Snapper BC25H, FB15250KW, BC25BE, GM2515KAW, GM2513H Servicing the Mower Blades, Removing the Blade

Page 14

SERVICING THE MOWER BLADES

WARNING

For your personal safety, do not handle the sharp mower blades with bare hands. Careless or improper handling of blades may result in serious injury.

Service Interval: Every 100 Hours or As Required

1.Raise the front end of the brush mower and securely support in the raised position.

2.Blades should be sharp and free of nicks and dents. If worn or damaged, replace the blades as described in following steps.

3.To remove the blade, use a wood block to hold blade while removing the blade mounting capscrew (Figure 14). Note: Hex head bolt shown. Your mower may be equiped with a socket head capscrew.

4.Remove and set aside the cutting blade reinforce- ment channel.

5.Install the new blade into the reinforcement channel with the lift tabs pointing up toward deck (Figure 15). Secure with the capscrew and lockwasher. Use a wooden block to prevent blade rotation and torque capscrew (C, Figure 15) to 233 ft. lbs. (315 N.m.).

WARNING

For your personal safety the blade mounting capscrew must be installed with a lockwasher, then securely tightened. Torque blade mounting capscrew to 233 ft. lbs. (315 N.m.)

Regular Maintenance

LOOSEN

Figure 14 - Removing the Blade

B

C

A

Figure 15 - Installing The Blade

A.4x4 Wood Block

B.Lockwasher

C.Capscrew

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual Table of Contents Safe Operation Practices for WALK-BEHIND Mowers General OperationSlope Operation Safety Rules and InformationService ChildrenSafety Rules & Information Safety DecalsDecal Danger Dismemberment Decal WarningDecal Engine Throttle Control Decal Danger Flying ObjectsFeatures & Controls Control FunctionsBefore Starting Engine Starting the EngineEngaging the Transmission To Start EngineTo Propel Unit In Reverse Operating the MowerTo Propel Unit Forward ENGAGING/DISENGAGING the Cutting Blade To Disengage Cutting BladeTo Adjust Cutting Height StorageLubrication Regular MaintenanceService Interval Every 25 Hours Lubricate Rear Axle ShaftsCleaning the Battery and Cables 9HP Models Regular MaintenanceBattery Service Cleaning the Battery and Cables All Models Except 9HPServicing the Mower Blades Removing the BladeTroubleshooting Adjustment, & Service TroubleshootingTroubleshooting, Adjustment & Service TroubleshootingSerial Number Troubleshooting, Adjustment, & ServiceTravel Control Adjustment Serial Number 012003001-UpBlade Clutch Adjustment Shut off engine before attempting this adjustment procedureBlade Brake Adjustment Mower Belt AdjustmentFor S/N 071601076 up Traction Drive Belt AdjustmentFor S/N 0 Troubleshooting, Adjustment & Service Mower Belt ReplacementReplacement Parts SpecificationsParts & Accessories Maintenance ItemsPage Products, Inc Macon Street/PO Box McDonough, GA

GM2513BS, GM2515KAW, BC25BE, BC25H, GM2513H specifications

The Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW are a series of robust outdoor power equipment designed to tackle a variety of landscaping tasks. Each model comes with unique features and characteristics that cater to different user needs, ensuring efficient performance and reliability.

The Snapper FB15250KW is a versatile 21-inch push lawn mower equipped with a powerful 150cc engine. It features a 3-in-1 cutting system, allowing users to mulch, bag, or side discharge grass clippings. Its lightweight design and ergonomic handle make it easy to maneuver, while the adjustable cutting height provides flexibility for varying grass conditions. The easy-start engine technology ensures quick and reliable starting in any weather, making it a favorite for homeowners.

The GM2513H model is a gas-powered walk-behind mower that focuses on durability and performance. Its 25-inch cutting deck allows for larger mowing areas, perfect for medium to large lawns. This mower is equipped with self-propelling capabilities, which significantly reduces user effort during operation. The mower’s high rear wheels provide stability and traction on rough terrain, enhancing overall mowing efficiency.

For those looking for a string trimmer, the BC25H and BC25BE models offer exceptional performance. The BC25H features a powerful two-cycle engine and a straight shaft design, making it ideal for trimming hard-to-reach areas. Its lightweight build ensures maximum comfort during extended use. The BC25BE, similarly equipped with a robust engine, adds versatility by incorporating a detachable design for easy storage and transportation.

Lastly, the GM2515KAW is a high-performance riding mower tailored for extensive lawns. It boasts a powerful engine and a wide cutting deck, which cuts down mowing time significantly. The comfortable seat and adjustable steering provide an excellent user experience, allowing operators to navigate their lawns with ease. Additionally, the mower is designed with advanced safety features, ensuring user confidence during operation.

In summary, the Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW cater to diverse landscaping needs, providing users with efficiency, ease of use, and reliability. These models embody Snapper's commitment to quality, making them ideal choices for both residential and professional applications in lawn care.
Top Page Image Contents