Makita UC 3000, UC 3500, UC 4000 manual Extract from the spare parts list, Guarantee, Accessories

Page 18

Guarantee

MAKITA guarantees the highest quality and will therefore reimburse all costs for mending through replacement of damaged parts as a result of material or production faults, which occur within the guarantee time after purchase.

Please, note that in some countries particular guarantee conditions may exist. In case of any doubts, please, contact your salesman who is responsible for the guarantee of the product.

We ask for your understanding that we cannot accept any responsibility for damage caused by:

•Disregard of the instruction manual.

•Non-performance of the required maintenance and cleaning instructions.

•Normal wear and tear.

•Obvious overload due to permanent excess of the upper limits of capacity.

•Use of guide bars and saw chains which have not been approved.

•Use of guide bar and saw chain lengths which have not been approved.

•Use of force, improper use, misuse or accidents.

•Damage caused by overheating due to dirt obstructing the cool air supply at the motor case.

•Use of unsuitable spare parts or parts which are not original MAKITA parts, as far as they have caused the damage.

•Use of unsuitable or old oil.

•Damage related to conditions arising from lease or rent contracts.

•Works on the chain saw by unskilled persons or performance of inappropriate repairs.

Cleaning, servicing and adjustment works are not covered by the guarantee. All repairs covered by the guarantee are to be performed by a MAKITA service center.

Extract from the spare parts list

CAUTION: These accessories or attachments are recommended for use with your MAKITA tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.

Included in the delivery inventory

1

2 3

 

 

 

 

8

 

 

 

 

 

4

 

 

 

 

 

 

5

 

 

 

 

 

 

6

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

9

 

 

 

 

10

 

 

 

Pos. MAKITA No.

Qty. Denomination

3000

3500

4000

1

205 114 201

1

Oil tank cap compl.

1

1

1

2

901 505 354

1

Screw for chain tightener

1

1

1

3

001 213 041

1

Nut with pin

1

1

1

4

923 208 004

1

Fastening nut

1

1

1

5

225 213 100

1

Sprocket guard

1

1

1

6

957 802 410

2

Carbon brushes

1

1

1

7

442 030 661

1

Sprocket nose bar 12" (30 cm)

1

 

 

7

442 035 661

1

Sprocket nose bar 14" (35 cm)

 

1

 

7

442 040 661

1

Sprocket nose bar 16” (40 cm)

 

 

1

8

528 091 046

1

Saw chain 3/8" for 12"

1

 

 

8

528 091 052

1

Saw chain 3/8" for 14"

 

1

 

8

528 091 056

1

Saw chain 3/8" for 16"

 

 

1

9

952 100 633

1

Chain protection cover (12”-16” )

1

1

1

10

941 713 001

1

Universal wrench

1

1

1

Accessories

(not included in the delivery inventory)

1

3

4

25

Pos. MAKITA No. Qty. Denomination

1

953 100 090

1

Chain gauge 3/8”

2

953 004 010

1

File handle

3

953 003 090

1

Round file ø 4 mm

4

953 003 060

1

Flat file

5

953 030 010

1

File holder compl. 3/8”

