Snapper specifications Correctly, Cut level, Mower blades will not, Rotate, Speed control pedal is

Page 43

 

 

Troubleshooting Chart Continued

 

 

Problem

Correction

 

 

 

 

1.

Stop the engine. Clean the mower deck.

 

2.

Raise the height of cut.

The grass does not discharge

3.

Replace or sharpen the blade(s).

correctly.

4

Use a slower ground speed.

 

5.

Move the throttle control to the FAST position.

 

6.

Replace the spring for the blade idler.

 

 

 

The mower housing does not

1.

Check the air pressure in the tires.

2.

Adjust the level of the mower deck.

cut level.

3.

Check the front axle. If the front axle does not freely pivot, loosen the axle bolt(s).

 

 

 

 

The mower blades will not

1.

Check the mower drive belt(s). Make sure the belt(s) are installed correctly.

rotate.

2.

Replace the mower drive belt(s).

 

 

 

The unit will not move when

1.

Release the automatic drive disconnect.

the brake is released and the

2.

Check the motion drive belt. Make sure the belt is installed correctly.

speed control pedal is

3.

Replace the motion drive belt.

depressed.

 

 

 

 

 

The unit moves slower or

1.

Check the motion drive belt. Make sure the belt is installed correctly.

2.

Replace the motion drive belt.

stops when the speed control

 

 

pedal is depressed.

 

 

 

 

 

When the brake pedal is

1.

Temporary belt noise does not change the operation of the unit. If belt noise is

released, belt noise can be

 

continuous, check the routing of the belt. Make sure the belt is inside all belt guides.

heard.

 

 

 

 

 

The rear wheels spin over

1.

Check the front axle. If the front axle does not freely pivot, loosen the axle bolt(s).

uneven terrain.

 

 

English

41

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Lawn Tractor Series Engine Where to Find Us MowerDate Purchased Table of Contents Do not allow pre-teenage children to operate machine Protection for ChildrenProtection against Tipovers PreparationSafe Handling of Gasoline Towing Ghij International PictorialsParts Bag Contents AssemblyAssembling the Steering Wheel Installing the SeatHow to Install the Battery Cables Maintenance Free BatteryOperator Presence System Seat Remove the protective cap from the battery terminalHow To Check The Safety Interlock Switches IMPORTANT! Before You Start MowingCheck the Tires How to Prepare the EngineCheck the Level of the Mower Deck Features and Controls Operation Using ControlsHow to Use the Throttle Control How to Engage the Blades 42 ModelsHow to Use the Speed Control Pedal How to Engage the Blades 46 & 52 modelsDriving and Stopping the Unit Push the brake pedal How to Use the Cruise ControlHow to Drive in Reverse How to Change DirectionHow to Change the Cutting Height How to Set the Parking BrakeHow to Stop the Unit Mowing How to Transport the UnitHow to Operate the Mower Deck Remove the key to restrict access to the RMO featureHow to Stop on a Hill How to Operate the Unit on HillsHow to Start Operation on a Hill Add Gasoline How to Start the EngineEngine Operation Before Starting the Engine Check the OilUse the left side of the mower deck to trim near an object TipsOperating Tips Mowing and Bagging TipsMaintenance engine Examine blades MaintenanceMaintenance Schedule Frequency Maintenance Required CommentsInspection How to Check the MufflerHow to Remove and Install the Blade General RecommendationsHow to Sharpen the Blade AdjustmentsHow to Adjust the Blade Rotation Control 42 Models Blade engage cable adjustment Blade engage cable bracket Blade Brake Check 46 & 52 Models Only How to Check and Adjust the PTO Clutch 46 & 52 ModelsRemove the 1/4 inch 6 mm pin or bolt Figure How to Check and Adjust the Motion Drive BeltBefore you charge the battery, remove the battery How to Remove the BatteryHow to Clean the Battery How to Charge the BatteryLubrication Where to LubricateRemove the mower drive belt from the stack pulley Mower Deck MaintenanceHow to Check the Fuel Filter How to Install the Mower Deck 42 ModelsMower driver belt V Belt guide Stack pulley How to Install the Mower Deck 46 & 52 Models How to Remove the Mower Deck 46 & 52 ModelsHanger rod Q Adjuster arm How to Level the Mower Deck How to Adjust the Gauge WheelsRemove the gauge wheels Figure Replacing the Motion Drive Belt Loosening adjuster knobs Lift link Adjuster knobsHow to Replace the Mower Drive Belt 42 Models English Remove the primary mower drive belt from the stack pulley How to Replace the Primary Mower Drive Belt 46 & 52 ModelsEnglish How to Replace the Fuse How to Install the WheelsFasten the rear wheel with washer and e-ring Storage over 30 days Troubleshooting Chart TroubleshootingMower blades will not Pedal is depressed When the brake pedal isCorrectly Cut levelProduct Specifications SpecificationsEnglish English Year Limited Warranty Snapper Products Macon Street McDonough, GA

SLT23460 LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CLT195420, LT23460, CLT23460, LT24520, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CSLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC, LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520 specifications

The Snapper lawn mower series, including models like LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC, showcases innovative features designed to provide convenience, performance, and efficiency in lawn care solutions. These mowers are particularly notable for their robust engineering and adaptability to various mowing conditions.

One of the key characteristics of the Snapper LT and CLT series is their powerful engine options. Each model is equipped with high-performance engines that ensure reliable starting, effective cutting power, and efficient fuel consumption. The LT195420 and CLT195420 models, for instance, feature a 19-inch cutting deck that enhances maneuverability and provides impressive cutting precision in tighter spaces.

The LT23460 and CLT23460 models, with their larger 23-inch cutting decks, cater to users looking for faster mowing capabilities without sacrificing quality. These mowers also incorporate a unique three-in-one cutting system, allowing users to choose between mulching, side discharge, or bagging clippings, depending on the lawn care needs.

The SLT and CSLT series take user comfort and ease of operation to the next level. These models feature ergonomically designed handles and comfortable seat systems that can be adjusted to suit the user's height, ensuring a pleasant mowing experience. Additionally, the SLT24520FC and SLT23460FC versions come with enhanced features for those who desire a more versatile approach to lawn maintenance.

Snapper’s commitment to innovation is evident in the incorporation of advanced technologies, including electric start capabilities and dual-blade cutting systems. This design maximizes cutting efficiency and results in a cleaner, more even finish on the lawn.

Durability is another hallmark of the Snapper mower lineup, with heavy-duty steel construction used in most models to ensure longevity, even in challenging mowing conditions. The series also includes features for easy maintenance, such as accessible oil and air filter locations, allowing homeowners to perform routine upkeep without hassle.

In summary, the Snapper LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, and SLT24520FC models are engineered for both performance and user convenience. Their combination of powerful engines, innovative cutting systems, and ergonomic designs make them an excellent choice for anyone looking to maintain a pristine lawn with ease and efficiency.
Top Page Image Contents