Ryobi Comprehensive Guide to Operation and Optional Woodworking Sub-Base for P600 Trimmer
Page 14

OPERATION

OPTIONAL WOODWORKING SUB-BASE

Turn the P600 laminate trimmer into a trim router with the op- tional woodworking sub-base, Ryobi Part No. 200334001.

The woodworking sub-base accessory with handles is con- venient when routing 4 in., 5 in., or 6 in. circular grooves. It can also be used when routing grooves parallel to the edge of the workpiece or with ball-bearing piloted bits.

The handles allow you to grasp and hold the trimmer with two hands, similar to grasping and holding a router.

This trimmer is designed for roundover and other edging operations up to 3/8 in. It is also useful for rabbeting or dado operations with straight bits up to a maximum diameter of 1/4 in.

WARNING:

Do not use straight bits larger than 1/4 in. or edging bits which cut a pattern larger than 3/8 in. with this trimmer. Use of larger bits can result in loss of control and serious personal injury.

TRIMMER

HANDLE(S)

WARNING:

Always use the laminate sub-base for laminate trimming. Always use the woodworking sub-base for trim routing operations. Use of the trimmer without a sub-base or us- ing the incorrect sub-base can result in serious personal injury.

R

3

2

 

 

 

R

1

R

2

 

2

 

 

 

 

WOODWORKING

SUB-BASE

ACCESSORY

SUB-BASE

SCREW(S)

 

 

 

/

 

 

 

1

4

 

 

/

 

 

1

2

 

 

/

 

1

3

4

 

 

 

 

 

Fig. 10

WARNING:

Never install a bit larger than the opening of the trimmer base. The use of larger bits can result in loss of control and possible serious personal injury.

ATTACHING THE WOODWORKING SUB-BASE ACCESSORY AND HANDLES

See Figure 10.

nTurn the switch to OFF and remove the battery pack from the trimmer.

nTurn the trimmer upside down to remove the four sub- base screws and laminate sub-base.

nAttach the woodworking sub-base accessory using the same four screws.

nTighten the screws securely. Do not overtighten.

nTurn the trimmer upright and thread the handles provided into the threaded holes in the woodworking sub-base accessory.

nTighten the handles securely. Check often to assure the handles remain securely tightened.

ROUT CIRCULAR GROOVE CLOCKWISE

FINISHING

R

3

R

1

 

2

 

 

2

 

R

 

NAIL

 

 

2

 

 

 

 

 

 

 

 

1/4 1/2 3/4 1

WORKPIECE

Fig. 11

 

