Snapper GM2513BS, FB15250KW, BC25BE, BC25H, GM2515KAW, GM2513H manual To Adjust Cutting Height, Storage

Page 11

Operating the Mower

TO ADJUST CUTTING HEIGHT

The front skids on the brush cutter have 3 sets of holes (Figure 9) for height adjustment:

–Top holes - 3 1/4" cutting depth

–Center holes - 4" cutting depth

–Bottom holes - 4 3/4" cutting depth

• Shut off engine.

• Loosen bolts holding skids.

• Move skid to desired location.

• Reinstall bolts.

STORAGE

WARNING

Never store the unit (with fuel) in an enclosed, poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion. Fuel vapor is also toxic to humans and animals.

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, and then perform the following steps:

•Disengage the PTO and remove the key.

•Perform engine maintenance and storage measures listed in the engine owner's manual. This includes draining the fuel system, or adding stabilizer to the fuel (do not store a fueled unit in an enclosed struc- ture - see above).

B

C

C

D

A

Figure 9 - Adjusting Height

A.Skid

B.Capscrew

C.Washer

D.Nut

•Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If the battery is left in the unit, disconnect the nega- tive cable.

Before starting the unit after it has been stored:

•Check all fluid levels. Check all maintenance items.

•Perform all recommended engine checks and proce- dures found in the engine owner's manual.

•Allow the engine to warm up for several minutes before using mower.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Table of Contents General Operation Safe Operation Practices for WALK-BEHIND MowersChildren Safety Rules and InformationService Slope OperationSafety Decals Safety Rules & InformationDecal Danger Flying Objects Decal WarningDecal Engine Throttle Control Decal Danger DismembermentControl Functions Features & ControlsTo Start Engine Starting the EngineEngaging the Transmission Before Starting EngineTo Propel Unit In Reverse Operating the MowerTo Propel Unit Forward To Disengage Cutting Blade ENGAGING/DISENGAGING the Cutting BladeStorage To Adjust Cutting HeightLubricate Rear Axle Shafts Regular MaintenanceService Interval Every 25 Hours LubricationCleaning the Battery and Cables All Models Except 9HP Regular MaintenanceBattery Service Cleaning the Battery and Cables 9HP ModelsRemoving the Blade Servicing the Mower BladesTroubleshooting Troubleshooting Adjustment, & ServiceTroubleshooting Troubleshooting, Adjustment & ServiceSerial Number 012003001-Up Troubleshooting, Adjustment, & ServiceTravel Control Adjustment Serial NumberShut off engine before attempting this adjustment procedure Blade Clutch AdjustmentMower Belt Adjustment Blade Brake AdjustmentFor S/N 071601076 up Traction Drive Belt AdjustmentFor S/N 0 Mower Belt Replacement Troubleshooting, Adjustment & ServiceMaintenance Items SpecificationsParts & Accessories Replacement PartsPage Products, Inc Macon Street/PO Box McDonough, GA

GM2513BS, GM2515KAW, BC25BE, BC25H, GM2513H specifications

The Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW are a series of robust outdoor power equipment designed to tackle a variety of landscaping tasks. Each model comes with unique features and characteristics that cater to different user needs, ensuring efficient performance and reliability.

The Snapper FB15250KW is a versatile 21-inch push lawn mower equipped with a powerful 150cc engine. It features a 3-in-1 cutting system, allowing users to mulch, bag, or side discharge grass clippings. Its lightweight design and ergonomic handle make it easy to maneuver, while the adjustable cutting height provides flexibility for varying grass conditions. The easy-start engine technology ensures quick and reliable starting in any weather, making it a favorite for homeowners.

The GM2513H model is a gas-powered walk-behind mower that focuses on durability and performance. Its 25-inch cutting deck allows for larger mowing areas, perfect for medium to large lawns. This mower is equipped with self-propelling capabilities, which significantly reduces user effort during operation. The mower’s high rear wheels provide stability and traction on rough terrain, enhancing overall mowing efficiency.

For those looking for a string trimmer, the BC25H and BC25BE models offer exceptional performance. The BC25H features a powerful two-cycle engine and a straight shaft design, making it ideal for trimming hard-to-reach areas. Its lightweight build ensures maximum comfort during extended use. The BC25BE, similarly equipped with a robust engine, adds versatility by incorporating a detachable design for easy storage and transportation.

Lastly, the GM2515KAW is a high-performance riding mower tailored for extensive lawns. It boasts a powerful engine and a wide cutting deck, which cuts down mowing time significantly. The comfortable seat and adjustable steering provide an excellent user experience, allowing operators to navigate their lawns with ease. Additionally, the mower is designed with advanced safety features, ensuring user confidence during operation.

In summary, the Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW cater to diverse landscaping needs, providing users with efficiency, ease of use, and reliability. These models embody Snapper's commitment to quality, making them ideal choices for both residential and professional applications in lawn care.
Top Page Image Contents