Snapper BC25BE, FB15250KW, BC25H, GM2515KAW Regular Maintenance, Tire Pressure, Battery Service

Page 13

Regular Maintenance

TIRE PRESSURE

Tire pressure is 20 psi (1.4 bar).

BATTERY SERVICE

WARNING

When removing or installing battery cables, disconnect the negative cable FIRST and reconnect it LAST. If not done in this order, the positive terminal can be shorted to the frame by a tool.

Cleaning the Battery and Cables - 9HP Models

Service Interval: Every 100 Hours

1.Disconnect the cables from the battery, negative cable first (C, Figure 13a).

2.Remove the battery hold-down (B), rubber protective sheet (D) and battery (A).

3.Clean the battery compartment with a solution of bak- ing soda and water.

4.Clean the battery terminals and cable ends with a wire brush and battery terminal cleaner until shiny.

5.Reinstall the battery in the battery compartment, place rubber sheet (D) on top of battery and secure with the battery hold-down (B).

6.Reattach the battery cables, positive cable first (C).

7.Coat the cable ends and battery terminals with petro- leum jelly or non-conducting grease.

Cleaning the Battery and Cables - All Models Except 9HP

Service Interval: Every 100 Hours

1.Turn the fuel valve OFF (the fuel valve is located under the fuel tank).

2.Remove the two 5/16-18 x 3/4 hex bolts (A, Figure 13b) securing the fuel tank assembly (B) to the unit.

3.Place a container under the fuel valve to catch spilled fuel, and remove the clamp securing the fuel line to the fuel valve.

4.Lift the fuel tank assembly off the unit and set it aside. Be careful to avoid spilling fuel.

5.Perform the battery (C) removal, cleaning, and instal- lation procedures found above in CLEANING THE BATTERY AND CABLES - 9HP MODELS

6.Reverse steps 1-4 to reinstall the fuel tank. Be sure all fasteners and fuel line connections are tight before starting the unit.

Figure 12. Check Tire Pressure

B

D

A

 

C

 

Figure 13a. Battery

 

A. Battery

C. Negative Battery Cable

B. Hold Down Clamp

D. Rubber Sheet

A

B

C

 

Figure 13b. Battery

A.5/16-18 x 3/4 Hex Bolts

B.Fuel Tank Assembly

C.Battery

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents OPERATOR’S Manual Table of Contents General Operation Safe Operation Practices for WALK-BEHIND MowersService Safety Rules and InformationSlope Operation ChildrenSafety Decals Safety Rules & InformationDecal Engine Throttle Control Decal WarningDecal Danger Dismemberment Decal Danger Flying ObjectsControl Functions Features & ControlsEngaging the Transmission Starting the EngineBefore Starting Engine To Start EngineTo Propel Unit Forward Operating the MowerTo Propel Unit In Reverse To Disengage Cutting Blade ENGAGING/DISENGAGING the Cutting BladeStorage To Adjust Cutting HeightService Interval Every 25 Hours Regular MaintenanceLubrication Lubricate Rear Axle ShaftsBattery Service Regular MaintenanceCleaning the Battery and Cables 9HP Models Cleaning the Battery and Cables All Models Except 9HPRemoving the Blade Servicing the Mower BladesTroubleshooting Troubleshooting Adjustment, & ServiceTroubleshooting Troubleshooting, Adjustment & ServiceTravel Control Adjustment Troubleshooting, Adjustment, & ServiceSerial Number Serial Number 012003001-UpShut off engine before attempting this adjustment procedure Blade Clutch AdjustmentMower Belt Adjustment Blade Brake AdjustmentFor S/N 0 Traction Drive Belt AdjustmentFor S/N 071601076 up Mower Belt Replacement Troubleshooting, Adjustment & ServiceParts & Accessories SpecificationsReplacement Parts Maintenance ItemsPage Products, Inc Macon Street/PO Box McDonough, GA

GM2513BS, GM2515KAW, BC25BE, BC25H, GM2513H specifications

The Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW are a series of robust outdoor power equipment designed to tackle a variety of landscaping tasks. Each model comes with unique features and characteristics that cater to different user needs, ensuring efficient performance and reliability.

The Snapper FB15250KW is a versatile 21-inch push lawn mower equipped with a powerful 150cc engine. It features a 3-in-1 cutting system, allowing users to mulch, bag, or side discharge grass clippings. Its lightweight design and ergonomic handle make it easy to maneuver, while the adjustable cutting height provides flexibility for varying grass conditions. The easy-start engine technology ensures quick and reliable starting in any weather, making it a favorite for homeowners.

The GM2513H model is a gas-powered walk-behind mower that focuses on durability and performance. Its 25-inch cutting deck allows for larger mowing areas, perfect for medium to large lawns. This mower is equipped with self-propelling capabilities, which significantly reduces user effort during operation. The mower’s high rear wheels provide stability and traction on rough terrain, enhancing overall mowing efficiency.

For those looking for a string trimmer, the BC25H and BC25BE models offer exceptional performance. The BC25H features a powerful two-cycle engine and a straight shaft design, making it ideal for trimming hard-to-reach areas. Its lightweight build ensures maximum comfort during extended use. The BC25BE, similarly equipped with a robust engine, adds versatility by incorporating a detachable design for easy storage and transportation.

Lastly, the GM2515KAW is a high-performance riding mower tailored for extensive lawns. It boasts a powerful engine and a wide cutting deck, which cuts down mowing time significantly. The comfortable seat and adjustable steering provide an excellent user experience, allowing operators to navigate their lawns with ease. Additionally, the mower is designed with advanced safety features, ensuring user confidence during operation.

In summary, the Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW cater to diverse landscaping needs, providing users with efficiency, ease of use, and reliability. These models embody Snapper's commitment to quality, making them ideal choices for both residential and professional applications in lawn care.
Top Page Image Contents