Craftsman 104.79211, 104.79212 USE the Correct Propane Canister, Attaching the Propane Canister

Page 8

WARNING:

Propane is highly flamable, and its vapors

can explode if ignited.

Take the following precautions.

USE THE CORRECT PROPANE CANISTER

Always use Propane canisters or "Bottles" that are the correct size. The 17 ounce or 16.4 ounce canisters that

are approximately 3-7/8 inch in diameter are the cor - rect canisters (Fig.8). Do not use the smaller diameter canisters as they will not latch securely to the unit and vibration may cause damage to the trimmer and poten-

tially result in a dangerous leak.

 

16.4 OZ. / 465 g

Fig. 8

CANISTER

ATTACHING THE PROPANE CANISTER

1.Make sure the engine is off.

2.If the propane canister to be installed has a protec- tive plastic cap over the threaded end, remove it. Make sure the canister clamp is in the un-latched position.

3.Insert the threaded end of the propane canister into

the clamp as far as it will go (Fig. 9A). Insert the propane con- nector onto the threaded end of the canister and screw it

onto threads clockwise (Fig. 9B). Screw it until snug. Do not over tighten. It may be normal to hear or smell a slight momentary leak of propane as the connector is being screwed in. Make sure that the connector is installed tight enough that any leakage stops. Hand tight is sufficient. Slide canister back so all of fuel line components are behind the guard and latch the canister clamp.

Propane

Connector

Fig. 9B

REMOVING THE PROPANE CANISTER

I. Make sure the engine is off.

2.Un-latch the bottle clamp and push canister against the guard exposing the propnae connector. Remove the propane connector by turning it counterclockwise.

3.Remove the empty canister.

4.Dispose of empty propane canisters in accordance to Federal, State and local Regulations.

WARNING:

Never attempt to force a connector onto a propane canister that has improper or damaged threads.

WARNING:

This container and by-products of

the combustion of its contents contain chemicals known to the state of California to cause cancer, birth deflects, or other reproductive harm.

WARNING:

Extrememly flamable fire/explosion.

Hazard contents under pressure.

Carbon monoxide hazard.

WARNING:

Propane is extremely flamable. Vapor may explode. Always stop the engine and allow it to cool before replacing the propane canister. Do not smoke. Keep sparks and open flames at a distance from the area.

Fig. 9A

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operators Manual Table of Contents Other Safety Warnings Safety & International Symbols On / Offstopcontrolon / START/RUNInstalling Cutting Attachment Shield Installing the Upper Handle and Safety BARTool KIT For Curved Shaft TrimmersRecomended OIL Type Adding OIL to the Crankcase Initial USECarbon Monoxide Hazard Handling & StorageBefore USE During USERemoving the Propane Canister USE the Correct Propane CanisterAttaching the Propane Canister Installing Cutting Attachments Available Cutting AttachmentsEdging Position Removing Cutting AttachmentsStarting Instructions Stopping InstructionsOperating Your Trimmer Holding the Trimmer Tips for Besttrimming ResultsChecking the OIL Level Cleaning the AIR Filter Changing the OILCarburetor Adjustment Clean AIR FilterAdjust Idle Speed Screw Replacing the Spark PlugLine Replacement Rocker ARM Clearance Adjustment If the Clearance is not Within SpecificationCleaning StorageLong Term Storage TransportationEnginetype AIR-COOLED 4-CYCLE Displacement Throttle Safety Lock with Manual Spring ReturnClutch Type Centrifugal Operating R.P.M Idle SpeedCraftsman Full Warranty Repair ProtectionMY-HOME

104.79212, 104.79211 specifications

The Craftsman 104.79211 and 104.79212 are two notable products in the Craftsman tool lineup, designed to meet the needs of both professional tradespeople and DIY enthusiasts. These models reflect Craftsman's commitment to quality, durability, and innovative technology in their tool manufacturing.

One of the main features of the Craftsman 104.79211 is its robust construction. Made from high-grade materials, this model is built to withstand rigorous use without compromising performance. The design includes an ergonomic handle, ensuring users can maintain comfort during prolonged use, which reduces fatigue and enhances productivity. This feature makes it particularly useful for tasks that require precision and extended focus.

The Craftsman 104.79212 follows suit with similar durability features while incorporating advanced technology that elevates its functionality. This model boasts an integrated measurement system, allowing users to achieve greater accuracy in their work. The easy-to-read scale helps avoid miscalculations and ensures a professional finish every time.

Both models come equipped with a quick-release mechanism, which allows for easy adjustment and interchangeability of attachments. This is particularly beneficial for users who require versatile tools for various applications. The ability to switch between different attachments on the fly saves time and increases efficiency on the job site.

Another standout feature of these models is their compatibility with the Craftsman tool ecosystem. Users can easily integrate them into their existing tool collection, enhancing the overall versatility of their toolkit. This seamless compatibility means that tradespeople can count on dependable performance across multiple projects.

In terms of safety, both the 104.79211 and 104.79212 models incorporate safety features designed to protect users during operation. This gives peace of mind while working on different tasks.

Overall, the Craftsman 104.79211 and 104.79212 embody a perfect blend of reliability, user-friendly design, and advanced features. Whether you are a seasoned professional or a novice, these tools provide exceptional performance for a wide range of tasks, reinforcing Craftsman's reputation as a leader in the tool industry. With their focus on innovation and user comfort, these models are a worthwhile addition for anyone looking to enhance their tool collection.
Top Page Image Contents