Snapper RP2167519B Check Mower Blade, Check Engine Drive Belt, Check Transmission POLY-V Belt

Page 12

Section 3 – MAINTENANCE

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

3.2.3. CHECK MOWER BLADE

1.Disconnect spark plug wire and secure end away from plug.

2.Tilt mower up on its rear wheels for access to the blade cap screw. Do not tilt mower with spark plug or carburetor down. See Figure 3.4.

3.Check torque of blade retaining cap screw.

Recommended torque should be 40 ft. lbs.

See

Figure 3.4.

 

4.Check blade for sharpness, wear and damage. Refer to Section “Blade Wear Limits”.

3.2.4.CHECK ENGINE DRIVE BELT

1.Visually check engine drive belt for cracking, fraying, severed or belt strands exposed. If worn or damaged, replace belt before operating mower.

3.2.5.CHECK TRANSMISSION POLY-V BELT

1.Visually check poly-v belt for cracking, fraying, severed or belt strands exposed. If worn or damaged, replace belt before operating mower.

RECOMMENDED

BLADE RETAINING

CAP SCREW

TORQUE VALUE

SHOULD BE 40 FT.

LBS.

FIGURE 3.4

3.3 SERVICE - ANNUALLY

Perform all maintenance as described in the “Service Schedule” section of this manual.

3.3.1. Engine

Service engine according to engine owner’s manual.

3.3.2. Air Filter

Refer to engine owner’s manual for service instructions.

3.3.3. Engine Oil

Refer to engine owner’s manual for service instructions.

3.4 STORAGE PROCEDURE

Refer to the Engine Owner’s Manual for directions regarding engine storage preparations. Prepare the mower for “end of season” storage as follows:

1.Drain fuel from fuel tank and let engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into exhaust or air intakes during washing.

4.Tilt mower up on its rear wheels and thoroughly clean the underside of the deck. Do not tilt mower with spark plug or carburetor down. Scrape away any accumulation of grass with a putty knife and or wire brush.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

6.On self-propelled models disconnect transfer rod clip and remove ground speed control rod before folding handles.

7.Loosen handle knobs. Carefully fold the handles forward, “flexing” the control cables to prevent cable damage.

8.Store the mower in a shed or other dry area, protected from weather.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Engine Option Engine DesignationSeries Designation TP 100-5087-IR-WB-NImportant Safety Instructions From Previous Do not refuel the machine indoorsFrom Previous Column Important Safety Instructions Table of Contents Briggs Engine Speed Kawasaki ControlIntroduction NomenclaturePRE-START Check List Starting & OperationEngine & Blade Briggs Engine Handle Height Adjustment Cutting Height AdjustmentStopping Propelling MowerInstallation of Side Discharge Deflector Recycling OperationTo Raise Recycling Cover Installation of Grass BAG Door Type Bag Service After First 5 Hours 3.2.1. Change Engine OIL Dispose of drain oil properlyImportant Drain fuel tank before tipping mower Service Annually Storage ProcedureCheck Mower Blade Check Engine Drive BeltMower Blade Replacement Standard Blade Wear Limit Blade Sharpening1.A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Driven and Drive Disc Service Cleaning Drive Disc & Driven DiscDrive Spring Repair/Replacement Driven Disc AdjustmentOn Next Replacing Rubber Driven Disc Repair & Adjustments Belt Service Engine Drive Belt Replacement Stretch Type BeltsOn Next Reinstall blade hub and cutter blade Pulley PositionBattery Service NEW Battery Preparation 1. Remove battery from cartonBattery Testing Battery Service 1. Remove batteryProblem Probable Cause Corrective ActionService Performed Each MAINTENANCE/REPLACEMENT Parts100 USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Page Steel Deck Recycling Walk Mowers Series

RP216019KWV, RP217019BV, RP217019BVE, RP2167519B specifications

The Snapper RP2167519B, RP217019BV, RP217019BVE, and RP216019KWV are standout models in Snapper's line of riding lawn mowers, designed for homeowners seeking efficiency, durability, and performance. Each model showcases a blend of innovative technologies and thoughtful engineering, making them suitable for various lawn care needs.

The RP2167519B features a robust 42-inch cutting deck powered by a reliable and efficient engine. This model comes equipped with a hydrostatic transmission, which allows for smooth acceleration and easy maneuverability, enabling users to tackle large lawns with ease. Its compact design makes it ideal for fitting into smaller spaces, while the adjustable cutting height gives users the flexibility to maintain their grass at the desired length.

The RP217019BV is another excellent option that boasts a powerful 19.5 HP engine. This model is equipped with a high-performance gear drive, providing users with enhanced control and responsiveness. The 42-inch deck is complemented by a side discharge feature, efficiently dispersing grass clippings while mowing. Furthermore, the ergonomic seating and user-friendly controls ensure comfort during extended use, making lawn care a more pleasant experience.

For those looking for added versatility, the RP217019BVE is a standout model with enhanced features. Similar in build to the RP217019BV, this variant introduces electric start technology, eliminating the need for manual pulling and simplifying the start-up process. The model incorporates a sturdy frame and premium materials, ensuring longevity and resilience over years of regular use. A mulching kit can also be easily added, offering users different options for maintaining their lawns.

Lastly, the RP216019KWV offers a unique combination of power and efficiency in a compact design. Featuring a 19 HP engine, this model is designed to operate quietly while delivering excellent cutting performance. Its easy-to-use controls and superior maneuverability make it a fantastic choice for homeowners with intricate landscaping. The model’s maintenance-free transmission is another highlight, as it requires less upkeep compared to traditional gear systems.

In summary, the Snapper RP2167519B, RP217019BV, RP217019BVE, and RP216019KWV provide users with reliable options tailored to various mowing needs. With their powerful engines, versatile features, and user-friendly designs, these riding mowers stand out as excellent investments for efficient lawn care. Whether for efficiency, comfort, or performance, Snapper consistently delivers quality in their riding lawn mowers.
Top Page Image Contents