Craftsman 104.79212, 104.79211 Cleaning, Long Term Storage, Transportation, Cause Action

Page 17

CLEANING

Use a small brush to clean the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and sol - vents such as kerosene, can damage plastic housing or handle. Wipe offany moisture with soft cloth.

STORAGE

•Remove propane canister.

•Never store the unit with attached propane canister where fumes may reach an open flame or spark.

•Allow the engine to cool before storing.

•Lock up the unit to prevent unauthorized use or damage.

•Store the unit in a dry, well-ventilated area.

•Store unit out of reach of cMdren.

WARNING:

To avoid serious injury, always turn

your off and allow it to cool before

you service it.

LONG TERM STORAGE

1.Remove propane canister.

2.Allow the engine to cool. Remove the spark plug and put 5 drops of high quality motor oil into the cylinder. Pull the starter rope slowly to distribute the oil. Rein - stall the spark plug.

NOTE: Remove the spark plug and drain all of the oil from the cylinder before attempting to start the trimmer after storage.

3.Change the oil, referring to Changing the Oil (p.13). Dispose of the old oil in accordance to Federal, State and Local regulations.

4.Thoroughly clean the unit and inspect for any loose or damaged parts. Repair or replace damaged parts and tighten loose screws, nuts or bolts. The unit is ready for storage.

TRANSPORTATION

•Allow the engine to cool before transporting.

•Secure the unit while transporting.

•Remove propane canister.

TROUBLESHOOTING

CAUSE

 

 

ACTION

 

Bad spark plug

 

Replace the spark plug

CAUSE

 

 

ACTION

 

Air filter

iSplugged

 

Replace or clean the air filter

Improper

carburetor

adjustment

Adjust according

to the carburetor

 

 

 

adjustment section or take to a Sears or

 

 

 

other qualified service dealer for an adjustment

ENGINE WILL NOT ACCELERATE

 

 

CAUSE

 

 

ACTION

 

Cutting

attachment

bound with grass

stop the engine

&clean the cutting attachment

Dirty air filter

 

Clean or replace

the air filter

ENGINE_¢KS POWERORSTAL_ WHENCUING

 

 

CAUSE

 

 

ACTION

 

IF FURTHER ASSISTANCE IS REQUIRED, CONTACT A SEARS OR OTHER QUALIFIED SERVICE DEALER.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operators Manual Table of Contents Other Safety Warnings On / Offstopcontrolon / START/RUN Safety & International SymbolsInstalling the Upper Handle and Safety BAR Installing Cutting Attachment ShieldTool KIT For Curved Shaft TrimmersAdding OIL to the Crankcase Initial USE Recomended OIL TypeHandling & Storage Carbon Monoxide HazardBefore USE During USERemoving the Propane Canister USE the Correct Propane CanisterAttaching the Propane Canister Available Cutting Attachments Installing Cutting AttachmentsEdging Position Removing Cutting AttachmentsStopping Instructions Starting InstructionsHolding the Trimmer Tips for Besttrimming Results Operating Your TrimmerChecking the OIL Level Changing the OIL Cleaning the AIR FilterClean AIR Filter Carburetor AdjustmentAdjust Idle Speed Screw Replacing the Spark PlugLine Replacement If the Clearance is not Within Specification Rocker ARM Clearance AdjustmentStorage CleaningLong Term Storage TransportationThrottle Safety Lock with Manual Spring Return Enginetype AIR-COOLED 4-CYCLE DisplacementClutch Type Centrifugal Operating R.P.M Idle SpeedRepair Protection Craftsman Full WarrantyMY-HOME

104.79212, 104.79211 specifications

The Craftsman 104.79211 and 104.79212 are two notable products in the Craftsman tool lineup, designed to meet the needs of both professional tradespeople and DIY enthusiasts. These models reflect Craftsman's commitment to quality, durability, and innovative technology in their tool manufacturing.

One of the main features of the Craftsman 104.79211 is its robust construction. Made from high-grade materials, this model is built to withstand rigorous use without compromising performance. The design includes an ergonomic handle, ensuring users can maintain comfort during prolonged use, which reduces fatigue and enhances productivity. This feature makes it particularly useful for tasks that require precision and extended focus.

The Craftsman 104.79212 follows suit with similar durability features while incorporating advanced technology that elevates its functionality. This model boasts an integrated measurement system, allowing users to achieve greater accuracy in their work. The easy-to-read scale helps avoid miscalculations and ensures a professional finish every time.

Both models come equipped with a quick-release mechanism, which allows for easy adjustment and interchangeability of attachments. This is particularly beneficial for users who require versatile tools for various applications. The ability to switch between different attachments on the fly saves time and increases efficiency on the job site.

Another standout feature of these models is their compatibility with the Craftsman tool ecosystem. Users can easily integrate them into their existing tool collection, enhancing the overall versatility of their toolkit. This seamless compatibility means that tradespeople can count on dependable performance across multiple projects.

In terms of safety, both the 104.79211 and 104.79212 models incorporate safety features designed to protect users during operation. This gives peace of mind while working on different tasks.

Overall, the Craftsman 104.79211 and 104.79212 embody a perfect blend of reliability, user-friendly design, and advanced features. Whether you are a seasoned professional or a novice, these tools provide exceptional performance for a wide range of tasks, reinforcing Craftsman's reputation as a leader in the tool industry. With their focus on innovation and user comfort, these models are a worthwhile addition for anyone looking to enhance their tool collection.
Top Page Image Contents