Makita EM4250 Servicing Instructions, Replacement of Engine OIL, Daily checkup and maintenance

Page 18

Align the protrusion on the underside of the cover with the slots of the eyelets.

Then push cover firmly onto the housing to secure it.

Cover

Protrusion

Slot of eyelet

SERVICING INSTRUCTIONS

CAUTION : Before doing any work on the Brush cutter/Grass trimmer, always stop the engine and pull the plug cap off the spark plug (see “checking the spark plug”).

Always wear protective gloves!

To ensure a long service life and to avoid any damage to the equipment, the following servicing operations should be performed at regular intervals.

Daily checkup and maintenance

Before operation, check the machine for loose screws or missing parts. Pay particular attention to the tightness of the cutter blade or nylon cutting head.

Before operation, always check for clogging of the cooling air passage and the cylinder fins. Clean them if necessary.

Perform the following work daily after use:

Clean the Brush cutter/Grass trimmer externally and inspect for damage.

Clean the air filter. When working under extremely dusty conditions, clean the filter the severall times a day.

Check the blade or the nylon cutting head for damage and make sure it is firmly mounted.

Check that there is sufficient difference between idling and engagement speed to ensure that the cutting tool is at a standstill while the engine is idling (if necessary reduce idling speed).

If under idling conditions the tool should still continue to run, consult your nearest Authorized Service Agent.

Check the functioning of the I-O switch, the lock-off lever, the control lever, and the look button.

REPLACEMENT OF ENGINE OIL

Deteriorated engine oil will shorten the life of the sliding and rotating parts to a great extent. Be sure to check the period and quantity of replacement.

ATTENTION : In general, the engine main unit and engine oil still remain hot just after the engine is stopped. In replacement of oil, confirm that the engine main unit and engine oil are sufficiently cooled down. Otherwise, there may remain a risk of scald.

Note: If the oil filled above the limit, it may be contaminated or may catch fire with white smoke.

Interval of replacement : Initially, every 20 operating hours, and subsequently every 50 operating hours

Recommended oil : SAE10W-30 oil of API Classification SF Class or higher (4-stroke engine oil for automobile)

In replacement, perform the following procedure.

1)Confirm that the tank cap is tightened securely.

2)Detach the oil gauge.

Keep the oil gauge free from dust or dirt.

