RedMax LRTZ2500 manual SE4 Attaching the Trimming Mechanism SE4, Balance Unit,  13 

6. Set up

SE4

■ATTACHING THE TRIMMING MECHANISM (SE4)

1. Remove the cap on the end of the main pipe.

2. Remove the screw screwed into the end of the trimming mechanism.

3. Insert the end of the trimming mechanism into the main pipe.

4. Line up the hole on the end of the trimming mechanism into which the screw is to be inserted with the hole on the main pipe, and screw the screw firmly in.

5. Using a 10-mm wrench, screw in the hexagonal bolt provided to fix the trimming mechanism into place.

(1)Main pipe

(2)Trimming mechanism

(3)Screw hole

(4)Screw

(5)Fastening bolt

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Depending on the working posture, slide clamp up or down until unit balances and the strap fits your body.

13 