RedMax LRTZ2500 manual If Someone Comes, Maintenance,  10 

Page 10

5. For safe operation

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the engine before performing any maintenance or checking procedures.

WARNING

The metallic parts reach high temperatures immediately after stopping the engine.

3.When replacing any part, or when replacing the oil or any lubricant, always be sure to use only

RedMax products or products which have been certified by RedMax for use with the RedMax product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.

5.Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.

6.Under no circumstances should you ever take apart the product or alter it in any way. Doing so might result in the product becoming damaged during operation or the product becoming unable to operate properly.

10

Image 10
Contents LRTZ2500 Information Safety First ContentsParts location Specifications 4  Symbols on the machine  5 Working Circumstance For safe operationWorking Condition  6 Working Plan  7 Starting the Engine Before Starting the Engine 8  Using the Product  9 If Someone Comes Maintenance 10  Transportation Handling Fuel 11  Set up  12 Balance Unit SE4 Attaching the Trimming Mechanism SE4 13   14  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OILFor Your Engine LIFE, Avoid Fueling the Unit 15  OP3 OP4 Starting Engine OperationOP1  16 OP5 Adjusting Throttle CableAdjusting Idling Speed OP6 OP6 Stopping Engine OP3OP7 Adjusting the Angle of the Cutting Blades OP7 18  Blades MA1 MaintenanceMaintenance Chart 19 AIR Filter MA2 MA3 MA4 Quick TIPGear Case Fuel Filter 21   22  Procedures to be Performed After Every 100 Hours of USEMA8 Intake AIR Cooling VentStorage  23 Check Probable Causes Action Troubleshooting guide 24  Parts list  25 Drive Unit LRTZ2500 S/N 000000 and up  26  27  Engine Unit LRTZ2500 S/N 000479 and up  28  29  Manufacturer’s warranty coverage Model LRTZ2500 Year Limited Warranty RemedyKomatsu Zenoah America INC