Snapper RP216019KWV, RP2167519B Do not refuel the machine indoors, From Previous Column

Page 3

IMPORTANT SAFETY INSTRUCTIONS

SAFE HANDLING OF GASOLINE

(Continued From Previous Page)

3.DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.

4.DO NOT refuel the machine indoors.

5.DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

6.DO NOT fill fuel containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place the containers on the ground away from the vehicle before filling.

7.Remove gas-powered equipment from the vehicle or trailer and refuel it on the ground. If this is not possible, then refuel equipment using a portable container, rather than a gasoline dispenser nozzle.

8.DO NOT start gas powered equipment in enclosed vehicles or trailers.

9.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. DO NOT use a nozzle lock-open device

10.If fuel is spilled on clothing, change clothing immediately.

11.DO NOT overfill a fuel tank. Replace fuel cap and tighten securely.

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage before starting.

6.DO NOT mow near drop offs, ditches or embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT mow on wet grass. Always be sure of your footing. Keep a firm hold on the handle and walk, never run. Slipping could cause injury.

9.ALWAYS stay behind handle when engine (motor) is running.

10.DO NOT leave the machine with the engine running. STOP BLADE and STOP ENGINE before leaving the operators position for any reason.

3

OPERATION

(Continued From Previous Column)

11.Before cleaning, repairing or inspecting make certain engine, blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

12.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

13.DO NOT operate mower without the entire grass catcher, discharge guard, rear guard or other safety devices in place and working. DO NOT point discharge at people, passing cars, windows or doors.

14.DO NOT discharge material against a wall or obstruction. Material may ricochet back towards the operator.

15.Slow down before turning.

16.Watch out for traffic when near or crossing roadways.

17.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

18.Only use accessories approved by the manufacturer. See manufacturer’s instructions for proper operation and installation of accessories.

MAINTENANCE AND STORAGE

1.DO NOT store mower or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Always provide adequate ventilation when running engine. Engine exhaust gases contain carbon monoxide, a deadly poison.

6.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

7.DO NOT change engine governor speed settings or overspeed engine.

8.Check grass bag assembly frequently for wear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider or bag adapter if broken or cracked.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents TP 100-5087-IR-WB-N Engine OptionEngine Designation Series DesignationImportant Safety Instructions From Previous Do not refuel the machine indoorsFrom Previous Column Important Safety Instructions Table of Contents Nomenclature Briggs Engine Speed KawasakiControl IntroductionPRE-START Check List Starting & OperationEngine & Blade Briggs Engine Propelling Mower Handle Height AdjustmentCutting Height Adjustment StoppingInstallation of Side Discharge Deflector Recycling OperationTo Raise Recycling Cover Installation of Grass BAG Door Type Bag Service After First 5 Hours 3.2.1. Change Engine OIL Dispose of drain oil properlyImportant Drain fuel tank before tipping mower Check Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeMower Blade Replacement Standard Blade Wear Limit Blade Sharpening1.A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementOn Next Replacing Rubber Driven Disc Repair & Adjustments Belt Service Engine Drive Belt Replacement Stretch Type BeltsOn Next Pulley Position Reinstall blade hub and cutter bladeBattery Service 1. Remove battery Battery ServiceNEW Battery Preparation 1. Remove battery from carton Battery TestingCorrective Action Problem Probable CauseUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Page Steel Deck Recycling Walk Mowers Series

RP216019KWV, RP217019BV, RP217019BVE, RP2167519B specifications

The Snapper RP2167519B, RP217019BV, RP217019BVE, and RP216019KWV are standout models in Snapper's line of riding lawn mowers, designed for homeowners seeking efficiency, durability, and performance. Each model showcases a blend of innovative technologies and thoughtful engineering, making them suitable for various lawn care needs.

The RP2167519B features a robust 42-inch cutting deck powered by a reliable and efficient engine. This model comes equipped with a hydrostatic transmission, which allows for smooth acceleration and easy maneuverability, enabling users to tackle large lawns with ease. Its compact design makes it ideal for fitting into smaller spaces, while the adjustable cutting height gives users the flexibility to maintain their grass at the desired length.

The RP217019BV is another excellent option that boasts a powerful 19.5 HP engine. This model is equipped with a high-performance gear drive, providing users with enhanced control and responsiveness. The 42-inch deck is complemented by a side discharge feature, efficiently dispersing grass clippings while mowing. Furthermore, the ergonomic seating and user-friendly controls ensure comfort during extended use, making lawn care a more pleasant experience.

For those looking for added versatility, the RP217019BVE is a standout model with enhanced features. Similar in build to the RP217019BV, this variant introduces electric start technology, eliminating the need for manual pulling and simplifying the start-up process. The model incorporates a sturdy frame and premium materials, ensuring longevity and resilience over years of regular use. A mulching kit can also be easily added, offering users different options for maintaining their lawns.

Lastly, the RP216019KWV offers a unique combination of power and efficiency in a compact design. Featuring a 19 HP engine, this model is designed to operate quietly while delivering excellent cutting performance. Its easy-to-use controls and superior maneuverability make it a fantastic choice for homeowners with intricate landscaping. The model’s maintenance-free transmission is another highlight, as it requires less upkeep compared to traditional gear systems.

In summary, the Snapper RP2167519B, RP217019BV, RP217019BVE, and RP216019KWV provide users with reliable options tailored to various mowing needs. With their powerful engines, versatile features, and user-friendly designs, these riding mowers stand out as excellent investments for efficient lawn care. Whether for efficiency, comfort, or performance, Snapper consistently delivers quality in their riding lawn mowers.
Top Page Image Contents