ResMed VPAP Adapt SV manual Servicing, Hypoallergenic Air Filter, Fitting the filter

Page 30

Air Filter

Inspect the air filter every month and check if it is blocked by dirt or contains holes.

Air filter cover

The filter should be replaced every six months, or more often if the flow generator is operating in a dusty environment.

WARNING

! Do not wash the air filter once it has become soiled. The air filter is not washable or reusable.

Fitting the filter

• Remove the filter cover at the back of the flow generator.

• Remove and discard the old air filter.

• Insert a new filter, the blue tinted side facing towards you.

Note: Match the cut corner of the filter with the shape of the casing.

•Replace the air filter cover. The blue tinted side of the filter should be facing out.

Hypoallergenic Air Filter

The ResMed hypo-allergenic filter is a standard filter to which an electrostatic filter has been bonded to capture very small particles. The filter is intended for those users of ResMed flow generators who will benefit from enhanced filtering of the air delivered during treatment.

Inspect the air filter every month and check if it is blocked by dirt or contains holes.

The filter should be replaced every three months, or more often if the flow generator is operating in a dusty environment.

Fit as described above in “Air Filter”.

Servicing

This product (VPAP Adapt SV) should be inspected by an authorised ResMed Service Centre five years from the date of manufacture. Prior to this, the device is intended to provide safe and reliable operation provided that it is operated and maintained in accordance with the instructions provided by ResMed.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Vpap Adapt SV Contents User/Owner Responsibility IntroductionVpap Adapt SV DefinitionsVpap Adapt SV Quick Setup Guide Vpap Adapt SV System Vpap Adapt SV ComponentsConnect this end to MasksConnect this end To the mask Flow generatorConnect the power cord Assembling the Vpap Adapt SV SystemAttach the mask to the air tubing Front view of Vpap Adapt SVConnecting a Humidifier HumidifiersDo not tip the humidifier while it is connected to HumidAire HumidAire 2i attached to the Vpap Adapt SVHumidAire English ResLink Anti-bacterial FilterUsing DC Power to Run the Vpap Adapt SV Supplemental OxygenStarting Treatment Using the Vpap Adapt SVStandby Mode Stopping TreatmentStart/Stop key Control Panel FunctionsLCD screen Up/Down keyLeft key green Adjusting SettingsAlarm LEDs and Alarm mute Right key redYou wish to change the setting for the mask you are using ExampleMenus Navigating the Patient menuSettings Menu MaskLearn Circuit SmartStop Ramp Cpap mode onlyResults Menu Leak AlertOptions Menu Treatment Screens Servicing MenuIf a low pressure alarm sounds AlarmsLow Mask Pressure Alarm Triggered byPower Fail Alarm High Pressure / High Average Pressure AlarmsInsufficient Pressure Support Alarm Flow Blocked AlarmHigh Leak Alert Cleaning and Maintenance DailyWeekly Air tubing assembly removed for cleaning PeriodicallyHypoallergenic Air Filter Air FilterServicing Fitting the filterTroubleshooting Servicing Australia and New ZealandGlossary Technical Specifications Alarm specifications Inspiratory Trigger CharacteristicsIEC 601-1 classifications Glossary of symbols Mass flow sensorEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Index Index

VPAP Adapt SV specifications

The ResMed VPAP Adapt SV is a cutting-edge device designed to improve the quality of life for patients suffering from complex sleep apnea conditions, including central and obstructive sleep apnea. It combines advanced technology with user-friendly features to provide effective therapy while ensuring maximum comfort for users.

A standout feature of the VPAP Adapt SV is its Adaptive Servo-Ventilation (ASV) algorithm. This proprietary technology continuously monitors a patient’s breathing patterns and adjusts the airflow accordingly. By providing just the right amount of pressure support during inhalation and maintaining a minimal backup rate during exhalation, the device ensures optimal ventilation while minimizing the risk of over-ventilation. This responsiveness is crucial for patients who may experience fluctuating airway resistance and varying degrees of respiratory events.

The VPAP Adapt SV is equipped with a sophisticated data management system that tracks treatment progress in real time. It automatically collects information about usage, leak rates, and overall pressure settings, which can be easily accessed and reviewed by healthcare providers. This data-driven approach facilitates personalized treatment adjustments, empowering both patients and clinicians to make informed decisions.

Comfort is enhanced through various design features, including a quiet operation mechanism that minimizes noise disruption during sleep. The device offers a range of pressure settings that can be tailored to individual needs, allowing for a comfortable therapeutic experience. The VPAP Adapt SV is compatible with ResMed’s range of CPAP masks, which are ergonomically designed to fit securely without compromising comfort.

Another notable characteristic is its user-friendly interface, which simplifies the setup and adjustments needed for optimal therapy. Patients can easily navigate through various options on the bright display screen, making it accessible for users of all ages.

Additionally, the VPAP Adapt SV’s compact design makes it a portable option for those who travel frequently. It comes with a carrying case and can operate on both AC and DC power sources, ensuring that patients can maintain their therapy wherever they go.

In conclusion, the ResMed VPAP Adapt SV represents a significant advancement in respiratory therapy. With its Adaptive Servo-Ventilation technology, comprehensive data management, and focus on patient comfort, it provides a holistic approach to managing complex sleep apnea, making it a preferred choice for healthcare providers and patients alike.
Top Page Image Contents