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Owner’s Safety Manual Table of contents Thank you for your trust in our productPacking Symbols Delivery inventoryImportant Safety Instructions Read ALL Instructions Stay Alert Disconnect Chain SawOutdoor Use Extension Cords Check Damaged Parts Guard Against KickbackUse of Extension Cord Power SupplyReplacement Parts Polarized PlugsChain Saw Nomenclature Putting Into Operation Mounting the guide bar and saw chainTightening the saw chain Chain brake Chain brake maintenanceChecking the chain tension HintSaw chain oil Refilling the oil tankWaste oil Switching on the motor Holding the chain sawChecking the chain lubrication Using the chain sawChecking the chain brake Felling a treeBucking a log Felling back cutLimbing a tree Carrying toolSharpening the saw chain MaintenanceFiles and how to work with them 65 mm 025 MinCleaning the guide bar lubricating the sprocket nose Protective gloves must be wornReplacing the saw chain Inspecting and replacing the carbon brushesMalfunction System Observation Cause Maintenance and repair Service, spare parts and guaranteeInstructions for periodic maintenance Spare partsAccessories Extract from the spare parts listGuarantee Included in the delivery inventoryTechnical data Space for notesTable de matiè res Travaux DE MaintenanceNous vous remercions pour votre confiance EmballageSymboles Livraison complè teAvertissement Tenez compte de l’environnement de travail Utilisez les outils convenablesMaintenez la zone de travail propre et rangé e Pré servez-vous des chocs é lectriquesDé branchez la tronç onneuse Vé rifiez les piè ces endommagé esAlimentation é lectrique Utilisation du cordon prolongateurConservez Avec Soin CES Instructions Piè ces dé taché esNomenclature des piè ces Dé taché es Mise EN Route Tendre la chaîne de sciageMontage du guide-chaîne et de la chaîne Entretien du frein de chaine et du frein de ralentissement Contrô le de la tension de la chaîneFrein de chaîne Conseil PratiqueHuile Usagé e Huile de chaîneRemplir le ré servoir d’huile Mettre le moteur en marche Maintien de la tronç onneuseRepli Utilisation de la tronç onneuseEncoche d’abattage Longueurs d’arbreDé bitage Coupe d’abattageEbranchage Transport de l’outilTravaux DE Maintenance Affû tage de la chaîneLime et guidage de la lime Nettoyer le guide-chaîne Regraisser l’é toile de dé viation Porter impé rativement des gants de protectionRecherche de pannes Nouvelle chaîne de sciageVé rifier / remplacer les balais de charbon Voir extrait de la liste de piè ces de rechangeInstructions d’entretien et de maintenance pé riodiques Entretien et ré parationsPiè ces de rechange Garantie AccessoiresExtrait de la liste de piè ces de rechange Livraison complè teCaracté ristiques techniques Ré servé e aux notesMakita U.S.A., Inc Makita Canada Inc

UC 3000, UC 3500, UC 4000 specifications

Makita, a leader in power tools, has developed a range of electric chainsaws designed for efficiency, power, and user comfort. Among these, the UC 3000, UC 3500, and UC 4000 models stand out, each offering unique features tailored to different cutting needs.

The Makita UC 3000 is an excellent choice for light to medium-duty tasks. It sports a 3000-watt motor, providing ample power for trimming branches, cutting firewood, and general garden maintenance. One of its key features is the tool-less chain tensioning system, which allows users to adjust the chain quickly and safely without the need for additional tools. The UC 3000 is equipped with an automatic chain lubrication system that ensures the chain runs smoothly and maintains optimal performance. Weighing relatively light, this model promotes user comfort and reduces fatigue during prolonged use.

Moving up in power, the Makita UC 3500 delivers a robust 3500-watt motor. This model is well-suited for more demanding jobs, such as cutting larger trees or heavy-duty landscaping tasks. The UC 3500 also features the tool-less chain tensioning system, providing an efficient and hassle-free experience. The automatic oiling mechanism continues to support the chain’s health, ensuring longevity and consistent performance. Additionally, the UC 3500 includes an ergonomic design with a comfortable grip to minimize vibrations, enhancing user control during operation and improving overall safety.

The UC 4000 takes power and performance to the next level, boasting a strong 4000-watt motor. This model is ideal for professional landscapers and those who regularly undertake heavy-duty cutting tasks. The UC 4000 combines the convenient tool-less chain tensioning system and automatic lubrication features found in its smaller counterparts but also incorporates advanced safety features such as a kickback brake. This ensures immediate chain stoppage if the chainsaw is used improperly, increasing user safety significantly. The lightweight design paired with an ergonomic handle makes this model manageable for extended periods while providing excellent balance.

In summary, the Makita UC 3000, UC 3500, and UC 4000 offer a versatile range of electric chainsaws suitable for various applications. Each model combines effective motors with user-friendly features and innovative technologies, ensuring that users can tackle cutting jobs with confidence and efficiency. Whether for casual gardening or professional landscaping, Makita's chainsaws are built to meet the demands of users at any skill level.
Top Page Image Contents