Craftsman 104.79211, 104.79212 warranty Starting Instructions, Stopping Instructions

Page 10

STARTING INSTRUCTIONS

1.Check the oil level in the crankcase. Refer to Checking the Oil Level ( p.] 2).

2.Turn switch to ON position (Fig.] 4).

NOTE: If your unit is equipped with a spring loaded type ON/OFF switch, it will always remain in the ON position.

3.Place trimmer firmly on the ground or a very sturdy work surface. Make sure cutting head is clear of all objects. Make sure all bystanders are a minimum of 50 feet (15m) away. Do not attempt to start near pilot lights or any open flame. Do not smoke. Grasp the starter rope handle with one hand and the handle pole with the other hand ( Fig.] 3).

Fig. 13

4.With the unit in the starting position, do not squeeze the throttle control (Fig.] 4). Then pull the rope smoothly and briskly. The engine should start. A cold engine should start with 3-5 pulls. A warm engine should start on the first pull.

NOTE: On the very first use, it may take extra pulls to fill the fuel system with propane.

5.Squeeze the throttle control slightly to warm up the engine for 15 to 30 seconds. In cold weather, move the throttle slowly until the engine warms up for 30 to 60 seconds.

NOTE: This unit is provided with a Fast Idle Lock (Fig. 14). If experiencing starting difficulties under regular conditions, squeeze the throttle control, then push and hold the Fast Idle lock forward while releasing the throttle trigger. Then start the unit.

Start/On(I)

Fast Idle

Stop/OffLock

Safety trigger

Throttle Control

Fig. 14

NOTE: When starting the engine in very hot or cold conditions it may be necessary to squeeze the throttle control while pulling the starter rope.

STOPPING INSTRUCTIONS

1.Release your hand from the throttle control. Allow the engine to cool down by idling.

2.If your unit is equipped with a spring loaded ON/ OFF switch, press and hold the button on OFF until the unit stops. Otherwise, push the switch to the off position.

3.When done using the trimmer for the day, disconnect the propane canister from the unit.

WARNING:

Avoid accidental starting. Make sure you are in the starting position when pulling the starter rope (Fig. 13). To avoid serious injury, the operator and unit must be in a stable

position while starting. Make sure that any add-on item is installed correctly and secure before starting the unit.

WARNING:

Always wear eye, hearing, foot and body

protection to reduce the risk of injury when

operating this unit.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operators Manual Table of Contents Other Safety Warnings Safety & International Symbols On / Offstopcontrolon / START/RUNTool KIT Installing Cutting Attachment ShieldInstalling the Upper Handle and Safety BAR For Curved Shaft TrimmersRecomended OIL Type Adding OIL to the Crankcase Initial USEBefore USE Carbon Monoxide HazardHandling & Storage During USEAttaching the Propane Canister USE the Correct Propane CanisterRemoving the Propane Canister Edging Position Installing Cutting AttachmentsAvailable Cutting Attachments Removing Cutting AttachmentsStarting Instructions Stopping InstructionsOperating Your Trimmer Holding the Trimmer Tips for Besttrimming ResultsChecking the OIL Level Cleaning the AIR Filter Changing the OILAdjust Idle Speed Screw Carburetor AdjustmentClean AIR Filter Replacing the Spark PlugLine Replacement Rocker ARM Clearance Adjustment If the Clearance is not Within SpecificationLong Term Storage CleaningStorage TransportationClutch Type Centrifugal Operating R.P.M Enginetype AIR-COOLED 4-CYCLE DisplacementThrottle Safety Lock with Manual Spring Return Idle SpeedCraftsman Full Warranty Repair ProtectionMY-HOME

104.79212, 104.79211 specifications

The Craftsman 104.79211 and 104.79212 are two notable products in the Craftsman tool lineup, designed to meet the needs of both professional tradespeople and DIY enthusiasts. These models reflect Craftsman's commitment to quality, durability, and innovative technology in their tool manufacturing.

One of the main features of the Craftsman 104.79211 is its robust construction. Made from high-grade materials, this model is built to withstand rigorous use without compromising performance. The design includes an ergonomic handle, ensuring users can maintain comfort during prolonged use, which reduces fatigue and enhances productivity. This feature makes it particularly useful for tasks that require precision and extended focus.

The Craftsman 104.79212 follows suit with similar durability features while incorporating advanced technology that elevates its functionality. This model boasts an integrated measurement system, allowing users to achieve greater accuracy in their work. The easy-to-read scale helps avoid miscalculations and ensures a professional finish every time.

Both models come equipped with a quick-release mechanism, which allows for easy adjustment and interchangeability of attachments. This is particularly beneficial for users who require versatile tools for various applications. The ability to switch between different attachments on the fly saves time and increases efficiency on the job site.

Another standout feature of these models is their compatibility with the Craftsman tool ecosystem. Users can easily integrate them into their existing tool collection, enhancing the overall versatility of their toolkit. This seamless compatibility means that tradespeople can count on dependable performance across multiple projects.

In terms of safety, both the 104.79211 and 104.79212 models incorporate safety features designed to protect users during operation. This gives peace of mind while working on different tasks.

Overall, the Craftsman 104.79211 and 104.79212 embody a perfect blend of reliability, user-friendly design, and advanced features. Whether you are a seasoned professional or a novice, these tools provide exceptional performance for a wide range of tasks, reinforcing Craftsman's reputation as a leader in the tool industry. With their focus on innovation and user comfort, these models are a worthwhile addition for anyone looking to enhance their tool collection.
Top Page Image Contents