Scag Power Equipment STC61V-25CV-FR manual Remember Your Mower is only AS Safe AS the Operator

Page 2

WARNING

FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT

IN SERIOUS INJURY OR DEATH.

•Read this manual completely as well as other manuals that came with your mower.

•DO NOT operate on steep slopes. To check a slope, attempt to back up it (with the cutter deck down). If the machine can back up the slope without the wheels slipping, reduce speed and use extreme caution.

•Under no circumstances should the machine be operated on slopes greater than 15 degrees. ALWAYS FOLLOW OSHA APPROVED OPERATION.

•DO NOT mow on wet grass. Wet grass reduces traction and steering control.

•Keep all shields in place, especially the grass discharge chute.

•Before performing any maintenance or service, stop the machine and remove the spark plug wire and ignition key.

•If a mechanism becomes clogged, stop the engine before cleaning.

•Keep hands, feet and clothing away from power-driven parts.

•Keep others off the mower (only one person at a time)

REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!

Hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment.

This manual covers the operating instructions and illustrated parts list for:

STC48V-26BS

with a serial number of

D6500001 to D6599999

 

 

 

STC52V-23BV

with a serial number of

D6600001 to D6699999

 

 

 

STC52V-25CV

with a serial number of

E2400001 to E2499999

 

 

 

STC52V-25CV-FR

with a serial number of

E3200001 to E3299999

 

 

 

STC61V-23BV

with a serial number of

D6400001 to D6499999

 

 

 

STC61V-25CV

with a serial number of

E2500001 to E2599999

 

 

 

STC61V-25CV-FR

with a serial number of

E3300001 to E3399999

 

 

 

SMTC-48V

with a serial number of

D9100001 to D9199999

 

 

 

SMWC-52V

with a serial number of

D9200001 to D9299999

 

 

 

SMWC-61V

with a serial number of

D9300001 to D9399999

 

 

 

