Craftsman 104.79212, 104.79211 Available Cutting Attachments, Installing Cutting Attachments

Page 9

AVAILABLE

CUTTING

ATTACHMENTS

Brushcutter

attachment

..................................................358 79244

Edger attachment

358 79240

Cultivator attachment

358 79241

Blower attachment

358 79242

Pruner attachment

358 79245

INSTALLING CUTTING ATTACHMENTS

Your unit is provided with the Hassle-Free TM Cutting Head attachment shaft.

NOTE: Place the unit on the ground or on awork bench to make accessory installation or removal easier.

1.Turn knob counterclockwise to loosen (Fig.10).

2.While firmly holding the attachment shaft, push it straight into the attachment coupler (Fig.10).

NOTE: Aligning the release button with receiving hole will help installation (Fig.10).

Line up )arts

Attachment

Coupler

Release Button

Receiving Hole

 

 

f

 

Knob

Attachment

Upper Shaft

Shaft

 

Housing

 

 

 

 

Fig. 10

3.Turn the knob clockwise to tighten (Fig. 11). The unit is ready to use.

NOTE:

•Lock the release button in the receiving hole and securely tighten the knob before operating this unit.

•Except for edging, attachments are to be used in the receiving hole only. Using the wrong hole could lead to personal injury or damage to the unit.

•Always install the attachment so that the engine is upright (propane tank on bottom) when unit is oper- ated. A secondary receiving hole is provided for use of a trimmer being used for edging only. No other acces- sory should be used in this secondary hole (90° edging hole) ( Fig.11).

EDGING POSITION

For edging, lock the release button of the cutting attachment into the 90° edging hole (Fig.11), so that the engine remains in the upright position while operating.

90 ° Edging

Hole

Fig. 11

REMOVING CUTTING ATTACHMENTS

1.Turn the knob counterclockwise to loosen (Fig.12).

2.Press and hold the release button (Fig.12).

3.While firmly holding the upper shaft housing, pull the cutting attachment or add-on straight out of the coupler (Fig.12).

Coupler

Release Button

Fig. 12

WARNING:

To avoid serious injury and damage to the unit,

shut off the unit before removing or installing attachments.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operators Manual Table of Contents Other Safety Warnings On / Offstopcontrolon / START/RUN Safety & International SymbolsInstalling the Upper Handle and Safety BAR Installing Cutting Attachment ShieldTool KIT For Curved Shaft TrimmersAdding OIL to the Crankcase Initial USE Recomended OIL TypeHandling & Storage Carbon Monoxide HazardBefore USE During USEUSE the Correct Propane Canister Attaching the Propane CanisterRemoving the Propane Canister Available Cutting Attachments Installing Cutting AttachmentsEdging Position Removing Cutting AttachmentsStopping Instructions Starting InstructionsHolding the Trimmer Tips for Besttrimming Results Operating Your TrimmerChecking the OIL Level Changing the OIL Cleaning the AIR FilterClean AIR Filter Carburetor AdjustmentAdjust Idle Speed Screw Replacing the Spark PlugLine Replacement If the Clearance is not Within Specification Rocker ARM Clearance AdjustmentStorage CleaningLong Term Storage TransportationThrottle Safety Lock with Manual Spring Return Enginetype AIR-COOLED 4-CYCLE DisplacementClutch Type Centrifugal Operating R.P.M Idle SpeedRepair Protection Craftsman Full WarrantyMY-HOME

104.79212, 104.79211 specifications

The Craftsman 104.79211 and 104.79212 are two notable products in the Craftsman tool lineup, designed to meet the needs of both professional tradespeople and DIY enthusiasts. These models reflect Craftsman's commitment to quality, durability, and innovative technology in their tool manufacturing.

One of the main features of the Craftsman 104.79211 is its robust construction. Made from high-grade materials, this model is built to withstand rigorous use without compromising performance. The design includes an ergonomic handle, ensuring users can maintain comfort during prolonged use, which reduces fatigue and enhances productivity. This feature makes it particularly useful for tasks that require precision and extended focus.

The Craftsman 104.79212 follows suit with similar durability features while incorporating advanced technology that elevates its functionality. This model boasts an integrated measurement system, allowing users to achieve greater accuracy in their work. The easy-to-read scale helps avoid miscalculations and ensures a professional finish every time.

Both models come equipped with a quick-release mechanism, which allows for easy adjustment and interchangeability of attachments. This is particularly beneficial for users who require versatile tools for various applications. The ability to switch between different attachments on the fly saves time and increases efficiency on the job site.

Another standout feature of these models is their compatibility with the Craftsman tool ecosystem. Users can easily integrate them into their existing tool collection, enhancing the overall versatility of their toolkit. This seamless compatibility means that tradespeople can count on dependable performance across multiple projects.

In terms of safety, both the 104.79211 and 104.79212 models incorporate safety features designed to protect users during operation. This gives peace of mind while working on different tasks.

Overall, the Craftsman 104.79211 and 104.79212 embody a perfect blend of reliability, user-friendly design, and advanced features. Whether you are a seasoned professional or a novice, these tools provide exceptional performance for a wide range of tasks, reinforcing Craftsman's reputation as a leader in the tool industry. With their focus on innovation and user comfort, these models are a worthwhile addition for anyone looking to enhance their tool collection.
Top Page Image Contents