Craftsman 104.79212, 104.79211 warranty Changing the OIL, Cleaning the AIR Filter

Page 13

CHANGING THE OIL

For a new engine, change the oil after the first 10 hours of operation. Change the oil while the engine is still warm but not hot. The oil will flow freely and carry away more impurities.

1.Unplug spark plug wire to prevent accidental starting.

2.Remove the oil fill plug/dipstick.

3.Pour the oil out of the oil fill hole and into a container by tipping the unit to its side (Fig. 18). Allow ample time for complete drainage.

Fig. 18

NOTE: Wear gloves to prevent injury when handling the unit.

4.Wipe up any oil residue on the unit and clean up any oil that may have spilled. Dispose of the oil according to Federal, State and local regulations.

5.Refill the crankcase with 2.5 fluid oz. (75 mL) of SAE 10W-30 SF,SG,or SH oil.

NOTE: Use the bottle saved from initial use to measure the correct amount of oil. The bottle measures approximately 2.5 fluid oz. (75 mL) (Fig. 16).

Check the level with the dipstick. If the level is low, add a small amount ofoil and recheck. Do not overfill

(Fig. 17).

6. Replace the oil fill plug/dipstick.

"k

7. Reconnect the spark plug boot.

 

4-Cycle Motor Oil J

 

I

 

Fig. 19

CLEANING THE AIR FILTER

Clean and re-oil the air filter every 10 hours of operation. It is an important item to maintain. Failure to maintain your air filter properly can result in poor performance or can cause permanent damage to your engine.

1.Remove the phillips head screw in the air filter cover. Then pull the air filter cover out and upwards (Fig.20).

2.Remove the air filter (Fig. 20).

Air Filter

Air Filter

Cover _._

Screw

Air Filter

Base Plate

Fig. 20

3.Wash the filter in detergent and water. Rinse the filter thoroughly and allow it to dry.

4.Apply enough clean SAE 10W-30 motor oil to lightly coat the filter.

5.Squeeze the filter and remove excess oil.

6.Replace the filter.

NOTE: If the unit is operated without the air filter, you will VOID the warranty.

7.Reinstall the air filter cover. Position the hooks on the

top of the air filter base plate into the slots at the top of the filter cover.

8.Swing the cover until the air filter cover snaps into place and replace the screw.

WARNING:

To avoid serious personal injury, be sure

to turn the unit off before servicing it.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operators Manual Table of Contents Other Safety Warnings On / Offstopcontrolon / START/RUN Safety & International SymbolsInstalling the Upper Handle and Safety BAR Installing Cutting Attachment ShieldTool KIT For Curved Shaft TrimmersAdding OIL to the Crankcase Initial USE Recomended OIL TypeHandling & Storage Carbon Monoxide HazardBefore USE During USEAttaching the Propane Canister USE the Correct Propane CanisterRemoving the Propane Canister Available Cutting Attachments Installing Cutting AttachmentsEdging Position Removing Cutting AttachmentsStopping Instructions Starting InstructionsHolding the Trimmer Tips for Besttrimming Results Operating Your TrimmerChecking the OIL Level Changing the OIL Cleaning the AIR FilterClean AIR Filter Carburetor AdjustmentAdjust Idle Speed Screw Replacing the Spark PlugLine Replacement If the Clearance is not Within Specification Rocker ARM Clearance AdjustmentStorage CleaningLong Term Storage TransportationThrottle Safety Lock with Manual Spring Return Enginetype AIR-COOLED 4-CYCLE DisplacementClutch Type Centrifugal Operating R.P.M Idle SpeedRepair Protection Craftsman Full WarrantyMY-HOME

104.79212, 104.79211 specifications

The Craftsman 104.79211 and 104.79212 are two notable products in the Craftsman tool lineup, designed to meet the needs of both professional tradespeople and DIY enthusiasts. These models reflect Craftsman's commitment to quality, durability, and innovative technology in their tool manufacturing.

One of the main features of the Craftsman 104.79211 is its robust construction. Made from high-grade materials, this model is built to withstand rigorous use without compromising performance. The design includes an ergonomic handle, ensuring users can maintain comfort during prolonged use, which reduces fatigue and enhances productivity. This feature makes it particularly useful for tasks that require precision and extended focus.

The Craftsman 104.79212 follows suit with similar durability features while incorporating advanced technology that elevates its functionality. This model boasts an integrated measurement system, allowing users to achieve greater accuracy in their work. The easy-to-read scale helps avoid miscalculations and ensures a professional finish every time.

Both models come equipped with a quick-release mechanism, which allows for easy adjustment and interchangeability of attachments. This is particularly beneficial for users who require versatile tools for various applications. The ability to switch between different attachments on the fly saves time and increases efficiency on the job site.

Another standout feature of these models is their compatibility with the Craftsman tool ecosystem. Users can easily integrate them into their existing tool collection, enhancing the overall versatility of their toolkit. This seamless compatibility means that tradespeople can count on dependable performance across multiple projects.

In terms of safety, both the 104.79211 and 104.79212 models incorporate safety features designed to protect users during operation. This gives peace of mind while working on different tasks.

Overall, the Craftsman 104.79211 and 104.79212 embody a perfect blend of reliability, user-friendly design, and advanced features. Whether you are a seasoned professional or a novice, these tools provide exceptional performance for a wide range of tasks, reinforcing Craftsman's reputation as a leader in the tool industry. With their focus on innovation and user comfort, these models are a worthwhile addition for anyone looking to enhance their tool collection.
Top Page Image Contents