a HumidifierDo not tip the humidifier while it is connected to HumidAire HumidAire 2i attached to the Vpap Adapt SVHumidAire English ResLink Anti-bacterial FilterUsing DC Power to Run the Vpap Adapt SV Supplemental OxygenStarting Treatment Using the Vpap Adapt SVStandby Mode Stopping TreatmentStart/Stop key Control Panel FunctionsLCD screen Up/Down keyLeft key green Adjusting SettingsAlarm LEDs and Alarm mute Right key redYou wish to change the setting for the mask you are using ExampleMenus Navigating the Patient menuMask Settings MenuLearn Circuit SmartStop Ramp Cpap mode onlyResults Menu Leak AlertOptions Menu Treatment Screens Servicing MenuIf a low pressure alarm sounds AlarmsLow Mask Pressure Alarm Triggered byPower Fail Alarm High Pressure / High Average Pressure AlarmsFlow Blocked Alarm Insufficient Pressure Support AlarmHigh Leak Alert Daily Cleaning and MaintenanceWeekly Air tubing assembly removed for cleaning PeriodicallyHypoallergenic Air Filter Air FilterServicing Fitting the filterTroubleshooting Servicing Australia and New ZealandGlossary Technical Specifications Inspiratory Trigger Characteristics Alarm specificationsIEC 601-1 classifications Glossary of symbols Mass flow sensorEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index Index

VPAP Adapt SV specifications

The ResMed VPAP Adapt SV is a cutting-edge device designed to improve the quality of life for patients suffering from complex sleep apnea conditions, including central and obstructive sleep apnea. It combines advanced technology with user-friendly features to provide effective therapy while ensuring maximum comfort for users.

A standout feature of the VPAP Adapt SV is its Adaptive Servo-Ventilation (ASV) algorithm. This proprietary technology continuously monitors a patient’s breathing patterns and adjusts the airflow accordingly. By providing just the right amount of pressure support during inhalation and maintaining a minimal backup rate during exhalation, the device ensures optimal ventilation while minimizing the risk of over-ventilation. This responsiveness is crucial for patients who may experience fluctuating airway resistance and varying degrees of respiratory events.

The VPAP Adapt SV is equipped with a sophisticated data management system that tracks treatment progress in real time. It automatically collects information about usage, leak rates, and overall pressure settings, which can be easily accessed and reviewed by healthcare providers. This data-driven approach facilitates personalized treatment adjustments, empowering both patients and clinicians to make informed decisions.

Comfort is enhanced through various design features, including a quiet operation mechanism that minimizes noise disruption during sleep. The device offers a range of pressure settings that can be tailored to individual needs, allowing for a comfortable therapeutic experience. The VPAP Adapt SV is compatible with ResMed’s range of CPAP masks, which are ergonomically designed to fit securely without compromising comfort.

Another notable characteristic is its user-friendly interface, which simplifies the setup and adjustments needed for optimal therapy. Patients can easily navigate through various options on the bright display screen, making it accessible for users of all ages.

Additionally, the VPAP Adapt SV’s compact design makes it a portable option for those who travel frequently. It comes with a carrying case and can operate on both AC and DC power sources, ensuring that patients can maintain their therapy wherever they go.

In conclusion, the ResMed VPAP Adapt SV represents a significant advancement in respiratory therapy. With its Adaptive Servo-Ventilation technology, comprehensive data management, and focus on patient comfort, it provides a holistic approach to managing complex sleep apnea, making it a preferred choice for healthcare providers and patients alike.
Top Page Image Contents