Always use the entire serial number listed on the serial number tag when referring to this product.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Table of Contents Limited Warranty Commercial Equipment Inside Back CoverDirection Reference General InformationIntroduction Servicing The Engine and Drive Train ComponentsSymbols Symbol DescriptionBefore Operation considerations Safety InformationSignal Words Operation Considerations Section Roll-over protection system Foldable Roll-over protection system if equippedFoldable Roll-Over Protection System Maintenance Considerations & storage Safety and Instructional Decals Install Belt COvER BeforeElectrical SpecificationsEngine TractorHydraulic System Weights and Dimensions 48V 52V 61VCutter Deck ProductivityOperating Instructions Controls and Instrument IdentificationSafety Interlock System Initial RUN-IN ProceduresForward Travel Starting the EngineGround Travel and Steering Engaging the Deck Drive Cutter Blades Reverse TravelAfter Operation Hillside OperationParking the Mower Removing Clogged MaterialRecommendations for Mowing Adjusting Cutting HeightMoving Mower with Engine Stopped Adjusting the Steering Levers Towing optional hitch accessoryTroubleshooting Cutting Conditions Condition Cause CureTroubleshooting Cutting Conditions Contd Scalping Blades Hitting Travel Adjustments AdjustmentsParking Brake Adjustment Neutral Adjustment Tracking AdjustmentCutter Deck Adjustments Throttle Control and Choke AdjustmentsBelt Adjustment Belt AlignmentAdjustment ROD Lock NUT Cutter Deck Pitch Cutter Deck HeightPosition Custom-Cut Baffle Adjustment cURRENT pRODUCTION Custom-Cut Baffle AdjustmentPosition Custom-Cut Baffle Adjustment eARLY mODELS Position Custom-Cut Baffle Adjustment Maintenance Maintenance Chart Recommended Service IntervalsMaintenance Chart Recommended Service Intervals Contd LubricationLubrication Fitting Points Checking Hydraulic Oil Level Changing Hydraulic OilEngine Oil Engine Fuel SystemReplacing In-Line Fuel Filter Elements Engine Air CleanerCleaning and/or Replacing Air Cleaner Element Jump Starting BatteryCharging the Battery Cutter Blades Blade ReplacementDrive Belts Blade InspectionTires BODY, DECK, and UpholsteryIllustrated Parts List Scag Approved Attachments and Accessories48V & 52V Cutter Decks Description 61V Cutter Deck 424367 Dust Shield 483210 Idler Pulley, 5 Dia Cutter Deck Controls Cutter Deck Controls Sheet Metal Components 482619 Tire, 13 x 6.5-6 Smooth 483736 STC Fixed ROLL-OVER Protection System STC Fixed ROLL-OVER Protection System STC Foldable ROLL-OVER Protection System STC Foldable ROLL-OVER Protection System Drive System Components 04019-04 Nut, Serr. Flange 3/8-16 04001-136 Engine & Attaching Parts Engine and Attaching Parts Steering Components Damper orange colored print Damper blue colored print Brake Components Brake Components 33 47 Fuel and Hydraulic System Electrical System Battery, 330CCA Not Available Through Scag BDP-10A Hydraulic Pump Assembly Housing Kit Install Belt COvER Before Operating Machine482166R STC 2008 RDP2 Electrical Schematic Limited Warranty Commercial Equipment Garantía Limitada Equipo Comercial Precaución LlantasCuchilla la de Reemplazo .C Cuchilla la de Reemplazo 9-7 FiguraPara apropiada protección la lleve Siempre Cuchillas las de Afilado 8-7 FiguraSeguridad garantizar para Transmisión DE CorreasCorte DE Cuchillas Rajada o rota cuchilla una suelde nuncaDel elemento del reemplazo y/o Limpieza .A BateríaGases producen ácido-plomo baterías Las Advertencia Motor DEL Combustible DE SistemaAceite de filtro del elemento del Cambio .C Cárter del aceite de Cambio .BCárter del aceite de nivel del Verificación .A Hidráulico aceite de nivel del Verificación .A Hidráulico SistemaHidráulico aceite de Cambio .B Lubricación DE Grasa DE Conexiones Figura LA VEA Grasa DE Conexión DE Lubricación DE Tabla LubricaciónMantenimiento Recomendados Servicio DE Intervalos Mantenimiento DE TablaSección Posiciones De personalizado corte de deflector del AjusteCorte de plataforma la de Altura Corte Corte de plataforma la de InclinaciónCorte de plataforma la de Nivel DE Plataforma LA DE AjustesAjustes Estrangulación Aceleración DE Control Correa LA DE AlineaciónCorrea LA DE Ajuste Alineación de AjusteDirección De control de varilla la de Ajuste .3-6 Figura Neutral AjusteDesplazamiento DE Ajustes Freno de Ajuste .1-6 Figura AjustesDE Freno DEL Ajuste Solución Causa Condición Solución Causa Condición Continuación Fallas DE Solución De Franjas Vetas Corte de trayectoriasEntre cortar sin césped La en cortar sin céspedOpcional Enganche de accesorio Remolque Advertencia PlataformaCortacésped DEL Estacionamiento Detenido Motor EL CON Cortacésped DEL DesplazamientoAtascado Material DEL Retiro Cuesta UNA EN Operación Corte DE Cuchillas Plataforma DE Transmisión LA DE ConexiónPrecaución Dirección Y Terreno EL EN DesplazamientoMotor DEL Arranque Seguridad DE Bloqueo DE SistemaFigura combustible de cambio de Válvula Instrumentos Controles DE IdentificaciónProductividad Corte DE PlataformaEléctrico Sistema TractorSeguridad DE Y Instructivas Calcomanías Cuchillas las suelde NUNCAni enderece.cuchillas Almacenamiento Y Mantenimiento DE ConsideracionesRops del Bisagra 2-2 Figura Vuelco contra protección de plegable Sistema 1-2 FiguraVuelco Contra Protección DE Sistema Advertencia Operación DE ConsideracionesAdvertencia Introducción Operación LA a Previas ConsideracionesSeñalización DE Palabras Descripción Símbolo ISO Símbolos Instrucciones DE Referencia Scag POR Aprobados Dispositivos USE SóloAjustes 6 Sección Repuesto de Piezas 8 SecciónMantenimiento 7 Sección Seguridad de Información 2 Sección Operación De Instrucciones 4 SecciónEspecificaciones 3 Sección General Información 1 SecciónAdvertencia Operadordel Manual
Top Page Image Contents