Snapper How to Use the Cruise Control, Push the brake pedal, How to Drive in Reverse

Page 16

How to Use the Cruise Control

To engage the cruise control:

1.Slowly push the speed control pedal forward to the desired speed (Figure 12).

2.Pull up on the cruise control knob (Figure 13). Release the speed control pedal. The unit should continue traveling forward at the desired speed.

NOTE: The cruise control only operates in forward speeds.

To disengage the cruise control:

1.Push the speed control pedal (Figure 12), OR

2.Push the brake pedal.

WARNING: Do not engage the cruise control when driving on slopes, or when people or animals are in the vicinity.

A

Figure 13: Cruise control

A - Cruise Control knob

How to Drive in Reverse

1.Look to the rear.

2.Slowly push the speed control pedal to the REVERSE position.

How to Change Direction

CAUTION: To change directions, do not use the left brake pedal. Use only the speed control pedal.

1.Slowly remove your foot from the speed control pedal. The speed control pedal will automatically return to the NEUTRAL position.

2.When the unit stops, slowly move the speed control pedal to the desired direction.

Speed Control Pedal Positions

The forward speed is controlled by the position of the speed control pedal. The following chart provides functions along with the pedal positions. Always operate the engine with the throttle control in the FAST position.

Function

Pedal Positon

Throttle Position

 

 

 

Trimming

1/3

Fast Throttle

Snow Thrower

 

 

Bagging Grass

1/3 to 1/2

 

 

 

 

Normal Mowing

1/2 to 2/3

 

 

 

 

Easy Mowing

1/2 to 3/4

 

Snow Blade

 

 

 

Transport

FULL

 

 

 

 

Pull Behind

1/3 to 1/2

 

Attachments

 

 

 

How to Disconnect the Transmission

To push the unit, use the automatic drive disconnect to release the transmission. The automatic drive disconnect is located on the right rear of the unit.

1.The engine must be off.

2.Pull out and lock the automatic drive disconnect in the PUSH position (Figure 13). The transmission is now released and the unit can be pushed.

NOTE: In cold weather, the heavy viscosity oil in the transmission will make the unit difficult to push.

3.To engage the transmission, unlock and push in the automatic drive disconnect. The transmission is now connected and ready to operate.

English

14

www.snapper.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Lawn Tractor Series Engine Where to Find Us MowerDate Purchased Table of Contents Protection for Children Protection against TipoversPreparation Do not allow pre-teenage children to operate machineSafe Handling of Gasoline Towing International Pictorials GhijAssembly Parts Bag ContentsInstalling the Seat Assembling the Steering WheelMaintenance Free Battery How to Install the Battery CablesRemove the protective cap from the battery terminal How To Check The Safety Interlock SwitchesIMPORTANT! Before You Start Mowing Operator Presence System SeatCheck the Tires How to Prepare the EngineCheck the Level of the Mower Deck Features and Controls Using Controls How to Use the Throttle ControlHow to Engage the Blades 42 Models OperationHow to Use the Speed Control Pedal How to Engage the Blades 46 & 52 modelsDriving and Stopping the Unit How to Use the Cruise Control How to Drive in ReverseHow to Change Direction Push the brake pedalHow to Change the Cutting Height How to Set the Parking BrakeHow to Stop the Unit How to Transport the Unit How to Operate the Mower DeckRemove the key to restrict access to the RMO feature MowingHow to Stop on a Hill How to Operate the Unit on HillsHow to Start Operation on a Hill How to Start the Engine Engine OperationBefore Starting the Engine Check the Oil Add GasolineTips Operating TipsMowing and Bagging Tips Use the left side of the mower deck to trim near an objectMaintenance Maintenance ScheduleFrequency Maintenance Required Comments Maintenance engine Examine bladesHow to Check the Muffler How to Remove and Install the BladeGeneral Recommendations InspectionHow to Sharpen the Blade AdjustmentsHow to Adjust the Blade Rotation Control 42 Models Blade engage cable adjustment Blade engage cable bracket How to Check and Adjust the PTO Clutch 46 & 52 Models Blade Brake Check 46 & 52 Models OnlyHow to Check and Adjust the Motion Drive Belt Remove the 1/4 inch 6 mm pin or bolt FigureHow to Remove the Battery How to Clean the BatteryHow to Charge the Battery Before you charge the battery, remove the batteryWhere to Lubricate LubricationMower Deck Maintenance How to Check the Fuel FilterHow to Install the Mower Deck 42 Models Remove the mower drive belt from the stack pulleyMower driver belt V Belt guide Stack pulley How to Remove the Mower Deck 46 & 52 Models How to Install the Mower Deck 46 & 52 ModelsHanger rod Q Adjuster arm How to Level the Mower Deck How to Adjust the Gauge WheelsRemove the gauge wheels Figure Loosening adjuster knobs Lift link Adjuster knobs Replacing the Motion Drive BeltHow to Replace the Mower Drive Belt 42 Models English How to Replace the Primary Mower Drive Belt 46 & 52 Models Remove the primary mower drive belt from the stack pulleyEnglish How to Replace the Fuse How to Install the WheelsFasten the rear wheel with washer and e-ring Storage over 30 days Troubleshooting Troubleshooting ChartPedal is depressed When the brake pedal is CorrectlyCut level Mower blades will notSpecifications Product SpecificationsEnglish English Year Limited Warranty Snapper Products Macon Street McDonough, GA

SLT23460 LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CLT195420, LT23460, CLT23460, LT24520, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CSLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520 specifications

The Snapper lawn mower series, including models like LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC, showcases innovative features designed to provide convenience, performance, and efficiency in lawn care solutions. These mowers are particularly notable for their robust engineering and adaptability to various mowing conditions.

One of the key characteristics of the Snapper LT and CLT series is their powerful engine options. Each model is equipped with high-performance engines that ensure reliable starting, effective cutting power, and efficient fuel consumption. The LT195420 and CLT195420 models, for instance, feature a 19-inch cutting deck that enhances maneuverability and provides impressive cutting precision in tighter spaces.

The LT23460 and CLT23460 models, with their larger 23-inch cutting decks, cater to users looking for faster mowing capabilities without sacrificing quality. These mowers also incorporate a unique three-in-one cutting system, allowing users to choose between mulching, side discharge, or bagging clippings, depending on the lawn care needs.

The SLT and CSLT series take user comfort and ease of operation to the next level. These models feature ergonomically designed handles and comfortable seat systems that can be adjusted to suit the user's height, ensuring a pleasant mowing experience. Additionally, the SLT24520FC and SLT23460FC versions come with enhanced features for those who desire a more versatile approach to lawn maintenance.

Snapper’s commitment to innovation is evident in the incorporation of advanced technologies, including electric start capabilities and dual-blade cutting systems. This design maximizes cutting efficiency and results in a cleaner, more even finish on the lawn.

Durability is another hallmark of the Snapper mower lineup, with heavy-duty steel construction used in most models to ensure longevity, even in challenging mowing conditions. The series also includes features for easy maintenance, such as accessible oil and air filter locations, allowing homeowners to perform routine upkeep without hassle.

In summary, the Snapper LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC models are engineered for both performance and user convenience. Their combination of powerful engines, innovative cutting systems, and ergonomic designs make them an excellent choice for anyone looking to maintain a pristine lawn with ease and efficiency.
Top Page Image Contents