Fuel tank cap

Oil gauge

18

Image 18
Contents EM4250CA EM4251CA Symbols EnglishIntended use of the machine Safety InstructionsGeneral Instructions Personal protective equipmentRefuelling Kickback Maintenance instructionsMethod of operation Kickback preventionFirst Aid When asking for help, please give the following informationNever straighten or weld damaged cutting tools PackagingTechnical Data EM4250, EM4251 EM4251/EM4251CA EM4250/EM4250CA ModelDesignation of Parts EM4250/EM4250CA Brush Cutter EM4251/EM4251CA String trimmerMounting of Handle For machines with U Handle modelsFor machines with Loop Handle models Mounting of Protector Mounting of Cutter Blade or Nylon Cutter Head For EM4250/EM4250CA with the hex wrench still in placeMounting of nylon cutting head Point 1 in Replacement of Oil Oil Gauge Before Start of OperationInspection and Refill of Engine Oil Refueling Storage OfmachineandrefilltankPoints in Operation and HOW to Stop Correct Handling of MachineStarting For machine with U Handle or Loop Handle OpenStopping Adjustment of LOW-SPEED Rotation IdlingResharpening the Cutting Tool Startup after warm-up operationNylon Cutting Head OperationReplacing the nylon cord Replacement of Engine OIL Daily checkup and maintenanceServicing Instructions Cleaning of AIR Cleaner Points in Handling Air Cleaner ElementPoints on OIL Cleaning of Parts Cleaning of Fuel FilterReplacement of Fuel Pipe Replacement of Gaskets and PackingsFault location StorageOperating time Troubleshooting Emission Compliance Period MANUFACTURER’S Warranty Coverage Page Procedure Every 8 hours daily Every 8 hours dailyFederal Emission Component Defect Warranty Obtaining Warranty Service HOW to Make a Claim Symboles FrançaisUtilisation spéciale de la machine Consignes DE SécuritéInstructions générales Équipement personnel de protectionRavitaillement MètresEffet de retour Instructions de maintenanceMéthode dutilisation Outils de coupePremier secours EmballageCaracteristiques Techniques EM4250/EM4250CA, EM4251/EM4251CA Nomenclature DES Pièces Montage DE LA Poignée Pour les modèles à polgnée en UMachines à poignée simple Montage DU Dispositif DE Protection Montage DE LA Lame DE Coupe OU DE LA Téte DE Coupe À FIL Montage du dispositif de coupe à filAvant Mise EN Marche Controle ET Ravitaillement DE L’HUILE MoteurRavitaillement ENTREPÔSAGEDEL’APPAREILETDURÉSERVOIRDERAVITALLEMENTFixation du harnais Manipulation Correcte DE LA MachineConsignes DE Mise EN Marche ET Arrêt DE LA Machine RetraitPour les machines à poignée en U ou en Boucle Consignes de sécurité lors du fonctionnementDémarrage après réchauffage Réaffûtage DE Loutil DE CoupeReglage DE LA Marche a Petite Vitesse AU Ralenti Verification DE Larotation Apetite VitesseRemplacement du fil en nylon Tête de coupe à fil en nylonFonctionnement Remplacement DE L’HUILE a Moteur Contrôle et opérations de maintenance réguliersInstructions Relatives AUX Réparations Nettoyage DU Filtre a AIR ESSENTIELSPOURL’HUILEContôle DE LA Bougie Dallumage Remplacement DU Tuyau a CarburantRemplacement DES Joints ET Garnitures Graissage DU Carter D’ENGRENAGERemisage Localisation des défautsDurée de marche Depannage Simbolos Lista de contenidos PáginaUso intentado de la máquina Instrucciones DE SeguridadInstrucciones generales Equipo Personal de ProtecciónReabastecimiento Herramientas de Corte Método de trabajoContragolpe Cabezal de NylonNunca rectificar o soldar las herramientas de corte dañadas Primeros AuxiliosEmbalaje Datos Técnicos EM4250/EM4250CA, EM4251/EM4251CA EM4251/EM4251CA EM4250/EM4250CA ModeloDenominación DE Partes EM4250/EM4250CA Desbrozadora EM4251/EM4251CA CortabordesMontaje DEL Manillar Para máquinas con manillar en UPara máquinas con manillar cerrado Para EM4250/EM4250CA, EM4251/EM4251CA Montaje DEL ProtectorPara EM4250/EM4250CA USO DE Protector Para Hojas METALICAS/CORTADOR DE CuerdaMontaje DE LA Hoja DE Corte O Cabezal DE Corte DE Nylon Para EM4250/EM4250CA con la llave hexagonal todavía puesutaMontaje de la cabeza de corte de nylon Antes DE Empezar EL Trabajo Inspección Y Reabastecimiento DE Aceite DE MotorPunto 1 de reabastecimiento de aceite bayoneta de aceite Reabastecimiento DE Combustible Almacenaje DE Lamáquinay Deltanque DE ReabastecimientoUSO Correcto DE LA Máquina Puntos Relacionados CON EL Manejo Y LA ParadaArranque Máquina con manillar U ó cerrado Precauciones durante la operaciónArrancar después de la operación de calentamiento Afilar LA Herramienta DE CorteAjuste DEL Giro a Baja Velocidad Ralentí CuidadoCabezaldenylon Sustitución del cabezal de NylonInstrucciones DE Servicio Cambio DEL Aceite DEL MotorComprobación y mantenimiento diarios Limpieza DEL Depurador DE Aire Puntos Relacionados CON EL AceiteManipulación del elemento del filtro de aire Limpieza DEL Filtro DE Combustible Comprobación DE LA BujiaSuministro DE Grasa a LA Caja DE Engranajes Cambio DE LA Tubería DE CombustibleAlmacenamiento Atención después de almacenamiento de largo tirmpoLocalizacion de averias Tiempo de Después Diaria-m Funcionamiento Iinvestigación DE Averías Page 11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502, Japan
Related manuals
Manual 76 pages 44.63 Kb

EM5250CA, EM4250 specifications

The Makita EM4251CA and EM4250CA models are the latest additions to Makita's robust range of outdoor power equipment, specifically designed for professional landscapers and gardening enthusiasts. These brushcutters are known for their powerful performance, ease of use, and advanced technologies that enhance efficiency and durability.

The Makita EM4251CA features a displacement of 25.4cc, while the EM4250CA is slightly larger, with a 30.5cc engine. Both models are equipped with a high-performance 2-stroke engine that delivers impressive power and torque for tackling thick grass, weeds, and underbrush. The engines are designed for low emissions and fuel consumption, contributing to environmentally friendly operation while maintaining compliance with the latest regulatory standards.

One of the standout features of these brushcutters is the Easy Start System, which significantly reduces the effort required to start the engine. This system incorporates a spring-assisted starter that provides a smooth and reliable start every time. Additionally, the models offer a semi-automatic choke system that adjusts fuel flow for optimal performance in varying conditions.

For user comfort, the EM4251CA and EM4250CA are designed ergonomically, with a lightweight construction that enhances maneuverability without compromising strength. The adjustable bike handle provides solid control during operation, minimizing user fatigue during lengthy tasks. Both models also feature anti-vibration technology that reduces vibrations transmitted to the user, ensuring a more comfortable experience.

A robust and durable design is another hallmark of Makita's brushcutters. The fuel tank is constructed from high-quality materials to resist impacts and environmental factors, while the shaft is reinforced to withstand rigorous use. The inclusion of a reinforced cutter head allows for versatile cutting options, accommodating both trimmer line and metal blades for various applications.

For added convenience, these models are equipped with a soft grip handle that provides comfort during extended use, alongside a quick-release harness that allows for swift transitions between tasks. Overall, the Makita EM4251CA and EM4250CA brushcutters represent a blend of power, efficiency, and user-oriented design, making them ideal tools for anyone serious about maintaining their outdoor spaces.

With their mix of advanced technology and practical features, the EM4251 and EM4250 models ensure that users can tackle tough landscaping jobs with confidence and ease, making them invaluable assets for both professionals and hobbyists alike.