Snapper specifications Storage over 30 days

Page 41

How to Replace the Light Bulb

1.Raise the tractor hood.

2.Turn the light socket until the tabs on the socket align with the notches in the bezel (Figure 46). Remove the light socket. Turn the light bulb and remove the bulb.

3.Install a new light bulb. Align the light socket with the notches in the bezel and turn the light socket to lock in position.

A

B

C

Figure 47: Light bulb replacement

A - Bezel

B - Light bulb

C - Light socket

How to Clean the Mower Deck

WARNING: Before you clean the mower deck, stop the engine and disconnect the wire to the spark plug.

Grass and other debris on top of the mower deck can keep the belt from working correctly. For safety and correct operation, frequently clean the top of the mower deck. Remove grass and debris from around the pulleys and other moving parts.

1.Move the lever for the blade rotation control to the ENGAGE position (42” models only).

2.Clean the top of the mower deck.

3.Move the lever for the blade rotation control to the DISENGAGE position (42” models only).

4.Again clean the top of the mower deck (42” models only).

5.After you cut the grass, clean the bottom of the mower deck.

Storage (over 30 days)

At the end of each year, prepare the unit for storage as follows.

The Engine

For storage information, see the the engine manufacturer’s instructions.

The Battery

1.Remove the battery.

2.Clean the battery terminals of any deposits.

3.Charge the battery. See the instructions on “How To Prepare And Charge The Battery”.

4.Store the battery in a cool, dry place.

NOTE: After a long time in storage, charge the battery.

The Fuel System

WARNING: Do not drain the gasoline inside a building or near a fire. Do not smoke because the fumes from the fuel can cause an explosion.

1.Start the engine.

2.Run the engine until the fuel tank and the carburetor are out of fuel and the engine stops.

3.After storage, make sure you use fresh fuel.

Clean the Unit

1.Clean the dirt and grass from the engine.

2.Clean the mower housing.

Lubricate the Unit

See the “Lubrication” instructions in this book.

English

39

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Lawn Tractor Series Date Purchased Where to Find Us MowerEngine Table of Contents Protection against Tipovers Protection for ChildrenPreparation Do not allow pre-teenage children to operate machineSafe Handling of Gasoline Towing Ghij International PictorialsParts Bag Contents AssemblyAssembling the Steering Wheel Installing the SeatHow to Install the Battery Cables Maintenance Free BatteryHow To Check The Safety Interlock Switches Remove the protective cap from the battery terminalIMPORTANT! Before You Start Mowing Operator Presence System SeatCheck the Level of the Mower Deck How to Prepare the EngineCheck the Tires Features and Controls How to Use the Throttle Control Using ControlsHow to Engage the Blades 42 Models OperationDriving and Stopping the Unit How to Engage the Blades 46 & 52 modelsHow to Use the Speed Control Pedal How to Drive in Reverse How to Use the Cruise ControlHow to Change Direction Push the brake pedalHow to Stop the Unit How to Set the Parking BrakeHow to Change the Cutting Height How to Operate the Mower Deck How to Transport the UnitRemove the key to restrict access to the RMO feature MowingHow to Start Operation on a Hill How to Operate the Unit on HillsHow to Stop on a Hill Engine Operation How to Start the EngineBefore Starting the Engine Check the Oil Add GasolineOperating Tips TipsMowing and Bagging Tips Use the left side of the mower deck to trim near an objectMaintenance Schedule MaintenanceFrequency Maintenance Required Comments Maintenance engine Examine bladesHow to Remove and Install the Blade How to Check the MufflerGeneral Recommendations InspectionHow to Adjust the Blade Rotation Control 42 Models AdjustmentsHow to Sharpen the Blade Blade engage cable adjustment Blade engage cable bracket Blade Brake Check 46 & 52 Models Only How to Check and Adjust the PTO Clutch 46 & 52 ModelsRemove the 1/4 inch 6 mm pin or bolt Figure How to Check and Adjust the Motion Drive BeltHow to Clean the Battery How to Remove the BatteryHow to Charge the Battery Before you charge the battery, remove the batteryLubrication Where to LubricateHow to Check the Fuel Filter Mower Deck MaintenanceHow to Install the Mower Deck 42 Models Remove the mower drive belt from the stack pulleyMower driver belt V Belt guide Stack pulley How to Install the Mower Deck 46 & 52 Models How to Remove the Mower Deck 46 & 52 ModelsHanger rod Q Adjuster arm Remove the gauge wheels Figure How to Adjust the Gauge WheelsHow to Level the Mower Deck Replacing the Motion Drive Belt Loosening adjuster knobs Lift link Adjuster knobsHow to Replace the Mower Drive Belt 42 Models English Remove the primary mower drive belt from the stack pulley How to Replace the Primary Mower Drive Belt 46 & 52 ModelsEnglish Fasten the rear wheel with washer and e-ring How to Install the WheelsHow to Replace the Fuse Storage over 30 days Troubleshooting Chart TroubleshootingCorrectly Pedal is depressed When the brake pedal isCut level Mower blades will notProduct Specifications SpecificationsEnglish English Year Limited Warranty Snapper Products Macon Street McDonough, GA

SLT23460 LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CLT195420, LT23460, CLT23460, LT24520, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CSLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520 specifications

The Snapper lawn mower series, including models like LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC, showcases innovative features designed to provide convenience, performance, and efficiency in lawn care solutions. These mowers are particularly notable for their robust engineering and adaptability to various mowing conditions.

One of the key characteristics of the Snapper LT and CLT series is their powerful engine options. Each model is equipped with high-performance engines that ensure reliable starting, effective cutting power, and efficient fuel consumption. The LT195420 and CLT195420 models, for instance, feature a 19-inch cutting deck that enhances maneuverability and provides impressive cutting precision in tighter spaces.

The LT23460 and CLT23460 models, with their larger 23-inch cutting decks, cater to users looking for faster mowing capabilities without sacrificing quality. These mowers also incorporate a unique three-in-one cutting system, allowing users to choose between mulching, side discharge, or bagging clippings, depending on the lawn care needs.

The SLT and CSLT series take user comfort and ease of operation to the next level. These models feature ergonomically designed handles and comfortable seat systems that can be adjusted to suit the user's height, ensuring a pleasant mowing experience. Additionally, the SLT24520FC and SLT23460FC versions come with enhanced features for those who desire a more versatile approach to lawn maintenance.

Snapper’s commitment to innovation is evident in the incorporation of advanced technologies, including electric start capabilities and dual-blade cutting systems. This design maximizes cutting efficiency and results in a cleaner, more even finish on the lawn.

Durability is another hallmark of the Snapper mower lineup, with heavy-duty steel construction used in most models to ensure longevity, even in challenging mowing conditions. The series also includes features for easy maintenance, such as accessible oil and air filter locations, allowing homeowners to perform routine upkeep without hassle.

In summary, the Snapper LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC models are engineered for both performance and user convenience. Their combination of powerful engines, innovative cutting systems, and ergonomic designs make them an excellent choice for anyone looking to maintain a pristine lawn with ease and efficiency.
Top Page Image Contents