Hitachi CE 16SA instruction manual English

Page 5

English

(4)Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

(5)Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

(6)Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

4.Tool Use and Care

(1)Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

(2)Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

(3)Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

(4)Disconnect the plug form the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

(5)Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

(6)Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.

(7)Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

(8)Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used with another tool.

5.Service

(1)Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

(2)When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instruction may create a risk of electric shock or injury.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Advertencia AvertissementTable DES Matieres ContentsMeanings of Signal Words Important Safety InformationGeneral Safety Rules SafetyEnglish Specific Safety Rules and Symbols Preserve the power cord Operate power tools at the rated voltageNever use a tool which is defective or operating abnormally Do not wipe plastic parts with solventDouble Insulation for Safer Operation Make Them Available to Other Users Owners of this ToolName of Parts SpecificationsFunctional Description Prior to Operation Assembly and OperationApplications Adjusting the horizontal gap between the shearing blades HOW to Replace the Blade HOW to USEMaintenance of the motor Maintenance and InspectionInspecting the blade Inspecting the screwsService parts list Service and repairsStandard Accessories AccessoriesSignification DES Mots D’AVERTISSEMENT Informations Importantes DE SécuritéRegles Generale DE Securite SecuriteConserver CES Instructions Avertissement Lire et coxmprendre toutes les instructionsFrançais NE Jamais toucher les parties mobiles Regles DE Securite Specifiques ET SymbolesUtiliser l’outil motorisé à la tension nominale Garder propres les évents d’air du moteurNe pas essuyer les parties en plastique avec du solvant Faire attention au cordon d’alimentationDouble Isolation Pour UN Fonctionnement Plus SUR NOM DES Parties Description FonctionnelleAvant L’UTILISATION Réglage de l’écart horizontal entre les lames de découpe Comment Remplacer LA Lame UtilisationInspection de la lame Entretien ET InspectionInspection des vis Entretien du moteurListe des pièces de rechange Entretien et reparationAccessoires Standard AccessoiresSignificado DE LAS Palabras DE Señalización Información Importante Sobre SeguridadNormas Generales DE Seguridad SeguridadGuarde Estas Instrucciones Advertencia Lea y entienda todas las instruccionesEspañol No toque Nunca las piezas móviles Normas Y Símbolos Específicos DE SeguridadUtilice la herramienta correcta Maneje correctamente la herramientaTenga cuidado con los bordes agudos de las chapas Maneje con cuidado las herramientas eléctricasNo limpie las partes de plástico con disolvente Tenga cuidado con el cable de alimentación Aislamiento Doble Para Ofrecer UNA Operación MÁS SeguraEspañol Especificaciones Descripción FuncionalNomenclatura Antes DE LA Operación Montaje Y OperaciónAplicaciones Ajuste de la holgura horizontal entre las cuchillas Cómo Reemplazar LA Cuchilla Modo DE UtilizaciónInspección de la cuchilla Mantenimiento E InspecciónInspección de los tornillos de montaje Mantenimiento de motorLista de repuestos Mantenimiento y reparaciónAccesorios Estándar Accesorios608VVC2PS2L Hitachi Koki Canada Co

CE 16SA specifications

The Hitachi CE 16SA is a compact excavator that has garnered attention for its impressive features and capabilities in various construction and excavation tasks. This model is designed for versatility and efficiency, making it a popular choice among contractors and operators alike.

One of the standout characteristics of the Hitachi CE 16SA is its compact design. With a width of just 1,500 mm, it can easily navigate tight job sites and urban environments where space is limited. This makes it ideal for projects like landscaping, utility work, and small-scale site preparation. Despite its compact size, the CE 16SA does not compromise on performance. It is powered by a robust engine that delivers reliable horsepower, ensuring that it can handle a variety of applications effectively.

The excavator features a powerful hydraulic system, which enhances its digging capabilities. The hydraulics provide smooth and precise control, allowing operators to perform delicate tasks as well as heavy-duty excavation work. The quick attachment system enables rapid switching between different tools, such as buckets and grapples, further increasing its versatility on the job site.

Another key feature is the operator-friendly cabin, which is designed for comfort and ease of use. The CE 16SA comes equipped with ergonomic controls and an adjustable seat, allowing operators to maintain optimal positioning during long hours of work. The cabin also offers excellent visibility, promoting safety and awareness of the surrounding environment.

In terms of technology, the Hitachi CE 16SA incorporates advanced engine technology that meets strict emissions standards, ensuring a reduced environmental impact without sacrificing power and efficiency. The machine is designed for low maintenance requirements, featuring durable components that contribute to its longevity and reliability.

Safety features are also a priority in the design of the CE 16SA. The excavator includes protection measures such as a ROPS (Roll Over Protective Structure) cabin, which enhances operator safety during operation. Additionally, well-placed lights and sound alarms help ensure that the machine can be safely operated in various conditions.

Overall, the Hitachi CE 16SA combines powerful performance, advanced technology, and user-friendly features, making it an excellent choice for operators seeking a reliable and efficient compact excavator for a wide range of applications. Its blend of compactness and capability makes it a valuable asset on any construction site.
Top Page Image Contents