F13
F14
English
9. Maintenance
■AIR INLET SCREEN
IMPORTANT
•Blowing air is taken in from the air inlet screen. When air flow has dropped down during operation, stop the engine and inspect the air inlet screen for blocking by obstacles.
•Note that failure to remove any such obstacles may result in the engine becoming overheated and damaged.
WARNING
Never use the blower without the screen at the air intake of the blower. Before each use, check that, the screw (1) is securely tightened and is free from any damage.
(1) Screw (2) Air inlet screen
■PROCEDURES TO BE PERFORMED AFTER
EVERY 100 HOURS OF USE
•Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.
•Tighten all screws, bolts, and fittings.
10. Storage
BEFORE STORING THE BLOWER:
1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.
2.Remove the spark plug and drop a spoonful of 2- cycle oil into the cylider. Crank the engine several time and install the spark plug.
3.Store unit in a dry, dust free place, out of the reach of children.
11. Disposal
•When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.
12. Optional vacuum kit usage
•See the operating instructions included with the vacuum kit.
36