Carbon Monoxide Hazard, Handling & Storage

SAFETY WARNINGS FOR PROPANE UNITS NOTE: Use propane only in containers specifically designed and approved for this unit. Propane is a combustible gas; it is colorless and thus invisible to the naked eye. Propane has a harmless odorant added so that it is possible to smell it. The propane odorant makes the propane smell like sulfer or rotten eggs.

If at any time the smell of propane is identified,

turn offthe engine. If the leak persists, remove the pro - pane canister. Never attempt to operate a unit that has a suspected leak. Always remove the propane canister from any unit that has a suspected leak.

CARBON MONOXIDE HAZARD

Burning propane makes Carbon Monoxide (CO). CO is invisible, has no smell and can kill you. Operating your trimmer in an enclosed area can be dangerous.

I. Use only in well ventilated areas. If you experience headache, drowsiness, or nausea, turn unit offand get fresh air quickly.

2.Never use where people are sleeping.

3.Follow unit instructions for proper use.

HANDLING & STORAGE

1.Keep out of reach of children.

2.Never expose cylinder to heat, sparks, or flame. Never leave in direct sunlight. Never store at tern - peratures above 120 degrees (49 degrees C).

3.Never store in living spaces.

4.Always use cylinder until it is completely empty.

5.Never refill a disposable cylinder. Refilling may cause an explosion. Federal law forbids transportation if re - filled, imposes a penalty up to $500,000, and 5 years imprisonment (49 U.S.C.5124).

6.Never put in luggage or take on trains or aircraft.

7.To discard, contact local refuse hauler or recycle center. Never put in fire or incinerator. Do not puncture. If your cylinder was purchased with a "Green Key" _ or similar device, install it when empty and cylinder may be recycled with other steel items.

NOTE: FIRE/EXPLOSION HAZARD

Contains enough gas to cause serious fire, explosion, and burns. To reduce chance of leak, fire, or explosion:

BEFORE USE

1.Check propane cylinder and trimmer seals. Never use with damaged or missing seals. Discard cylinder if dirt or rust particles are in valve area.

2.Turn trimmer off.

3.Attach cylinder outdoors away from pilot lights, flames, sparks or other ignition sources. These sources can ignite leaking gas.

4.Hand tighten only. Never use tools to tighten. Over- tightening can damage seals.

5.Check for leaks. Put soapy water on connections.

Look for bubbles. Listen for hiss of escaping gas. Feel for extreme cold. Smell for rotten egg odor. Do not use if leaking.

6.Read and follow trimmer instructions.

DURING USE

Never use near pilot lights, flames, sparks, or other ignition sources. They can ignite leaking gas.

AFTER USE

1.Turn trimmer offand let cool.

2.Detach cylinder when not in use.

3.Detach outdoors away from pilot lights, flames, sparks, or other ignition sources;they can ignite leaking gas.

4.Replace cylinder cap to keep valve clean.

IN CASE OF FIRE

1.Leave area quickly and call 911 or your local fire depart- ment for help.

2.Let fire burn out.

Green Key- is a trademark of The Coleman Company, Inc.

104.79212, 104.79211 specifications

The Craftsman 104.79211 and 104.79212 are two notable products in the Craftsman tool lineup, designed to meet the needs of both professional tradespeople and DIY enthusiasts. These models reflect Craftsman's commitment to quality, durability, and innovative technology in their tool manufacturing.

One of the main features of the Craftsman 104.79211 is its robust construction. Made from high-grade materials, this model is built to withstand rigorous use without compromising performance. The design includes an ergonomic handle, ensuring users can maintain comfort during prolonged use, which reduces fatigue and enhances productivity. This feature makes it particularly useful for tasks that require precision and extended focus.

The Craftsman 104.79212 follows suit with similar durability features while incorporating advanced technology that elevates its functionality. This model boasts an integrated measurement system, allowing users to achieve greater accuracy in their work. The easy-to-read scale helps avoid miscalculations and ensures a professional finish every time.

Both models come equipped with a quick-release mechanism, which allows for easy adjustment and interchangeability of attachments. This is particularly beneficial for users who require versatile tools for various applications. The ability to switch between different attachments on the fly saves time and increases efficiency on the job site.

Another standout feature of these models is their compatibility with the Craftsman tool ecosystem. Users can easily integrate them into their existing tool collection, enhancing the overall versatility of their toolkit. This seamless compatibility means that tradespeople can count on dependable performance across multiple projects.

In terms of safety, both the 104.79211 and 104.79212 models incorporate safety features designed to protect users during operation. This gives peace of mind while working on different tasks.

Overall, the Craftsman 104.79211 and 104.79212 embody a perfect blend of reliability, user-friendly design, and advanced features. Whether you are a seasoned professional or a novice, these tools provide exceptional performance for a wide range of tasks, reinforcing Craftsman's reputation as a leader in the tool industry. With their focus on innovation and user comfort, these models are a worthwhile addition for anyone looking to enhance their tool collection.