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual Save this Manual for Future ReferenceWarranty IntroductionPersonal Safety General Safety RulesElectrical Safety Work AreaSpecific Safety Rules ServiceSymbols Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Switch Motor Housing Spindle Lock Button Base FeaturesProduct Specifications WrenchAssembly INSTALLING/REMOVING Trimming Bits See Figures 2Depress Latches to Remove Battery Pack Installing the Battery PackRemoving the Battery Pack OperationRIGHT-HANDED USE LEFT-HANDED OFF Gripping the TrimmerSTARTING/STOPPING the Trimmer See Figures 7 Operating the TrimmerDirection of Feed and Thrust Setting Depth of CUT Depth CUT ScaleAttaching the Woodworking SUB-BASE Accessory and Handles Optional Woodworking SUB-BASESee Figures 12 Routing Grooves in a CircleRouting Grooves Parallel to AN Edge Rout Groove from Right to LeftTOO Slow Feeding Proper Rate of FeedForce Feeding TOO Slow TOO Fast1ST. Pass Depth of CUTDepth Width CUT Battery Pack Removal and Preparation for Recycling MaintenanceGeneral Maintenance BatteriesAccessories Service Model NO. and Serial no Manuel D’UTILISATION Conserver CE Manuel Pour Future RéférenceGarantie Table DES MatièresRègles DE Sécurité Générales Règles DE Sécurité Particulières DépannageSymboles Symbole NOM Désignation / ExplicationAvertissement Symbole Signal SignificationAVERTISSEMENT  CLÉ CaractéristiquesFiche Technique Semelle Pour LaminésAssemblage Serrage Installation / Retrait DES Fers À RognerVoir les figures 2 et Retrait DU Bloc DE BATTERIES  Installation DU Bloc DE BATTERIES Utilisation Utilisation À Main Droite Main Gauche Arrêt Marche Tenue DE LA RogneuseMise EN Marche ET Arrêt Direction DU FER Utilisation DE LA Rogneuse’ENGAGEMENT Direction ’ENGAGEMENT Guide À L’EXTÉRIEUR PousséeRéglage DE LA Profondeur DE Coupe Installation DE LA Semelle À Bois ET DES Poignées Semelle Pour Bois EN OptionVoir les figures 12 et Toupillage DE Rainures CirculairesToupillage DE Rainures Parallèles AU Bord D’UNE Pièce Toupiller DE Droite À GaucheAvance Trop Lente Vitesse D’ENGAGEMENT CorrecteAvance Forcée Trop Lente Trop RapideProfondeur DE Coupe 1ÈRE PasseAvertissement AVERTISSEMENT  EntretienEntretien Général Retrait ET Préparation DU Batteries Pour LE RecyclageAccessoires Réparation NO. DE Modèle ET NO. DE Série Manual DEL Operador Guarde Este Manual Para Futuras ConsultasGarantía Índice DE ContenidoIntroducción Seguridad Eléctrica Reglas DE Seguridad Generales¡ADVERTENCIA Seguridad PersonalReglas DE Seguridad Específicas ServicioSímbolos Símbolo Nombre DENOMINACIÓN/EXPLICACIÓNPrecaución PeligroAdvertencia Servicio AdvertenciaLlave CaracterísticasEspecificaciones DEL Producto Subbase Para LaminadosArmado Ranura DE Tope Montaje Y Desmontaje DE LAS Fresas DE RecortarVea las figuras 2 y Laminados Pestillo DE Ajuste DE Profundidad FresaFuncionamiento USO CON LA Mano Derecha Mano Izquierda Apagado Encendido Sujeción DE LA RecortadoraEncendido Y Apagado DE LA Recortadora Vea las figuras 7 y Utilización DE LA RecortadoraDirección DE Avance Y Empuje Indicadoras Ajuste DE LA Profundidad DE CorteMarcas Escala DE Profundidad DE Corte Pestillo DE Ajuste DE Tornillos DE LA Subbase Subbase Optativa Para CarpinteríaRecortadora Mangos Pieza DE TrabajoVea las figuras 12 y Fresado DE Ranuras EN CírculoFresado DE Ranuras Paralelas a UN Canto Frese LA Ranura Avanzando DE Derecha a IzquierdaAvance Demasiado Lento Velocidad DE Avance CorrectaAvance Forzado Demasiado Lento Demasiado RápidoDEL Corte Profundidad DEL CorteDEL Corte Anchura PasadaAdvertencia Advertencia MantenimientoMantenimiento General BateríasAccesorios Notas Notas Servicio NÚM. DE Modelo Y NÚM. DE Serie Advertencia
Related manuals
Manual 4 pages 7.95 Kb

P600 specifications

The Ryobi P600 is a dynamic and versatile power tool that has gained popularity among DIY enthusiasts and professionals for its innovative features and robust performance. This 18V cordless electric blower is designed for efficiency, making yard maintenance a breeze.

One of the standout features of the Ryobi P600 is its lightweight and compact design, which allows users to maneuver and operate the blower with ease. Weighing just under 5.5 pounds, it reduces fatigue during extended use, making it ideal for clearing leaves, grass clippings, and debris from driveways, sidewalks, and patios.

Equipped with a powerful motor, the P600 delivers impressive air speeds of up to 140 miles per hour. This ensures effective clearing, even in challenging conditions such as wet leaves. Its variable speed control allows users to adjust the blower's power output according to the specific task at hand, providing both precision and versatility.

The Ryobi P600 showcases advanced technology with its compatibility with the Ryobi 18V ONE+ system. This platform enables users to use the same battery across a vast range of Ryobi tools, reducing the need for multiple batteries and chargers. This not only saves money but also promotes convenience, as users can seamlessly switch between tools without downtime.

Another notable feature is its easy-to-use design which includes a comfortable grip and a user-friendly trigger. The lightweight body coupled with the ergonomic handle ensures a secure hold, making it easy to operate for extended periods without discomfort. The P600 also includes a built-in hanging hook for convenient storage when not in use.

Additionally, this blower operates quietly compared to gas-powered alternatives, making it a more neighborhood-friendly option. This design consideration reduces noise pollution while still providing the performance necessary for effective outdoor cleaning tasks.

In summary, the Ryobi P600 is a robust, efficient, and user-friendly electric blower that combines power and convenience. Its lightweight design, impressive air speed, and compatibility with the Ryobi 18V ONE+ battery system make it an excellent choice for homeowners and professionals alike. With innovative features and reliable performance, the P600 will undoubtedly enhance outdoor maintenance tasks while providing a comfortable experience for users.
Top Page Image Contents