Makita DCS 401 manual Re Y, Makita DCS 340, DCS 341, DCS 400, DCS Contents

Page 2

WARNING !

Careless or improper use of this product can cause serious or even fatal injury.

Before operating a chain saw or other MAKITA products it is important that you read, fully understand and carefully follow the instructions outlined in this owners manual. Kickback may cause severe or fatal injury and is one of many potential dangers in operating a chain saw. Kickback and other safety related precautions are described in detail within this owners manual. Additional owners manuals are available from MAKITA USA, INC.,14930-C Northam Street, La Mirada, CA 90638-5753, Telephone: (714) 522 80 88 and MAKITA CANADA INC., 1950 Forbes Street, Whitby, Ontario, Canada, L1N 7B7, Telephone: (905) 571 22 00.

This product complies with: American National Standard Institute B 175.1-1991 chain saw safety standard.

Canadian Standards Association Z62.1-95 chain saw safety standard. Z62.3-96 chain saw kickback standard.

With the purchase of this chain saw you have chosen a German quality product. Important instructions for the assembly and operation of this saw are given in this manual. For your own safety, we ask you to read the accident prevention instructions very carefully before putting your chain saw into operation, as incorrect handling can, despite all precautions, lead to accidents. With a little care and attention you will have good service and lasting satisfaction from this first-rate product. The following industrial property rights apply: GSM MR 11414, GBM 9212059, GBM 29616652.

MAKITA DCS 340, DCS 341, DCS 400, DCS 401

 

Contents

Page

Contents

Page

Delivery inventory

3

Adjusting the carburetor

23

Symbols

3

Working in winter

24

Safety precautions

4-15

Sharpening the saw chain

24-25

Denomination of components

16

Cleaning the guide bar

25

Technical data

17

Cleaning the brake band and sprocket

26

Approved bar and chain combinations

17

Replacing the suction head

26

Mounting the guide bar, saw chain

18-19

Replacing the saw chain

26

Checking the chain tension

19

Replacing / cleaning the spark arrester screen

26

Safety chain brake

20

Cleaning the air filter

27

Fuel / Refuelling

20-21

Replacing the spark plug

27

Starting the engine

22

Instructions for periodic maintenance

28

Stopping the engine

22

Service, spare parts and guarantee

28-29

Checking the safety chain brake

23

Troubleshooting

29

Checking the chain lubrication

23

Extract from the spare parts list

30

The MAKITA DCS 340/341/400/401 will be delivered in a protective cardboard box to prevent transport damage. Cardboard is a basic raw material and is consequently reuseable or suitable for recycling (waste paper recycling).

