Ryobi P2002 Operation, Attaching Grass Deflector, To Remove Battery Pack, Telescoping Boom

Page 9

ASSEMBLY

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.

ATTACHING GRASS DEFLECTOR

See Figure 2 - 3.

WARNING:

The line cut-off blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury.

Remove supplied screws with a phillips screwdriver from the trimmer head.

Fit the grass deflector into the slots on trimmer head.

Turn counterclockwise to lock grass deflector into place.

Line up the screw holes in the grass deflector with the holes in the trimmer head.

Install supplied screws and tighten by turning clockwise with a phillips screwdriver.

OPERATION

WARNING:

Do not allow familiarity with products to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

To stop the string trimmer, release the switch trigger.

tO INSTALL BATTERY PACK

See Figure 5.

Insert the battery pack into the product as shown.

Make sure the latches on each side of the battery pack snap into place and the battery pack is secured before beginning operation.

TO REMOVE BATTERY PACK

See Figure 5.

Depress the latches on each side of the battery pack.

Remove the battery pack.

WARNING:

Never use blades, flailing devices, wire, or rope on this product. Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs.

For complete charging instructions, refer to the Operator’s Manuals for your Ryobi One+ battery pack and charger models.

NOTE: To avoid serious personal injury, always remove the battery pack and keep hands clear of the lock-out button when carrying or transporting the tool.

TELESCOPING BOOM

See Figure 6.

The boom can be extended or shortened for ease of use.

Remove the battery pack.

Loosen the telescoping boom coupler by turning it coun- terclockwise. Slide the boom to the desired position.

Tighten the coupler by turning clockwise. Make sure the boom is securely tightened before reinstalling the battery pack.

ADJUSTABLE FRONT HANDLE

See Figure 7.

The angle of the front handle can be adjusted 180°.

Remove the battery pack.

Set the trimmer on a flat surface and turn the knob coun- terclockwise to loosen the handle.

Starting/stopping the string trimmer

See Figure 4.

To start the string trimmer, push the lock-out button to either the right or left side and pull the switch trigger.

7 — English

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Save this Manual for Future Reference OPERATOR’S ManualSwitch trigger gâchette, gatillo del interruptor Position D’UTILISATION Correcte Table of Contents Read all instructions Important Safety InstructionsImportant Safety Instructions Symbol Signal Meaning SymbolsAssembly FeaturesAdjustable Front Handle To Remove Battery PackOperation Attaching Grass DeflectorCutting Tips Operating the TrimmerAdvancing String Advancing the String ManuallySpool Replacement MaintenanceGeneral Maintenance Battery Pack Removal and Preparation for RecyclingProblem Possible Cause Solution TroubleshootingLimited Warranty Statement WarrantyEnglish Instructions Importantes Concernant LA Sécurité AVERTISSEMENT Lire toutes les instructions Instructions Importantes Concernant LA Sécurité Symbole Signal Signification SymbolesAssemblage Fixation DU Déflecteur D’HERBE UtilisationMise EN Marche ET Arrêt DE LA Tondeuse À Fouet Instalación DEL PileUtilisation DE LA Tondeuse À Fouet Avance DU FIL DE CoupeConseils Avance Manuelle DU FILRemplacement DU FIL Remplacement DE LA BobineEntretien Entretien GénéralDépannage Problème Possible Cause SolutionÉnoncé DE LA Garantie Limitée GarantieFrançais Instrucciones DE Seguridad Importantes AdvertenciaLea todas las instrucciones Instrucciones DE Seguridad Importantes Peligro SímbolosPrecaución Símbolo Nombre DENOMINACIÓN/EXPLICACIÓNArmado CaracterísticasAcoplamiento DEL Deflector DE Hierba FuncionamientoEncendido Y Apagado DE LA Recortadora Instalación DEL Paquete DE BateríasRecomendaciones DE Corte Manejo DE LA RecortadoraAvance DEL Hilo Avance Manual DEL HiloAdvertencia Reemplazo DEL Carrete MantenimientoMantenimiento General Reemplazo DEL HiloLlámenos Primero Corrección DE ProblemasDeclaración DE LA Garantía Limitada GarantíaManuel D’UTILISATION / Manual DEL Operador Tondeuse À FouetRecortadora de hilo

P2002 specifications

The Ryobi P2002 is a versatile and powerful addition to any DIY enthusiast's tool collection. Powered by Ryobi's One+ battery system, this cordless drill/driver excels in delivering consistent performance for various home improvement tasks.

One of the notable features of the Ryobi P2002 is its compact and lightweight design. Weighing in at just 3.2 pounds, this drill is easy to maneuver in tight spaces, making it ideal for overhead tasks or intricate projects. Moreover, the ergonomic handle provides a comfortable grip, reducing fatigue during extended use.

The P2002 boasts a powerful motor that delivers up to 1,600 RPM, which allows users to tackle a wide range of drilling and driving applications. It also features a two-speed gearbox, enabling speed optimization—0-440 RPM for precise control during low-speed tasks and 0-1,600 RPM for high-speed drilling. This flexibility ensures that users can efficiently switch between various materials, including wood, metal, and plastic.

Additionally, the Ryobi P2002 is equipped with a ½-inch keyless chuck, allowing for quick and effortless bit changes without the hassle of manual tightening. This feature saves time and enhances convenience when switching between bits, especially during challenging projects.

The drill also includes an integrated LED work light. This feature illuminates the workspace, making it easier to see in dimly lit areas or when working at odd angles. Coupled with its adjustable torque settings, the P2002 ensures that users can drive screws and drill holes with precision, reducing the risk of stripping screws or damaging materials.

Another significant advantage of the Ryobi P2002 is its compatibility with the broader Ryobi One+ system. This means that users can interchange batteries across a range of Ryobi tools, offering versatility and efficiency in powering their entire toolset.

In summary, the Ryobi P2002 is a reliable and powerful drilling solution with an ergonomic design, variable speeds, and essential features like a keyless chuck and an LED work light. Its integration into the One+ ecosystem further enhances its practical applications for both seasoned DIYers and novice users alike, making it an excellent choice for various home improvement challenges.
Top Page Image Contents