RedMax LRTZ2500 manual Information

Page 2

INFORMATION

This machine is equipped with an Overload Cancellation Mechanism.

When the cutting blades have got into metal wires or those twigs difficult to cut, the mechanism acts as a shock absorber, and protects the drive gears and the blades from severe reaction which could give damage to those parts.

When the blades are frequently caught by twigs, please check the following points:

1.Size of the twigs. NEVER TRY TO CUT TWIGS THICKER THAN 3/16” (5mm).

2.Condition of the blade edges. REPLACE THE WORN OUT BLADES.

For the detail of the mechanism, please see below. Thank you for choosing our product.

Image 2

Contents LRTZ2500 Information Safety First Contents 4  SpecificationsParts location Symbols on the machine  5 Working Circumstance For safe operationWorking Condition  6 Working Plan  7  8  Before Starting the EngineStarting the Engine Using the Product  9  10  MaintenanceIf Someone Comes  11  Handling FuelTransportation Set up  12  13  SE4 Attaching the Trimming Mechanism SE4Balance Unit  14  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OIL 15  Fueling the UnitFor Your Engine LIFE, Avoid OP3 OP4 Starting Engine OperationOP1  16 OP5 Adjusting Throttle CableAdjusting Idling Speed OP6 OP6 Stopping Engine OP3 18  Adjusting the Angle of the Cutting Blades OP7OP7 Blades MA1 MaintenanceMaintenance Chart 19 AIR Filter MA2 MA3 MA4 Quick TIPGear Case Fuel Filter 21   22  Procedures to be Performed After Every 100 Hours of USEMA8 Intake AIR Cooling VentStorage  23  24  Troubleshooting guideCheck Probable Causes Action Parts list  25 Drive Unit LRTZ2500 S/N 000000 and up  26  27  Engine Unit LRTZ2500 S/N 000479 and up  28  29  Manufacturer’s warranty coverage Model LRTZ2500 Year Limited Warranty RemedyKomatsu Zenoah America INC