RE Y

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Owner’s Safety Manual Makita DCS 340, DCS 341, DCS 400, DCS Contents RE YFurther SymbolsDelivery inventory SeeSafety precautions for chain saw operators Additional safety precautionsAnsi B175.1-1991 General Safety PrecautionsDiscription of symbols used on chain saws 45M6Use of the saw Proper clothingSaw Transporting the chain sawFueling Chain saw operating instructionsFeet Fueling instructionsCutting instructions Important adjustmentsWorking conditions Kickback Reactive forces during the cut, including kickbackSpeed of contact at which the cutter contacts the object Saw chain cutter sharpnessTo avoid kickback Depth gaugesTo avoid pushback Cutting techniquesPushback To avoid pull-inFelling instructions = cutting down areaPlunge-Cut Method Sectioning MethodLimbing BuckingMaintenance and Repair Maintaining and storing the sawDCS Denomination of components 13 12 Identification plate15 14 Length Technical data DCSApproved bar and chain combinations Stop Mounting the guide bar and saw chainTightening the saw chain Checking the chain tensionFuel mixture Safety chain brakeFuel / Refuelling Chain oilImportant note on bio-degradable chain oils Waste oilRefuelling Cold start Starting the engineStopping the engine Warm startSpeed Checking the safety chain brakeAdjusting the carburetor Checking the chain lubricationSharpening the saw chain 65 mm 025Working in winter MinProtective gloves must be worn Cleaning the guide bar, lubricating the sprocket noseFiles and how to work with them Multi-purpose greaseReplacing the suction head Cleaning the brake band and sprocket interiorReplacing / cleaning the spark arrester screen Replacing the saw chainCleaning the air filter Replacing the spark plugMaintenance and repair Service, spare parts and guaranteeInstructions for daily and periodic maintenance Spare parts GuaranteeTroubleshootig Malfunction System Observation CauseExtract from the spare parts list DCS 340 / DCS DCS 400 / DCSMakita DCS 340, DCS 341, DCS 400, DCS Sommaire Additiounels SymbolesEtendue de la fourniture VoirMesures de sé curité supplé mentaires Arrêtez le moteur avant de poser la tronçonneuse’utilisateur Description des symboles figurant sur les tronç onneusesMesures gé né rales de sé curité Condition physiqueUtilisation de la tronç onneuse Quels vê tements porter?La tronç onneuse Transport de la tronç onneuseInstructions de ravitaillement PiedsRavitaillement en carburant Dé marrageInstructions de coupe Ré glages importantsConditions de travail Choc de recul Kickback Les limiteurs de profondeurs Affû tage des plaquettes de coupe de la chaînePour é viter le choc de recul Pour é viter le recul Techniques de coupeLe recul Pour é viter la tractionInstructions d’abattage = zone d’abattageMé thode de sectionnement Mé thode de coupe en plongé eEbranchage Dé bitageEntretien et ré paration Entretien et stockage de la tronç onneuseDé signation des piè ces 13 12 Plaque signatique Guide 3/8 Combinaisons autorisé es de guides et de chaînesCaractéristiques techniques Longueur Ré fé renceMise EN Route Montage du rail-guide et de la chaîne de sciageStop Mé lange carburant Frein de chaîneCarburants/ravitaillement Huile de chaîne de sciageHuile Usagé e Remplissage des ré servoirsRemarque importante pour les huiles de chaîne de sciage bio Dé marrage à froid Dé marrer le moteurArrê ter le moteur RemarqueVé rifier le graissage de la chaîne Vé rifier le frein de chaîneRé glage du carburateur De sciage Marche hivernaleAffû tage de la chaîne Critè res d’affû tageLime et guidage de la lime Porter impé rativement des gants de protectionChangement / nettoyage du pare-é tincelles Remplacement de la cré pine d’aspirationNouvelle chaîne de sciage NGK Bpmr 6F ou Remplacement de bougie StopNettoyage du filtre d’air Vé rification de l’é tincelle d’allumageInstruction dentretien quotidien et pé riodique Service d’atelier, piè ces de rechange et garantieMaintenance et ré parations Recherche de pannes Piè ces de rechangeGarantie Panne Systè me Observation OrigineDCS 400 / DCS Extrait de la liste des piè ces de rechangeDCS 340 / DCS Makita U.S.A., INC Makita Canada INC

DCS 400, DCS 341, DCS 401, DCS 340 specifications

Makita has been an industry leader in power tools, consistently delivering high-performance products that meet the needs of professionals and DIY enthusiasts alike. Among their impressive lineup of tools, the Makita DCS 340, DCS 401, DCS 341, and DCS 400 chainsaws stand out for their innovation, reliability, and ease of use. Each model offers unique features that cater to different applications and requirements.

The Makita DCS 340 is designed for versatility and efficiency. Equipped with a powerful 34cc engine, it provides ample power for a variety of cutting tasks. The lightweight design enhances maneuverability, making it an excellent choice for both professionals and home users. One of the key features of the DCS 340 is its advanced anti-vibration system, which reduces fatigue during extended use. The easy-start mechanism further enhances user experience, allowing for quick and hassle-free operation.

Next in line is the DCS 401, which boasts a 40cc engine, offering elevated power for more demanding applications. This model is particularly effective for heavy-duty cutting tasks such as felling larger trees and processing timber. The DCS 401 features a chain brake for improved safety, as well as an ergonomic handle that ensures a comfortable grip and enhanced control. The automatic chain oiling system also ensures consistent lubrication for smoother operation and extends the lifespan of the saw.

The DCS 341 model is similar to the DCS 340 but offers added convenience with its 40cc engine and a slightly different configuration tailored for more intricate work. It includes a tool-less chain adjustment feature, enabling quick and easy chain tension adjustments without additional tools. This model's lightweight design is further enhanced by its compact build, making it ideal for a variety of outdoor jobs like pruning and trimming.

Lastly, the Makita DCS 400 features a robust 40cc engine as well but is specifically designed for professional-grade performance. It excels in demanding environments, thanks to its durable construction and advanced air filtration system. This model significantly reduces wear and tear and increases longevity. The DCS 400 also offers a fast idle for easier cold starts and a transparent fuel tank, allowing for quick visual checks on fuel levels.

Overall, whether you're a professional or a hobbyist, the DCS series from Makita provides reliable, powerful, and user-friendly options for all your cutting needs. Each model is designed with safety, comfort, and efficiency in mind, ensuring that you can tackle any project with confidence.
Top Page Image Contents