Snapper specifications Troubleshooting Chart

Page 42

Troubleshooting

 

 

Troubleshooting Chart

 

 

Problem

Correction

 

 

 

 

1.

Follow the steps, “How To Start The Engine” in this book.

 

2.

Electric-Start Models: Clean the battery terminals. Tighten the cables.

The engine will not start.

3.

Drain the fuel tank. Clean the fuel line. Replace the fuel filter.

4.

Remove the spark plug(s). Move the throttle to the SLOW position. Turn the ignition key

 

 

 

to the ON position. Try to start the engine several times. Install the spark plug.

 

5.

Replace the spark plug.

 

 

 

 

1.

Follow the steps, “How To Start The Engine” in this book.

 

2.

Electric-Start Models: Charge the battery.

The engine will not turn over.

3.

Replace the fuse.

4.

Check the wiring harness for damage or a loose connection. Repair the damaged wire.

 

 

5.

Electric-Start Models: Replace the solenoid.

1.Replace the spark plug.

The engine is difficult to start. 2. Replace the fuel filter.

 

1.

Check the oil.

The engine does not run

2.

Clean the air filter.

smooth or has a loss of

3.

Clean the air screen.

power.

4.

Replace the spark plug.

 

5.

Replace the fuel filter.

 

 

 

 

1.

Replace the spark plug.

The engine does not run

2.

Adjust the throttle control.

smooth at fast speed.

3.

Clean the air filter.

 

4.

Replace the fuel filter.

 

 

 

The engine stops when the

1.

To activate the seat sensor, always sit in the middle of the seat.

blades are engaged.

2.

Check the wiring harness for damage or a loose connection. Repair the damaged wire.

 

 

 

On slopes, the engine stops.

1.

Mow up and down slopes. Never mow across a slope.

2.

To activate the seat sensor, always sit in the middle of the seat.

 

 

 

 

 

1.

Replace the spark plug.

The engine will not idle.

2.

Clean the air filter.

3.

Adjust the throttle control.

 

 

4.

Drain the fuel tank. Clean the fuel line. Replace the fuel filter.

 

 

 

A hot engine causes a

1.

Clean the air screen.

2.

Check the oil.

decrease in power.

3.

Replace the fuel filter.

 

 

 

 

 

1.

Replace the blade.

Excessive vibration.

2.

Check for loose engine bolts.

3.

Decrease the air pressure in the tires.

 

 

4.

Check for a damaged belt or damaged pulley. Replace the damaged parts.

English

40

www.snapper.com

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Lawn Tractor Series Where to Find Us Mower EngineDate Purchased Table of Contents Preparation Protection for ChildrenProtection against Tipovers Do not allow pre-teenage children to operate machineSafe Handling of Gasoline Towing International Pictorials GhijAssembly Parts Bag ContentsInstalling the Seat Assembling the Steering WheelMaintenance Free Battery How to Install the Battery CablesIMPORTANT! Before You Start Mowing Remove the protective cap from the battery terminalHow To Check The Safety Interlock Switches Operator Presence System SeatHow to Prepare the Engine Check the TiresCheck the Level of the Mower Deck Features and Controls How to Engage the Blades 42 Models Using ControlsHow to Use the Throttle Control OperationHow to Engage the Blades 46 & 52 models How to Use the Speed Control PedalDriving and Stopping the Unit How to Change Direction How to Use the Cruise ControlHow to Drive in Reverse Push the brake pedalHow to Set the Parking Brake How to Change the Cutting HeightHow to Stop the Unit Remove the key to restrict access to the RMO feature How to Transport the UnitHow to Operate the Mower Deck MowingHow to Operate the Unit on Hills How to Stop on a HillHow to Start Operation on a Hill Before Starting the Engine Check the Oil How to Start the EngineEngine Operation Add GasolineMowing and Bagging Tips TipsOperating Tips Use the left side of the mower deck to trim near an objectFrequency Maintenance Required Comments MaintenanceMaintenance Schedule Maintenance engine Examine bladesGeneral Recommendations How to Check the MufflerHow to Remove and Install the Blade InspectionAdjustments How to Sharpen the BladeHow to Adjust the Blade Rotation Control 42 Models Blade engage cable adjustment Blade engage cable bracket How to Check and Adjust the PTO Clutch 46 & 52 Models Blade Brake Check 46 & 52 Models OnlyHow to Check and Adjust the Motion Drive Belt Remove the 1/4 inch 6 mm pin or bolt FigureHow to Charge the Battery How to Remove the BatteryHow to Clean the Battery Before you charge the battery, remove the batteryWhere to Lubricate LubricationHow to Install the Mower Deck 42 Models Mower Deck MaintenanceHow to Check the Fuel Filter Remove the mower drive belt from the stack pulleyMower driver belt V Belt guide Stack pulley How to Remove the Mower Deck 46 & 52 Models How to Install the Mower Deck 46 & 52 ModelsHanger rod Q Adjuster arm How to Adjust the Gauge Wheels How to Level the Mower DeckRemove the gauge wheels Figure Loosening adjuster knobs Lift link Adjuster knobs Replacing the Motion Drive BeltHow to Replace the Mower Drive Belt 42 Models English How to Replace the Primary Mower Drive Belt 46 & 52 Models Remove the primary mower drive belt from the stack pulleyEnglish How to Install the Wheels How to Replace the FuseFasten the rear wheel with washer and e-ring Storage over 30 days Troubleshooting Troubleshooting ChartCut level Pedal is depressed When the brake pedal isCorrectly Mower blades will notSpecifications Product SpecificationsEnglish English Year Limited Warranty Snapper Products Macon Street McDonough, GA

SLT23460 LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CLT195420, LT23460, CLT23460, LT24520, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CSLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520 specifications

The Snapper lawn mower series, including models like LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC, showcases innovative features designed to provide convenience, performance, and efficiency in lawn care solutions. These mowers are particularly notable for their robust engineering and adaptability to various mowing conditions.

One of the key characteristics of the Snapper LT and CLT series is their powerful engine options. Each model is equipped with high-performance engines that ensure reliable starting, effective cutting power, and efficient fuel consumption. The LT195420 and CLT195420 models, for instance, feature a 19-inch cutting deck that enhances maneuverability and provides impressive cutting precision in tighter spaces.

The LT23460 and CLT23460 models, with their larger 23-inch cutting decks, cater to users looking for faster mowing capabilities without sacrificing quality. These mowers also incorporate a unique three-in-one cutting system, allowing users to choose between mulching, side discharge, or bagging clippings, depending on the lawn care needs.

The SLT and CSLT series take user comfort and ease of operation to the next level. These models feature ergonomically designed handles and comfortable seat systems that can be adjusted to suit the user's height, ensuring a pleasant mowing experience. Additionally, the SLT24520FC and SLT23460FC versions come with enhanced features for those who desire a more versatile approach to lawn maintenance.

Snapper’s commitment to innovation is evident in the incorporation of advanced technologies, including electric start capabilities and dual-blade cutting systems. This design maximizes cutting efficiency and results in a cleaner, more even finish on the lawn.

Durability is another hallmark of the Snapper mower lineup, with heavy-duty steel construction used in most models to ensure longevity, even in challenging mowing conditions. The series also includes features for easy maintenance, such as accessible oil and air filter locations, allowing homeowners to perform routine upkeep without hassle.

In summary, the Snapper LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC models are engineered for both performance and user convenience. Their combination of powerful engines, innovative cutting systems, and ergonomic designs make them an excellent choice for anyone looking to maintain a pristine lawn with ease and efficiency.
Top Page Image Contents