Makita UC 3000, UC 3500, UC 4000 Disconnect Chain Saw, Outdoor Use Extension Cords, Stay Alert

Page 5

saw by the cord or pull it to disconnect from receptacle. Keep cord from oil and sharp edges. Inspect extension cords periodically and replace if damaged. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.

-Disconnect Chain Saw

Disconnect chain saw when not in use, before servicing, and when changing accessories and attachments, such as saw chain and guard (6).

-Outdoor Use Extension Cords

Use only extension cords intended for use outdoors and so markerd.

-Stay Alert

Watch what you are doing. Use common sense. Do not operate chain saw when you are tired. Keep all parts of the body away from the saw chain when the motor is operating. Before you start the saw, make sure the saw chain is not contacting anything.

-Check Damaged Parts

Before further use of the chain saw, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches be replaced by authorized service center. Do not use chain saw if the switch does not turn the saw on and off. Do not operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled (7). Be sure that the saw chain stops moving when the trigger is released.

-Guard Against Kickback

WARNlNG: KICKBACK may occur when the nose or tip of the guide bar touches an object (8), or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious injury to user. The following precautions should be followed to minimize kickback:

-Grip saw firmly. Hold the chain saw firmly with both hands when the motor is running (9). Use a firm grip with thumbs and fingers encircling the chain saw handles.

-Do not over reach.

-Keep proper footing and balance at all times.

-Don’t let the nose of the guide bar contact a log, branch, ground, or other obstruction.

-Don’t cut above shoulder height (10).

-Use devices such as low kickback chain, chain brakes and special guide bars that reduce the risks associated with kickback.

-Only use replacement bars and chains specified by the rnanufacturer.

device malfunction

maintenance

refill oil

sharpen the saw chain

stop

transport

shutdown

6

7

8

9

10

5

Image 5
Contents Owner’s Safety Manual Packing Table of contentsThank you for your trust in our product Delivery inventory SymbolsImportant Safety Instructions Read ALL Instructions Outdoor Use Extension Cords Disconnect Chain SawStay Alert Check Damaged Parts Guard Against KickbackReplacement Parts Power SupplyUse of Extension Cord Polarized PlugsChain Saw Nomenclature Tightening the saw chain Putting Into OperationMounting the guide bar and saw chain Checking the chain tension Chain brake maintenanceChain brake HintWaste oil Saw chain oilRefilling the oil tank Holding the chain saw Switching on the motorChecking the chain brake Using the chain sawChecking the chain lubrication Felling a treeLimbing a tree Felling back cutBucking a log Carrying toolFiles and how to work with them MaintenanceSharpening the saw chain 65 mm 025 MinProtective gloves must be worn Cleaning the guide bar lubricating the sprocket noseMalfunction System Observation Cause Replacing the saw chainInspecting and replacing the carbon brushes Instructions for periodic maintenance Service, spare parts and guaranteeMaintenance and repair Spare partsGuarantee Extract from the spare parts listAccessories Included in the delivery inventorySpace for notes Technical dataNous vous remercions pour votre confiance Travaux DE MaintenanceTable de matiè res EmballageAvertissement SymbolesLivraison complè te Maintenez la zone de travail propre et rangé e Utilisez les outils convenablesTenez compte de l’environnement de travail Pré servez-vous des chocs é lectriquesVé rifiez les piè ces endommagé es Dé branchez la tronç onneuseConservez Avec Soin CES Instructions Utilisation du cordon prolongateurAlimentation é lectrique Piè ces dé taché esNomenclature des piè ces Dé taché es Montage du guide-chaîne et de la chaîne Mise EN RouteTendre la chaîne de sciage Frein de chaîne Contrô le de la tension de la chaîneEntretien du frein de chaine et du frein de ralentissement Conseil PratiqueRemplir le ré servoir d’huile Huile Usagé eHuile de chaîne Maintien de la tronç onneuse Mettre le moteur en marcheEncoche d’abattage Utilisation de la tronç onneuseRepli Longueurs d’arbreEbranchage Coupe d’abattageDé bitage Transport de l’outilLime et guidage de la lime Travaux DE MaintenanceAffû tage de la chaîne Porter impé rativement des gants de protection Nettoyer le guide-chaîne Regraisser l’é toile de dé viationVé rifier / remplacer les balais de charbon Nouvelle chaîne de sciageRecherche de pannes Voir extrait de la liste de piè ces de rechangePiè ces de rechange Instructions d’entretien et de maintenance pé riodiquesEntretien et ré parations Extrait de la liste de piè ces de rechange AccessoiresGarantie Livraison complè teRé servé e aux notes Caracté ristiques techniquesMakita U.S.A., Inc Makita Canada Inc

UC 3000, UC 3500, UC 4000 specifications

Makita, a leader in power tools, has developed a range of electric chainsaws designed for efficiency, power, and user comfort. Among these, the UC 3000, UC 3500, and UC 4000 models stand out, each offering unique features tailored to different cutting needs.

The Makita UC 3000 is an excellent choice for light to medium-duty tasks. It sports a 3000-watt motor, providing ample power for trimming branches, cutting firewood, and general garden maintenance. One of its key features is the tool-less chain tensioning system, which allows users to adjust the chain quickly and safely without the need for additional tools. The UC 3000 is equipped with an automatic chain lubrication system that ensures the chain runs smoothly and maintains optimal performance. Weighing relatively light, this model promotes user comfort and reduces fatigue during prolonged use.

Moving up in power, the Makita UC 3500 delivers a robust 3500-watt motor. This model is well-suited for more demanding jobs, such as cutting larger trees or heavy-duty landscaping tasks. The UC 3500 also features the tool-less chain tensioning system, providing an efficient and hassle-free experience. The automatic oiling mechanism continues to support the chain’s health, ensuring longevity and consistent performance. Additionally, the UC 3500 includes an ergonomic design with a comfortable grip to minimize vibrations, enhancing user control during operation and improving overall safety.

The UC 4000 takes power and performance to the next level, boasting a strong 4000-watt motor. This model is ideal for professional landscapers and those who regularly undertake heavy-duty cutting tasks. The UC 4000 combines the convenient tool-less chain tensioning system and automatic lubrication features found in its smaller counterparts but also incorporates advanced safety features such as a kickback brake. This ensures immediate chain stoppage if the chainsaw is used improperly, increasing user safety significantly. The lightweight design paired with an ergonomic handle makes this model manageable for extended periods while providing excellent balance.

In summary, the Makita UC 3000, UC 3500, and UC 4000 offer a versatile range of electric chainsaws suitable for various applications. Each model combines effective motors with user-friendly features and innovative technologies, ensuring that users can tackle cutting jobs with confidence and efficiency. Whether for casual gardening or professional landscaping, Makita's chainsaws are built to meet the demands of users at any skill level.